首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
Measuring the performance of a sports surface is typically derived from a series of field and laboratory tests that assess the playing properties under simulated game conditions. However, from a player’s perspective their own comfort and confidence in the surface and its playing characteristics are equally if not more important. To date no comparative study to measure playing preference tests has been made. The aim of this research was to develop a suitable method for eliciting player perceptions of field hockey pitches and determine the key themes that players consider when assessing field hockey pitches. To elicit meaningful unbiased human perceptions of a playing surface, an individual subjective analysis was carried out, using interviews and inductive analysis of the recorded player statements. A qualitative analysis of elite hockey players (n = 22) was performed to obtain their perceptions immediately after a competitive match. The significant surface characteristics that emerged as part of an inductive analysis of their responses were grouped together and formed five general themes or dimensions: player performance, playing environment, pitch properties, ball interaction and player interaction. Each dimension was formed from a hierarchy of sub-themes. During the analysis, relationships between the dimensions were identified and a structured relationship model was produced to highlight each relationship. Players’ responses suggested that they perceived differences between pitches and that the majority of players considered a ‘hard’ pitch with a ‘low’ ball bounce facilitating a ‘fast’ game speed was desirable. However, further research is required to understand the relative importance of each theme and to develop appropriate measurement strategies to quantify the relevant engineering properties of pitch materials.  相似文献   

2.
There has been significant technological advancement in the game of tennis over the past two decades. In particular, tennis rackets have changed in size, shape and material composition. The effects of these changes on ball rebound speed have been well documented, but few studies have considered the effects on ball angular velocity. The purpose of this study was to investigate the effects of three factors on post-impact ball spin. Tennis balls were projected at three velocities toward a clamped racket simulating three levels of stiffness and strung at three string tensions. The angular velocity of each tennis ball was measured from stroboscopic images during an oblique impact with the racket. A three-way factorial ANOVA revealed significant (P < 0.01) differences in the post-impact angular velocity for string tension, racket stiffness and impact velocity, as well as two-way interactions between string tension and impact velocity, and between racket stiffness and impact velocity. The possibility of tangential elastic strain energy being stored in the racket and ball was evident in low impact velocity trials. These displayed a post-impact angular velocity where the circumference of the ball was translating faster than the relative velocity between the ball’s centre of mass and the string surface. It was concluded that increasing the relative impact velocity between the racket and ball was the best means of increasing the post-impact angular velocity of the tennis ball.  相似文献   

3.
Eighteen elite male tennis players were tested to determine their ability to identify string tension differences between rackets strung from 210 N (47 lb) to 285 N (64 lb). Each player impacted four tennis balls projected from a ball machine before changing rackets and repeating the test. Eleven participants (61%) could not correctly detect a 75 N (17 lb) difference between rackets. Only two participants (11%) could correctly detect a 25 N (6 lb) difference. To establish whether varying string tensions affected ball rebound dynamics, the ball’s rebound speed and landing position were analysed. The mean rebound ball speed was 117 km h−1, with only the trials from the 210 N racket producing significantly lower (P < 0.05) rebound speeds than the 235 N and 260 N rackets. This is contrary to previous laboratory-based tests where higher rebound speeds are typically associated with low-string tensions. The anomaly may be attributable to lower swing speeds from participants as they were not familiar with such a low string tension. Ball placement did not appear related to string tension, with the exception of more long errors for the 235 N racket and fewer long errors for the 285 N racket. It was concluded that elite male tennis players display limited ability to detect changes in string tension, impact the ball approximately 6% faster than advanced recreational tennis players during a typical rallying stroke, and that ball placement is predominantly unrelated to string tension for elite performers.  相似文献   

4.
This paper investigates the nature of the power point in tennis. A series of static racket impacts and a polynomial fit were used to simulate four different racket shots with increasing amounts of angular velocity—identifying the true ‘power point’ for each shot. A rigid body model was used to define the ‘ideal point’ for each shot—the impact point which theoretically yields maximum outbound ball velocity. Comparing theory with experiment revealed that the ‘ideal point’ is most accurate for impacts around the racket’s node point (the rigid body model does not account for frame vibration). Previous research has shown that tennis players aim to strike the node point of the racket. The concept of the ideal point has potential in tuning the weight distribution of a racket to a player’s shot type. If the ‘ideal point’ exists at the racket node point for a player’s typical forehand shot, then outbound ball velocities can be maximised.  相似文献   

5.
Abstract

The purpose of this study was to investigate whether performance level and ball spin affect arm and racket kinematics of the table tennis topspin forehand. Nine advanced and eight intermediate male table tennis players hit topspin forehands against light and heavy backspins. Five high-speed video cameras were used to record their strokes at 200 fps. Contributions of joint rotations to the racket speed, the racket kinematics at ball impact, the time required for racket acceleration and the maximum slope of the racket speed-time curve (s max) were determined. The advanced players showed a significantly larger contribution of lower trunk axial rotation to the racket speed at impact and a significantly larger value of smax, and tended to require a less time for racket acceleration than the intermediate players. The racket speed at impact was not significantly different between the two player groups. The players adjusted the racket face angle rather than the inclination of the racket path at impact to the different ball spins. The results suggest that the ability to accelerate the racket in less time in the topspin forehand against backspin balls may be an important factor that affects the performance level.  相似文献   

6.
A forward dynamics computer simulation for replicating tennis racket/ball impacts is described consisting of two rigid segments coupled with two degrees of rotational freedom for the racket frame, nine equally spaced point masses connected by 24 visco-elastic springs for the string-bed and a point mass visco-elastic ball model. The first and second modal responses both in and perpendicular to the racket string-bed plane have been reproduced for two contrasting racket frames, each strung at a high and a low tension. Ball/string-bed normal impact simulations of real impacts at nine locations on each string-bed and six different initial ball velocities resulted in <3% RMS error in rebound velocity (over the 16–27 m/s range observed). The RMS difference between simulated and measured oblique impact rebound angles across nine impact locations was 1°. Thus, careful measurement of ball and racket characteristics to configure the model parameters enables researchers to accurately introduce ball impact at different locations and subsequent modal response of the tennis racket to rigid body simulations of tennis strokes without punitive computational cost.  相似文献   

7.
The kinematics of a badminton racket during a smash stroke was observed in this study with the purpose of investigating stroke dynamics and racket behaviour. Motion capture measurements of the racket during several smash strokes performed by three players of different skill levels indicated a clear increase in racket velocity at impact with increasing skill level. Variations between translational and rotational contributions to the impact speed could also be seen between the players. The advanced player produced a much higher peak angular velocity and also relied much less on translation, with a translational velocity of only 8% of the total velocity versus the 20% for the recreational player. It is proposed that, as an alternative to shuttlecock speeds, racket head speed measurements can be used as an indicator of performance, and can also provide some insight into the interaction between the racket and player.  相似文献   

8.
ABSTRACT

To maintain the accuracy of squash shots under varying conditions, such as the oncoming ball’s velocity and trajectory, players must adjust their technique. Although differences in technique between skilled and less-skilled players have been studied, it is not yet understood how players vary their technique in a functional manner to maintain accuracy under varying conditions. This study compared 3-dimensional joint and racket kinematics and their variability between accurate and inaccurate squash forehand drives of 9 highly skilled and 9 less-skilled male athletes. During inaccurate shots, less-skilled players hit the ball with a more open racket, demonstrating a difference in this task-relevant parameter. No joint kinematic differences were found for accuracy for either group. Coordinated joint rotations at the elbow and wrist both displayed a “zeroing-in” effect, whereby movement variability was reduced from the initiation of propulsive joint rotation to a higher consistency at ball-impact; potentially highlighting the “functionality” of the variability prior to the impact that enabled consistent task-relevant parameters (racket orientation and velocity) under varying conditions. Further, highly skilled players demonstrated greater consistency of task-relevant parameters at impact than less-skilled players. These findings highlight the superior ability of highly skilled players to adjust their technique to achieve consistent task-relevant parameters and a successful shot.  相似文献   

9.
Abstract

The deflection profiles of a badminton racket during strokes performed by elite and world-class badminton players were recorded by strain gauges and subsequently analysed to determine the role of shaft stiffness in racket performance. Deflection behaviour was consistent in all strokes across all players, suggesting a controlled use of racket elasticity. In addition, all impacts occurred within 100 ms of each other, a duration in which deflection velocity provides an increase in racket velocity, indicating that the players were able to use racket elasticity to their advantage. Since deflection behaviour is a product of the racket–player interaction, further work is required to determine the effects of different racket properties and player techniques on the elastic response of rackets during strokes.  相似文献   

10.
Abstract

The effects of string tension and longitudinal racket flexibility on post-impact ball velocity were investigated in tennis. Six wooden rackets, two with flexible shafts, two with medium and two with stiff shafts were strung with synthetic gut at tensions of 245N (55 lb), 289N (65 lb) and 334N (75 lb).

A pneumatically driven racket-arm was triggered by a stimulus from a photo-electric cell positioned at the exit nozzle of a ball machine so that impact occurred with the racket perpendicular to the path of the ball. New tennis balls were fired to impact each racket at the geometric center of the strings and 5 cm above the geometric center. The average horizontal velocity of the ball, both before and after impact, was determined using stroboscope photography.

A significant interaction between racket stiffness and string tension was recorded for an inward ball velocity of 22.7 m/s and a racket velocity of approximately 6.8 m/s. String tension had no significant influence on rebound velocity for a stiff racket following impact with a moving racket. Medium and flexible rackets produced the highest coefficients of restitution when strung at 245N (55 lb) compared to 289N (65 lb) and 334N (75 lb).  相似文献   

11.
  相似文献   

12.
Whole body kinematics of the tennis serve have been reported extensively in the literature, yet comparatively less information exists regarding the kinematic characteristics of the swing and toss. In attempting to develop consistency in placement of the toss and racket trajectory, coaches will often decompose the serve and practice it in separate parts. A 22-camera VICON MX motion analysis system, operating at 250 Hz, captured racket, ball and hand kinematics of the serves of five elite junior players under three conditions. The conditions were flat first serves (FS) directed to a 1 × 1 m target bordering the ‘T’ of the deuce service box, a ball toss (BT) in isolation and a free swing (SW) in isolation. Players were instructed to perform BT and SW as in the FS. Paired t-tests assessed within-group differences in hand, racket and ball kinematics between the discrete skill and the two decomposed conditions. Vertical displacement of the ball at its zenith increased significantly during BT compared with the FS and temporal associations between racket and ball motion during the FS (r = 0.861) were affected during task decomposition. This study questions the pervasive use of task decomposition in the development of the tennis serve.  相似文献   

13.
The kinematics of the racket and ball near impact in tennis forehands were studied to document typical variation in successful and unsuccessful shots, in order to determine biomechanically meaningful differences in advanced players and confirm models of groundstroke trajectories. Seven tennis players (six males and one female) were videoed from the side at 180 Hz as they performed 40 forehand drives on an indoor tennis court. Vertical plane kinematics of the racket and ball near impact were analysed for sub samples of successful and unsuccessful shots for each subject. Most racket kinematic variables were very consistent (mean CV< 6.3%) for successful shots, so bio mechanically meaningful differences in angles and velocities of the racket and ball (3° and 2 m s−1) near impact could be detected between successful and unsuccessful shots. Four subjects tended to miss long and three subjects missed shots in the net that were reflected in initial ball trajectories. Mean (SD) initial trajectories for long shots were 9.8° (1.4°), while netted shots were 0.7° (1.1°) above the horizontal. The initial ball trajectories and margins for error for these subjects were smaller than those previously reported (Brody, 1987) because players tended to select mean ball trajectories close to one error than another, differing amounts of topspin, or incorrect lift and drag coefficients for tennis balls had not been published when this model was created. The present data can be used to confirm if recent models (Cookeet al., 2003; Dignallet al., 2004) more closely match actual performance by advanced players.  相似文献   

14.
Whole body kinematics of the tennis serve have been reported extensively in the literature, yet comparatively less information exists regarding the kinematic characteristics of the swing and toss. In attempting to develop consistency in placement of the toss and racket trajectory, coaches will often decompose the serve and practice it in separate parts. A 22-camera VICON MX motion analysis system, operating at 250 Hz, captured racket, ball and hand kinematics of the serves of five elite junior players under three conditions. The conditions were flat first serves (FS) directed to a 1 x 1 m target bordering the 'T' of the deuce service box, a ball toss (BT) in isolation and a free swing (SW) in isolation. Players were instructed to perform BT and SW as in the FS. Paired t-tests assessed within-group differences in hand, racket and ball kinematics between the discrete skill and the two decomposed conditions. Vertical displacement of the ball at its zenith increased significantly during BT compared with the FS and temporal associations between racket and ball motion during the FS (r = 0.861) were affected during task decomposition. This study questions the pervasive use of task decomposition in the development of the tennis serve.  相似文献   

15.
The aim of this study was to compare the pre- and post-impact three-dimensional kinematics of the ball and racquet during first and second serves performed by elite tennis players. Data were collected from four male and four female right-handed professional players during competition using two high-speed cameras (200 Hz). For each player, one first serve and one second serve from the 'deuce' or right service court that landed within the specified target area were analysed. To test for significant differences between the first and second serves, Wilcoxon tests (P < or = 0.05) were performed on selected parameters. The results indicate that the ball travelled forward and to the left during the flight phase of the toss in all but one trial. The average pre-impact ball forward location for the first serve was significantly more in front and had a higher associated forward ball velocity than the corresponding values for the second serve. On average, the decrease in post-impact ball speed from the first to the second serve was 24.1%. No significant differences between the first and second serves were found in the pre-impact racquet head speed and orientation, which was represented as a unit vector perpendicular to the racquet face. The major adjustments made by the players when going from the first to second serve were a decrease in pre-impact ball forward location (P < or = 0.01) and an increase in the pre-impact racquet vertical and lateral velocities (both P < or = 0.05). This implies that the players tossed the ball closer to the body and imparted topspin and sidespin on the ball by changing the racquet vertical and lateral velocities when going from the first to the second serve.  相似文献   

16.
In this study, we examined the relationship between upper limb joint movements and horizontal racket head velocity to clarify joint movements for developing racket head speed during tennis serving. Sixty-six male tennis players were videotaped at 200 Hz using two high-speed video cameras while hitting high-speed serves. The contributions of each joint rotation to horizontal racket velocity were calculated using vector cross-products between the angular velocity vectors of each joint movement and relative position vectors from each joint to the racket head. Major contributors to horizontal racket head velocity at ball impact were shoulder internal rotation (41.1%) and wrist palmar flexion (31.7%). The contribution of internal rotation showed a significant positive correlation with horizontal racket head velocity at impact (r = 0.490, P < 0.001), while the contribution of palmar flexion showed a significant negative correlation (r = - 0.431, P < 0.001). The joint movement producing the difference in horizontal racket head velocity between fast and slow servers was shoulder internal rotation, and angular velocity of shoulder internal rotation must be developed to produce a high racket speed.  相似文献   

17.
Modern tennis rackets are manufactured from composite materials with high stiffness-to-weight ratios. In this paper, a finite element (FE) model was constructed to simulate an impact of a tennis ball on a freely suspended racket. The FE model was in good agreement with experimental data collected in a laboratory. The model showed racket stiffness to have no influence on the rebound characteristics of the ball, when simulating oblique spinning impacts at the geometric stringbed centre. The rebound velocity and topspin of the ball increased with the resultant impact velocity. It is likely that the maximum speed at which a player can swing a racket will increase as the moment of inertia (swingweight) decreases. Therefore, a player has the capacity to hit the ball faster, and with more topspin, when using a racket with a low swingweight.  相似文献   

18.
Recreational tennis players tend to have higher incidence of tennis elbow, and this has been hypothesised to be related to one-handed backhand technique and off-centre ball impacts on the racket face. This study aimed to investigate for a range of participants the effect of off-longitudinal axis and off-lateral axis ball–racket impact locations on racket and forearm joint angle changes immediately following impact in one-handed tennis backhand groundstrokes. Three-dimensional racket and wrist angular kinematic data were recorded for 14 university tennis players each performing 30 “flat” one-handed backhand groundstrokes. Off-longitudinal axis ball–racket impact locations explained over 70% of the variation in racket rotation about the longitudinal axis and wrist flexion/extension angles during the 30 ms immediately following impact. Off-lateral axis ball–racket impact locations had a less clear cut influence on racket and forearm rotations. Specifically off-longitudinal impacts below the longitudinal axis forced the wrist into flexion for all participants with there being between 11° and 32° of forced wrist flexion for an off-longitudinal axis impact that was 1 ball diameter away from the midline. This study has confirmed that off-longitudinal impacts below the longitudinal axis contribute to forced wrist flexion and eccentric stretch of the wrist extensors and there can be large differences in the amount of forced wrist flexion from individual to individual and between strokes with different impact locations.  相似文献   

19.
In this study, we examined the relationship between upper limb joint movements and horizontal racket head velocity to clarify joint movements for developing racket head speed during tennis serving. Sixty-six male tennis players were videotaped at 200 Hz using two high-speed video cameras while hitting high-speed serves. The contributions of each joint rotation to horizontal racket velocity were calculated using vector cross-products between the angular velocity vectors of each joint movement and relative position vectors from each joint to the racket head. Major contributors to horizontal racket head velocity at ball impact were shoulder internal rotation (41.1%) and wrist palmar flexion (31.7%). The contribution of internal rotation showed a significant positive correlation with horizontal racket head velocity at impact (r = 0.490, P < 0.001), while the contribution of palmar flexion showed a significant negative correlation (r = ? 0.431, P < 0.001). The joint movement producing the difference in horizontal racket head velocity between fast and slow servers was shoulder internal rotation, and angular velocity of shoulder internal rotation must be developed to produce a high racket speed.  相似文献   

20.
The aim of this article is to characterise the extent to which the dynamic behaviour of a tennis racket is dependent on its mechanical characteristics and the modulation of the player’s grip force. This problem is addressed through steps involving both experiment and modelling. The first step was a free boundary condition modal analysis on five commercial rackets. Operational modal analyses were carried out under “slight”, “medium” and “strong” grip force conditions. Modal frequencies and damping factors were then obtained using a high-resolution method. Results indicated that the dynamic behaviour of a racket is not only determined by its mechanical characteristics, but is also highly dependent on the player’s grip force. Depending on the grip force intensity, the first two bending modes and the first torsional mode frequencies respectively decreased and increased while damping factors increased. The second step considered the design of a phenomenological hand-gripped racket model. This model is fruitful in that it easily predicts the potential variations in a racket’s dynamic behaviour according to the player’s grip force. These results provide a new perspective on the player/racket interaction optimisation by revealing how grip force can drive racket dynamic behaviour, and hence underlining the necessity of taking the player into account in the racket design process.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号