首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 233 毫秒
1.
针对雾霾天气下有雾图像能见度水平低、在低光照条件下无法有效获得图像细节信息等问题,提出一种基于暗通道先验的Retinex去雾算法。首先采用改进的暗通道先验算法对有雾图像进行初步处理,得到初步复原图像;其次,在得到的去雾图像上进行Retinex图像增强,利用引导滤波对照度分量进行平滑处理,求出反射分量;之后利用S型曲线对反射分量进行增强,以增强图像细节信息,并采用全局自适应与改进的Gamma函数对对比度及亮度进行拉伸调整;最后,运用颜色恢复函数还原色彩。实验结果表明,该算法在平均亮度和对比度方面都得到一定程度的提高,分别至少提高了1.79%和1.07%,平均梯度和信息熵分别至少提高了4.80%和4.79%。  相似文献   

2.
工程施工图像在获取、传输等过程中存在一定程度的噪声干扰。通过对标准中值滤波算法进行分析,得到了一种基于自适应开关中值的图像滤波算法,能够在去除椒盐噪声的同时保持图像细节。该算法用迭代实现了开关中值滤波算法中阈值的自动选取,可有效提高噪声点检测的准确率。通过MATLAB仿真实验,证实了该算法相较于传统滤波算法能够更好地保护图像细节和改进图像清晰度。  相似文献   

3.
为了降低图像噪声对分水岭算法产生的过分割的影响,在分水岭算法之前进行滤波预处理.而滤波算法在平滑噪声的同时会丢失图像的边缘结构信息,为了保持在滤波预处理过程中图像的边缘结构信息,使用相似性度量的滤波函数,并且相似性度量从基于像素点的方法扩展到基于图像块的方法.  相似文献   

4.
数学形态学滤波属于非线性滤波,针对传统的线性滤波对图像边缘等细节特征容易模糊的缺点,本文提出一种基于灰度形态学的自适应加权复合滤波优化算法,采用凸性多尺度结构元素对灰度图像进行多级形态开闭运算,根据形态滤波等幂特性,实现结构元素序列的自适应加权复合滤波,并对滤波效果进行PSNR评价,实验仿真结果表明该复合滤波算法在保留图像细节特征的同时能有效去除噪声,提高了图像信噪比.  相似文献   

5.
脉冲噪声的自适应滤除方法   总被引:1,自引:0,他引:1  
为了在滤除图像噪声的同时更好的保护图像的细节,文中提出了一种基于非线性自适应滤波结构的改进算法。用中心加权中值滤波算法代替原方法中的中值滤波算法以及中值滤波代替均值滤波作为最终滤波结果输出。这种算法与同类算法相比,具有更好的滤波性能并能更好的保护细节,其效果明显优于中值滤波算法。  相似文献   

6.
研究了一种空域中的图像分解技术,进而利用该种分解方法 ,探讨了图像滤波算法.提出的图像分解方法 的主要思想是:利用类型确定的滤波器(如低通)对原始图像滤波,将图像分解为高频和低频两部分,在对分解得到的低频或高频成分进行同样的处理,继续这一过程,图像便可分解成不同频率分量的图层之和.进而在各个图层上进行相应的滤波处理,最后利用逆变换得到最终的结果 .  相似文献   

7.
雾霾天气条件下图像采集因降质严重,导致后期图像处理复杂性提高。为此,提出一种采用暗原色先验理论与WLS滤波相结合去雾的改进算法。采用WLS滤波代替传统的软抠图法以修复大气透射率,针对去雾后图像较实际暗沉的问题,提出一种新的自适应图像增强方法,通过对去雾后的图像自适应非线性叠加,实现了图像增强的效果。实验结果表明,相比于其它传统算法,该算法能够在保持图像边缘细节的同时,提高图像的色彩质量,有效消除白色晕块,且计算复杂度低,图像还原逼真。  相似文献   

8.
重点介绍了自适应中值滤波算法以及两种改进的自适应中值滤波算法。针对这3种滤波算法,对含有不同密度椒盐噪声的图像进行去噪实验。结果表明:改进算法去噪效果明显、能有效保护图像细节,PSNR保持在25 d B以上;改进算法在高密度噪声时也能得到细节较为清晰的图像,PSNR比改进前的提高17 d B以上。  相似文献   

9.
为了有效地去除图像中的椒盐噪声,提高图像的质量,利用中值滤波算法进行去噪处理.分析了椒盐噪声的特性,阐述了中值滤波算法的去噪原理和优缺点.通过实验从主观评价和客观评价两方面对比了中值滤波和几种典型的图像去噪方法对椒盐噪声的去噪效果,并进一步分析了不同窗口大小的中值滤波对椒盐噪声的去噪效果.实验结果表明,中值滤波算法能很好地去除图像中的椒盐噪声.  相似文献   

10.
极值中值滤波法在炉内火焰图像预处理中的应用   总被引:1,自引:0,他引:1  
为消除火焰图像中的脉冲噪声,本文采用基于极值的中值滤波算法对信号和噪声先进行判别,再进行滤波处理;并采用归一化均方误差和信噪比作为该算法的客观评价尺度.结果表明,该算法在有效的消除脉冲噪声的同时,能很好保留火焰图像的边缘信息,较其他滤波算法有更好的滤波性能.  相似文献   

11.
A new algorithm is proposed for restoring disocclusion regions in depth-image-based rendering (DIBR) warped images. Current solutions include layered depth image (LDI), pre-filtering methods, and post-processing methods. The LDI is complicated, and pre-filtering of depth images causes noticeable geometrical distortions in cases of large baseline warping. This paper presents a depth-aided inpainting method which inherits merits from Criminisi's inpainting algorithm. The proposed method features incorporation of a depth cue into texture estimation. The algorithm efficiently handles depth ambiguity by penalizing larger Lagrange multipliers of flling points closer to the warping position compared with the surrounding existing points. We perform morphological operations on depth images to accelerate the algorithm convergence, and adopt a luma-first strategy to adapt to various color sampling formats. Experiments on test multi-view sequence showed that our method has superiority in depth differentiation and geometrical loyalty in the restoration of warped images. Also, peak signal-to-noise ratio (PSNR) statistics on non-hole regions and whole image comparisons both compare favorably to those obtained by state of the art techniques.  相似文献   

12.
A novel single-channel blind separation algorithm for permuted motion blurred images is proposed by using blind restoration in this paper. Both the motion direction and the length of the point spread function (PSF) are estimated by Radon transformation and extrema a detection. Using the estimated blur parameters, the permuted image is restored by performing the L-R blind restoration method. The permutation mixing matrices can be accurately estimated by classifying the ringing effect in the restored image, thereby the source images can be separated. Simulation results show a better separation efficiency for the permuted motion blurred image with various permutation operations. The proposed algorithm indicates a better performance on the robustness against Gaussian noise and lossy JPEG compression.  相似文献   

13.
依据光伏阵列故障状态红外图像的特点,提出了一种高效基于迭代的两级阈值分割算法。实验表明:该算法能较好地分割出光伏阵列中存在的正常、故障、老化三种区域,同时算法以乘法和加法运算为主,便于DSP的高速运算。最后,采用TMS320 DSP算法标准(XDAIS)对分割算法进行创建与封装,极大地方便了系统集成。  相似文献   

14.
提出了一种基于形态学的线粒体电镜图像边缘检测算法。首先对图像按需求裁剪,然后根据像素间灰度差异关系实现灰度图的二值化,再利用一套组合的形态学操作实现抽出背景、去除目标区域噪声、平滑边缘,最后通过去除所有内部的点获得线粒体的边缘。实验结果表明,对于电镜图像的线粒体边缘检测,该算法比现有的算法更有效,更接近人工检测的结果。  相似文献   

15.
An efficient adaptive approximation demosaicking algorithm based on the sampled edge pattern was presented for mosaic images from Bayer color filter array. The proposed algorithm determined edge patterns by four nearest green values surrounding the green interpolation location. Then according to the edge patterns, different adaptive interpolation steps were applied. Simulations on 12 Kodak photos and 15 IMAX high-quality images showed that the proposed method outperformed the other four demosaicking methods (bilinear, effective color interpolation, Lu’s method and Chen’s method) for average color peak signal to noise ratios and maintained a relatively low complexity owing to constant color-difference interpolation step and a reasonable terminating condition of iteration.  相似文献   

16.
针对边缘检测中图像直方图成单峰状态的情况,提出一种改进的canny边缘检测算法.传统canny算子的高低阈值一般人为地设定固定值,当一幅图像的灰度级集中在某一区域时,容易造成虚假边缘;算法提出用最小交叉熵计算图像的高低阈值,得到理想的阈值;解决了传统canny算法在单峰直方图边缘检测不够理想的问题.实验结果表明,算法抑制噪声能力较强,有效地提高了边缘检测的鲁棒性.  相似文献   

17.
To produce a smoother and more natural interpolated image, and to preserve and enhance original image details, we defined three perception-based local statistic parameters, namely contrast, noise visibility, and edge strength based on three psychophysical principles, including Weber's Law, Fechner's Law, and Stevens' Power Law, and integrated these parameters into a fuzzy logic system to set up an advanced image interpolation algorithm. Application of this algorithm to detect edge behaviors and local statistical information of images demonstrated better noise removal ability and obtained sharper edges than traditional image interpolation algorithems such as nearest neighbor, bilinear and bicubic interpolation methods.  相似文献   

18.
针对医学CT图像的特点,本文提出了一种基于统计分析的算法先对CT图像进行预处理,并且保存为常用的BMP格式;然后利用K均值聚类算法提取目标组织或者区域.从实验结果可以看出,上述方法是可行的,达到了较好的分割效果,可以满足三维重建的要求.  相似文献   

19.
提出了一种利用修改的有序子集(MOS)方法改进空间交替广义期望最大(SAGE)算法收敛性的方法.新的可变有序子集算法(MOS-SAGE)通过修改投影数据的数目和子集的排列循序加速收敛速度.其中每一个子集中的投影数目按2,4,8,16,32,64来排列以便重建算法首先恢复高频部分信息,然后重建低频部分信息.另外新算法还使相邻子集尽可能分离以减少投影间的相关性,达到加速收敛的效果.实验中,运用MOS-SAGE算法对计算机仿真的PET投影数据和实际的临床数据进行重建.几种误差分析结果表明,MOS-SAGE算法的收敛性能比SAGE算法和有序子集期望最大算法(OSEM)要快,重建后的图像更接近仿真用的模板图像.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号