首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 593 毫秒
1.
An adaptive terminal sliding mode control (SMC) technique is proposed to deal with the tracking problem for a class of high-order nonlinear dynamic systems. It is shown that a function augmented sliding hyperplane can be used to develop a new terminal sliding mode for high-order nonlinear systems. A terminal SMC controller based on Lyapunov theory is designed to force the state variables of the closed-loop system to reach and remain on the terminal sliding mode, so that the output tracking error then converges to zero in finite time which can be set arbitrarily. An adaptive mechanism is introduced to estimate the unknown parameters of the upper bounds of system uncertainties. The estimates are then used as controller parameters so that the effects of uncertain dynamics can be eliminated. It is also shown that the stability of the closed-loop system can be guaranteed with the proposed control strategy. The simulation of a numerical example is provided to show the effectiveness of the new method. Project supported by the National Outstanding Youth Science Foundation of China (NSFC:69725005) and the Zhejiang, Provincial Natural Science Key Foundation of China (ZD9905)  相似文献   

2.
考虑了一类永磁同步电动机的有限时间跟踪控制问题.在控制器设计中利用中继切换控制使系统在给定的当前控制律的作用下运行到某一特定状态(或某一特定区域)后,控制律被切换到有限时间收敛的终端滑模控制器,使得系统在有限时间内达到平衡状态.有限时间跟踪控制器的设计保证了闭环系统所有信号的有界性和平衡点的全局稳定性,以及系统在有限时间内精确地跟踪给定的参考信号.最后通过一个数值仿真验证了所提算法的正确有效性.  相似文献   

3.
研究MIMO离散非线性系统的自适应Backstepping控制,对包含两个三阶子系统的MIMO系统推出稳定的自适应控制器设计,并利用关键性引理和投影算法的性质证明了闭环系统的所有信号有界和保证跟踪性能.  相似文献   

4.
基于积分型李亚普诺夫函数的直接自适应模糊控制   总被引:3,自引:0,他引:3  
针对一类具有未知下三角形函数控制增益矩阵的非线性系统,根据滑模控制原理,并利用I型模糊系统的逼近能力,提出了一种直接自适应模糊控制器设计的新方案.通过引入积分型李亚普诺夫函数及逼近误差自适应补偿项,证明了闭环系统是全局稳定的,跟踪误差收敛到零.仿真结果表明了该方法的有效性.  相似文献   

5.
An adaptive backstepping sliding mode control is proposed for a class of uncertain nonlinear systems with input saturation.A command filtered approach is used to prevent input saturation from destroying the adaptive capabilities of neural networks (NNs).The control law and adaptive updating laws of NNs are derived in the sense of Lyapunov function,so the stability can be guaranteed even under the input saturation.The proposed control law is robust against the disturbance,and it can also eliminate the impact of input saturation.Simulation results indicate that the proposed controller has a good performance.  相似文献   

6.
This paper presents a sliding mode (SM) based identifier to deal with the parameter identification problem for a class of parameter uncertain nonlinear dynamic systems with input nonlinearity. A sliding mode controller (SMC) is used to ensure the global reaching condition of the sliding mode for the nonlinear system; an identifier is designed to identify the uncertain parameter of the nonlinear system. A numerical example is studied to show the feasibility of the SM controller and the asymptotical convergence of the identifier. Project supported by the National Natural Science Foundation of China(No. 69974035) and Zhejiang Provincial Natural Science Key Foundation of China (ZD9905)  相似文献   

7.
考虑了一类永磁同步电动机的终端滑模控制器设计问题.在控制器设计中利用中继切换控制使系统在给定的当前控制律的作用下运行到某一特定状态(或某一特定区域)后,控制律被切换到有限时间收敛的终端滑模控制器,使得系统在有限时间内达到平衡状态.终端滑模控制器的设计保证了闭环系统所有信号的有界性和平衡点的全局稳定性,以及系统在有限时间内精确地跟踪给定的参考信号.最后,通过一个数值仿真验证了所提算法的正确有效性.  相似文献   

8.
本文主要研究永磁同步电机伺服系统的位置跟踪问题。根据矢量控制原理,针对d轴电压,设计了一阶滑模控制器,将使d轴电流在有限时间到达0。针对q轴电压,基于滑模控制理论,设计了积分型高阶滑模控制器。由于系统中存在不确定性参数,设计了基于神经网络的q轴电压滑模控制器。理论分析表明,在所设计的控制器作用下,可以保证位置系统的精确跟踪控制。仿真结果表明了该控制方案具有较好的收敛性和抗干扰性能。  相似文献   

9.
文中考虑了一类永磁同步电动机的终端滑模控制器设计问题.在控制器设计中利用中继切换控制使系统在给定的当前控制律的作用下运行到某一特定状态(或某一特定区域)后,控制律被切换到有限时间收敛的终端滑模控制器,使得系统在有限时间内达到平衡状态.终端滑模控制器的设计保证了闭环系统所有信号的有界性和平衡点的全局稳定性,以及系统在有限时间内精确地跟踪给定的参考信号.最后,通过一个数值仿真验证了所提算法的正确有效性.  相似文献   

10.
针对一类具有高阶关联项的大系统提出了一种新型控制器———模糊神经网络滑模控制器,该控制器将模糊神经网络与滑模控制器有机结合,消除了一般滑模控制器中的高频颤动现象,同时不需要知道系统中的不确定性和扰动的上界.实例仿真说明了控制器不仅能得到好的控制效果,而且具有比一般滑模控制器强的鲁棒性  相似文献   

11.
针对一类具有未知饱和模型的单输入单输出非线性系统的控制问题,根据滑模控制原理和多层神经网络的逼近能力,提出了一种直接自适应神经网络控制器的设计新方案。该方法将控制增益推广到未知函数,通过补偿饱和模型方法取消了饱和模型各参数已知的条件。鲁棒项的引入消除了建模误差和参数估计误差的影响。理论分析证明了闭环系统是半全局一致终结有界,跟踪误差收敛到零的邻域内。仿真结果进一步表明所提控制方法的有效性。  相似文献   

12.
主要研究了任意转换下带有未知迟滞的随机非线性系统的自适应跟踪控制问题。采用变量分离方法对状态变量进行分解,使其在任意转换之下逼近于一个光滑函数。通过把径向基函数神经网络普遍近似性能与自适应反步法相结合,构造出一个在任意转换之下的自适应神经控制算法。所设计的控制器保证了所有闭路系统信号半全局一致有界,并且,跟踪误差最终收敛到一个原点小邻域内,提出的方案更好地保证了在任意转换之下系统的稳定性。  相似文献   

13.
In this paper,a hybrid adaptive compensation control scheme is proposed to compensate the friction occurrence and other nonlinear disturbance factors that exist in the high-precision servo system.An adaptive compensation controller with a dual-observer structure is designed,while the LuGre dynamic friction model with non-uniform parametric uncertainties characterizes the friction torque.Considering the influence of the periodic disturbance torque and parametric uncertainties,fuzzy systems and a robust term are employed.In this way,the whole system can be treated as a simple linear model after being compensated,then the proportional-derivative (PD) control law is applied to enhancing the control performance.On the basis of Lyapunov stability theory,the global stability and the asymptotic convergence of the tracking error are proved.Numerical simulations demonstrate that the proposed scheme has potentials to restrain the impact of disturbance and improving the tracking performance.  相似文献   

14.
研究了一类含有离散时滞和分布时滞的不确定中立系统的时滞依赖保性能控制。所设计的控制器对于所允许的不确定参数和时滞,能保证闭环系统是渐近稳定的且闭环的性能函数值不超过某个给定上界。最后,数值例子说明了所设计控制器的有效性和可行性。  相似文献   

15.
研究目的:四轮独立驱动汽车四个车轮的电机转矩可以正、反向输出,有必要对其底盘集成控制系统进行针对性设计以保证各车轮间的协调运作。集成控制系统一般可以分为上层运动控制器和下层力分配器。对于运动控制器的设计,同类研究一般采用滑模控制方法来处理汽车运动的非线性特征,其中终端滑模控制因具有高的稳态精度和有限时间收敛的特点而成为研究热点。对于力分配器的设计,通常方法不能在保证运算效率的同时考虑到执行器的约束,从而很难应用于实际。本文采用终端滑模控制方法来设计运动控制器,通过分析驾驶员操作行为从而更好地追踪理想的车辆运动目标;并提出一种简单有效的转矩分配控制策略,通过考虑轮胎附着极限从而将运动总力分配至四个车轮上。创新要点:本文创新性地将终端滑模控制应用到底盘集成控制系统以实现车辆纵向、侧向及横摆运动的联合控制;本文提出了一种新颖的转矩分配控制策略,将复杂的有约束控制分配问题分解至若干个简单的无约束分配子问题。研究方法:本文采用分层式协调控制方案(图1),应用非奇异和全局快速终端滑模控制方法设计运动控制器,提出一种基于伪逆矩阵的有约束转矩分配策略,应用驾驶员最优预瞄加速度模型来描述和分析人-车闭环系统的运动响应,通过MATLAB/Simulink和CarSim的联合仿真对所设计的四轮独立驱动汽车转矩分配方法进行对比验证。所设定的三个仿真工况包括:开环方向盘角阶跃输入(图6、7及表2)、闭环双移线工况(图8–10)和闭环对开路面制动(图11–15),分别用以测试车辆横摆、侧向及纵向方向上的动力学响应。重要结论:本文提出的基于终端滑模控制的四轮独立驱动汽车转矩分配方法将车辆的稳态转向特性由不足转向转变为中性转向,驾驶员从而?  相似文献   

16.
~~under the sliding mode controller. It shows that the sliding mode controller yield almost perfect tracking to the reference model. It can be seen in Fig.6 that the acceleration of sprung mass under sliding mode controller is controlled within ?.7 m/s2. Fig.7 shows the robustness and stability of the sliding mode controller to the parameter variations of the system to be controlled, in this case, a relative decrease of 10 % in the sprung mass and a relative increase of 15 % in the stiffness o…  相似文献   

17.
A new sliding mode controller for semi-active suspension system with magnetorheological (MR) damper is presented in this paper. In the proposed sliding mode controller, a semi-active suspension based on the skyhook damper system is chosen as the reference model to be followed, and the control law is so determined that the asymptotically stable error dynamics occurs between the controlled state and the reference model state. Numerical simulations are carried out to study the performance of the new sliding mode controller. The results show that the proposed controller yields almost perfect tracking to the reference model and has a high robustness against model parameter uncertainties and disturbances.  相似文献   

18.
电流滞环跟踪PWM控制技术能较好地得到三相对称正弦波电流,以电流滞环跟踪PWM控制器为内环,转速外环调节器选用PI调节器,建立异步电动机双闭环调速系统.建立系统主电路及控制电路进行仿真模型,主电路由异步电动机模块、电动机测量单元模块、逆变器模块、直流电源、负载模块等组成,控制电路由转速给定信号、转速调节器、电流给定信号及电流滞环跟踪控制器等组成.仿真得到电流、转速及电磁转矩曲线,验证了方法的有效性.  相似文献   

19.
This paper presents a nonlinear robust control design method for a generic rotorcraft unmanned aerial vehicle(RUAV). The control objective is to let the RUAV track some pre-defined time-varying position and headingtrajectories. The proposed controller employs feedback linearization process to realize the dynamic decoupling controland applies adaptive sliding mode control to compensate for the parametric uncertainties and external disturbances.The global asymptotical stability is proved via stability analysis. Compared with the cascaded controller, the proposedcontroller demonstrates a superior tracking performance and robustness through numerical simulation in the presenceof parametric uncertainties and unknown disturbances.  相似文献   

20.
针对传统滑模变结构控制器(SMC)的抖振现象,提出了一种模糊自适应滑模控制方法.该方法采用模糊逻辑系统来逼近传统SMC中不连续的控制信号,以削弱其由于不连续切换引起的抖振.另外,为了补偿实际应用中系统的不确定性,给出了相应的自适应算法,以调节模糊系统的参数,并给出了算法的Lyapunov稳定性证明.最后,通过对一个感应电机位置控制的数值仿真计算,验证了方法的有效性.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号