共查询到19条相似文献,搜索用时 109 毫秒
1.
文章对专用玻璃量器测量的不确定度进行评估,分析了测量过程中存在的不确定度来源,并建立了测量模型,量化不确定度分量,求出合成不确定度和扩展不确定度。 相似文献
2.
3.
《内蒙古科技与经济》2017,(9)
建立了电子血压计静态压力示值误差测量不确定度的数学模型,对电子血压计静态压力测量过程中引入的不确定度进行分类和量化,较为全面地评定了各个不确定度分量,并求出了各个分量的不确定度,将它们进行合成,从而获得了测量结果的扩展不确定度。 相似文献
4.
5.
目的:分析用石墨炉原子吸收光谱法测定阿胶中铬的测量不确定度。方法:应用测量不确定度评定理论,结合实际的试验方法,建立数学模型,确定和计算测定过程各不确定度分量,分析总的相对不确定度。结果:阿胶中铬含量为1.1mg/kg,取包含因子k=2,其扩展不确定度为0.2mg/kg,最终测定阿胶中铬含量为(1.1±0.2)mg/kg;同时对影响测定结果的不确定度的各部分因素进行了量化。结论:影响测量结果的不确定度主要因素是回收率,标准曲线拟合引入的误差以及重复测定标准偏差其次,标准物质及其稀释过程引入的不确定度、环境条件等对测量结果的不确定度影响较小。 相似文献
6.
《内蒙古科技与经济》2015,(24)
对土壤中锶-90测量过程产生的不确定度进行分析,对其不确定度分量逐一进行量化,从而获得测量结果的合成相对不确定度和相对扩展不确定度。结果表明,对土壤中锶-90测量结果不确定度的贡献大的因素依次是仪器探测效率、化学回收率、取样质量、重复性测量。 相似文献
7.
一切测量结果都不可避免地具有不确定度。本文主要讲述在方便面食品中检测氯化钠含量的过程中由测量过程中的分量得到的测量结果的不确定度。 相似文献
8.
贾多 《内蒙古科技与经济》2014,(8):90+92-90
依据JJG908—2009《滑板式汽车侧滑检验台检定规程》和JJF1059.1—2012《测量不确定度评定与表示》,对滑板式汽车侧滑检验台示值误差测量结果进行了不确定度的评定,简单阐述了测量过程中产生的各分量对测量结果的影响,得到了测量结果的扩展不确定度。 相似文献
9.
10.
医院临床中血压计在测量时受到多种因素的影响,会引起测量过程中的不确定度。本文主要介绍血压计测量相关的概念、测量过程,并通过建立数学模型来对其不确定度进行评定。 相似文献
11.
噪声测量不确定度的引入是为了更有效、更准确地表征所测得的噪声,同时使所测的噪声能够达到质量控制的要求,测量结果必须结合其不确定度的大小才有实际意义。文章就实际工作中噪声的不确定度的分析与评定,分析了监测设备准确度引入的不确定度、计量校准设备的不确定度等因素对测量的影响,计算出了利用AWA6228多功能声级计所测量噪声合成标准不确定度为0.2d B。 相似文献
12.
文章依据JJG133-2005《汽车油罐车容量》和JJF1059.1-2012《测量不确定度评定与表示》对汽车油罐车容量测量不确定度进行分析与评定。 相似文献
13.
14.
15.
文章依据JJF1059-1999《测量不确定度评定与表示》计量技术规范的要求,结合检定工作实际,对电子计价秤示值误差测量结果的不确定度来源进行了分析,并详细介绍了不确定的评定方法。 相似文献
16.
17.
文章以接地装置特性参数测试系统的直流电阻测量为例介绍了其校准工作条件并对测量结果进行不确定度评定,供其他参数测量时参考。 相似文献
18.
Raúl Rigo-Bonnin Noelia Díaz-Troyano Laura García-Tejada Albert Marc-Galindo Míriam Valbuena-Asensio Francesca Canalias 《Biochemia medica : ?asopis Hrvatskoga dru?tva medicinskih biokemi?ara / HDMB》2021,31(1)
Clinicians request a large part of measurements of biological quantities that clinical laboratories perform for diagnostic, prognostic or diseases monitoring purposes. Thus, laboratories need to provide patient’s results as reliable as possible. Metrological concepts like measurement uncertainty and metrological traceability allow to know the accuracy of these results and guarantee their comparability over time and space. Such is the importance of these two parameters that the estimation of measurement uncertainty and the knowledge of metrological traceability is required for clinical laboratories accredited by ISO 15189:2012. Despite there are many publications or guidelines to estimate the measurement uncertainty in clinical laboratories, it is not entirely clear what information and which formulae they should use to calculate it. On the other hand, unfortunately, there are a small number of clinical laboratories that know and describe the metrological traceability of their results, even though they are aware of the lack of comparability that currently exists for patient’s results. Thus, to try to facilitate the task of clinical laboratories, this review aims to provide a proposal to estimate the measurement uncertainty. Also, different suggestions are shown to describe the metrological traceability. Measurement uncertainty estimation is partially based on the ISO/TS 20914:2019 guideline, and the metrological traceability described using the ISO 17511:2020. Different biological quantities routinely measured in clinical laboratories are used to exemplify the proposal and suggestions. 相似文献