首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
Sport-specific resistance training, through limb loading, can be a complimentary training method to traditional resistance training by loading the working muscles during all phases of a specific movement. The purpose of this study was to examine the acute effects of skating with an additional load on the skate, using a skate weight prototype, on kinematics, kinetics, and muscle activation during the acceleration phase while skating on a synthetic ice surface. 10 male hockey skaters accelerated from rest (standing erect with knees slightly bent) under four non-randomized load conditions: baseline 1 (no weight), light (0.9 kg per skate), heavy (1.8 kg per skate), and baseline 2 (no weight). Skating with additional weight caused athletes to skate slower (p < 0.001; η2 = 0.551), and led to few changes in kinematics: hip sagittal range of motion (ROM) decreased (2.2°; p = 0.032; η2 = 0.274), hip transverse ROM decreased (3.4°; p < 0.001; η2 = 0.494), ankle sagittal ROM decreased (2.3°; p = 0.022; η2 = 0.295), and knee sagittal ROM increased (7.8°; p < 0.001, η2 = 0.761). Overall, weighted skates decreased skating velocity, but athletes maintained similar muscle activation profiles (magnitude and trends) with minor changes to their skating kinematics.  相似文献   

2.
Ice hockey requires rapid transitions between skating trajectories to effectively navigate about the ice surface. Player performance relates in large part to effective change-of-direction manoeuvres, but little is known about how those skills are performed mechanically and the effect of equipment design on them. The purpose of this study was to observe the kinetics involved in those manoeuvres as well as to compare whether kinetic differences may result between two skate models of varying ankle mobility. Eight subjects with competitive ice hockey playing experience performed rapid lateral (90°) left and right change-of-direction manoeuvres. Kinetic data were collected using force strain gauge transducers on the blade holders of the skates. Significantly greater forces were applied by the outside skate (50–70% body weight, %BW) in comparison to the inside skate (12–24%BW, p < 0.05). Skate model and turn direction had no main effect, though significant mixed interactions between leg side (inside/outside) with skate model or turn direction (p < 0.05) were observed, with a trend for left-turn dominance. This study demonstrates the asymmetric dynamic behaviour inherent in skating change-of-direction tasks.  相似文献   

3.
The arm swing in hockey skating can have a positive effect on the forces produced by each skate, and the resulting velocity from each push off. The main purpose of this study was to measure the differences in ground reaction forces (GRFs) produced from an anteroposterior versus a mediolateral style hockey skating arm swing. Twenty-four elite-level female hockey players performed each technique while standing on a ground-mounted force platform, and all trials were filmed using two video cameras. Force data was assessed for peak scaled GRFs in the frontal and sagittal planes, and resultant GRF magnitude and direction. Upper limb kinematics were assessed from the video using Dartfish video analysis software, confirming that the subjects successfully performed two distinct arm swing techniques. The mediolateral arm swing used a mean of 18.38° of glenohumeral flexion/extension and 183.68° of glenohumeral abduction/adduction while the anteroposterior technique used 214.17° and 28.97° respectively. The results of this study confirmed that the mediolateral arm swing produced 37% greater frontal plane and 33% less sagittal plane GRFs than the anteroposterior arm swing. The magnitudes of the resultant GRFs were not significantly different between the two techniques; however, the mediolateral technique produced a resultant GRF with a significantly larger angle from the direction of travel (44.44°) as compared to the anteroposterior technique (31.60°). The results of this study suggest that the direction of GRFs produced by the mediolateral arm swing more closely mimic the direction of lower limb propulsion during the skating stride.  相似文献   

4.
The aims of the study were to: (1) adapt the "double-push" technique from inline skating to cross-country skiing; (2) compare this new skiing technique with the conventional skate skiing cross-country technique; and (3) test the hypothesis that the double-push technique improves skiing speed in a short sprint. 13 elite skiers performed maximum-speed sprints over 100 m using the double-push skate skiing technique and using the conventional "V2" skate skiing technique. Pole and plantar forces, knee angle, cycle characteristics, and electromyography of nine lower body muscles were analysed. We found that the double-push technique could be successfully transferred to cross-country skiing, and that this new technique is faster than the conventional skate skiing technique. The double-push technique was 2.9 +/- 2.2% faster (P < 0.001), which corresponds to a time advantage of 0.41 +/- 0.31 s over 100 m. The double-push technique had a longer cycle length and a lower cycle rate, and it was characterized by higher muscle activity, higher knee extension amplitudes and velocities, and higher peak foot forces, especially in the first phase of the push-off. Also, the foot was more loaded laterally in the double-push technique than in the conventional skate skiing technique.  相似文献   

5.
This study performed an analysis of the push-off forces of elite-short-track speed skaters using a new designed instrumented short-track speed skate with the aim to improve short-track skating performance. Four different skating strokes were distinguished for short-track speed skaters at speed. The strokes differed in stroke time, force level in both normal and lateral directions, and the centre of pressure (COP) on the blade. Within the homogeneous group of male elite speed skaters (N = 6), diversity of execution of the force patterns in the four phases of skating was evident, while skating at the same velocities. The male participants (N = 6) with a better personal record (PR) kept the COP more to the rear of their blades while hanging into the curve (r = 0.82, p < 0.05), leaving the curve (r = 0.86, p < 0.05), and entering the straight (r = 0.76, p < 0.10). Furthermore, the male skaters with a better PR showed a trend of a lower lateral peak force while entering the curve (r = 0.74, p < 0.10). Females showed a trend towards applying higher body weight normalised lateral forces than the males, while skating at imposed lower velocities.  相似文献   

6.
In the current project, we aim to provide speed skaters with real-time feedback on how to improve their skating performance within an individual stroke. The elite skaters and their coaches wish for a system that determines the mechanical power per stroke. The push-off force of the skater is a crucial variable in this power determination. In this study, we present the construction and calibration of a pair of wireless instrumented klapskates that can continuously and synchronously measure this push-off force in both the lateral direction and normal direction of the skate and the centre of pressure of these forces. The skate consists of a newly designed rigid bridge (0.6 kg), embedding two three-dimensional force sensors (Kistler 9602, Kistler Group, Winterthur, Switzerland), which fits between most individual skate shoes and Maple skate blades. The instrumented klapskates were calibrated on a tensile testing machine, where they proved to be unaffected to temperature conditions and accurate up to an RMS of 42 N (SEM = 1 N) in normal and up to an RMS of 27 N (SEM = 1 N) in lateral direction. Furthermore, the centre of pressure of these forces on the blade was determined up to a mean error of 10.1 mm (SD = 6.9 mm). On-ice measurements showed the possibility of recording with both skates simultaneously and synchronously, straights as well as curves. The option to send data wirelessly and real-time to other devices makes it possible to eventually provide skaters and coaches with visual real-time feedback during practice.  相似文献   

7.
Abstract

The capturing of movements by means of wearable sensors has become increasingly popular in order to obtain sport performance measures during training or competition. The purpose of the current study was to investigate the feasibility of using body worn accelerometers to identify previous highlighted performance related biomechanical changes in terms of substantial differences across skill levels and skating phases. Twenty-two ice hockey players of different caliber were equipped with two 3D accelerometers, located on the skate and the waist, as they performed 30 m forward skating sprints on an ice rink. Two measures of the temporal stride characteristics (contact time and stride time) and one measure of the propulsive power (stride propulsion) of a skating stride were calculated and checked for discriminating effects across (i) skill levels and (ii) sprint phases as well as for their (iii) strength of association with the sprint performance (total sprint time). High caliber players showed an increased stride propulsion (+22%, P?<?0.05) and shorter contact time (?5%, P?<?0.05). All three analysed variables highlighted substantial biomechanical differences between the accelerative and constant velocity phases (P?<?0.05). Stride propulsion of acceleration strides primarily correlated to total sprint time (r?=??0.57, P?<?0.05). The results demonstrate the potential of accelerometers to assess skating technique elements such as contact time or elements characterizing the propulsive power such as center of mass acceleration, to gauge skating performance. Thus, the findings of this study might contribute to establishing wearable sensors for in-field ice hockey skating performance analysis.  相似文献   

8.
陈民盛  刘彤  程湘南 《体育学刊》2006,13(1):108-110
通过对clap式冰刀与传统冰刀蹬冰机制的比较得出，clap式冰刀蹬冰技术原理体现在两个方面：一是通过提高踝关节的灵活性来改变下肢各关节的发力性质；二是通过冰刀结构的改变来揭示速滑蹬冰技术动作加速理论的适用条件。其核心是提高踝关节的灵活性。  相似文献   

9.
Abstract

The aims of the study were to: (1) adapt the “double-push” technique from inline skating to cross-country skiing; (2) compare this new skiing technique with the conventional skate skiing cross-country technique; and (3) test the hypothesis that the double-push technique improves skiing speed in a short sprint. 13 elite skiers performed maximum-speed sprints over 100 m using the double-push skate skiing technique and using the conventional “V2” skate skiing technique. Pole and plantar forces, knee angle, cycle characteristics, and electromyography of nine lower body muscles were analysed. We found that the double-push technique could be successfully transferred to cross-country skiing, and that this new technique is faster than the conventional skate skiing technique. The double-push technique was 2.9 ± 2.2% faster (P < 0.001), which corresponds to a time advantage of 0.41 ± 0.31 s over 100 m. The double-push technique had a longer cycle length and a lower cycle rate, and it was characterized by higher muscle activity, higher knee extension amplitudes and velocities, and higher peak foot forces, especially in the first phase of the push-off. Also, the foot was more loaded laterally in the double-push technique than in the conventional skate skiing technique.  相似文献   

10.
Abstract

The purpose of this study was to explore the techniques of ice skating acceleration through analysis of specific characteristics of the movement pattern during a “front start” skating task. Two Locam 16 mm cameras operating at 100 frames per second were used to record side and overhead views of the first 6.0m of the skating starts of 69 male subjects. Data were collected on three skating start criteria, three structural variables, and twelve performance variables measured over the first three strides of the start. Summary statistics were generated and Pearson product moment correlation analysis was used to assess relationships between the criteria and performance variables. In addition, stepwise multiple regression analysis was used to predict time to skate 6.0m from a combination of the structural and performance variables. Results revealed that the mean time taken to skate 6.0m was 1.95 sec; the mean instantaneous velocity at the 6.0 mark was 5.75 m/s; and the mean average acceleration over 6.0m was 2.96m/s2. Evaluation of correlation coefficients, the regression model and summary statistics resulted in several conclusions: (1) There is a statistically significant positive relationship between velocity attained and the average rate of acceleration over a 6.0m distance in a front style skating start. (2) There are statistically significant negative relationships between both mean acceleration and final instantaneous velocity, and the time taken to skate 6.0m in a front style skating start. (3) In general, the stride pattern associated with a high rate of acceleration and a minimal skating time in a front style skating start includes: a high stride rate, significant forward lean at the point of touchdown of the recovery skate, short single support periods, and placement of the recovery foot below the hip of the recovery leg at the end of the single support period.  相似文献   

11.
Abstract

In ice hockey, skating performance depends on the skill and physical conditioning of the players and on the characteristics of their equipment. CT Edge have recently designed a new skate blade that angles outward near the bottom of the blade. The objective of this study was to compare the frictional characteristics of three CT Edge blades (with blade angles of 4°, 6°, and 8°, respectively) with the frictional characteristics of a standard skate blade. The friction coefficients of the blades were determined by measuring the deceleration of an aluminium test sled equipped with three test blades. The measurements were conducted with an initial sled speed of 1.8 m · s?1 and with a load of 53 kg on each blade. The friction coefficient of the standard blades was 0.0071 (s=0.0005). For the CT Edge blades with blade angles of 4°, 6°, and 8°, friction coefficients were lower by about 13%, 21%, and 22%, respectively. Furthermore, the friction coefficients decreased with increasing load. The results of this study show that widely accepted paradigms such as “thinner blades cause less friction” need to be revisited. New blade designs might also be able to reduce friction in speed skating, figure skating, bobsledding, and luge.  相似文献   

12.
The purpose of this paper was to present and evaluate a methodology to determine the contribution of bilateral leg and pole thrusts to forward acceleration of the centre of mass (COM) of cross-country skiers from multi-dimensional ground reaction forces and motion capture data. Nine highly skilled cross-country (XC) skiers performed leg skating and V2-alternate skating (V2A) under constant environmental conditions on snow, while ground reaction forces measured from ski bindings and poles and 3D motion with high-speed cameras were captured. COM acceleration determined from 3D motion analyses served as a reference and was compared to the results of the proposed methodology. The obtained values did not differ during the leg skating push-off, and force–time curves showed high similarity, with similarity coefficients (SC) >0.90 in the push-off and gliding phases. In V2A, leg and pole thrusts were shown to contribute 35.1 and 65.9% to the acceleration of the body, respectively. COM acceleration derived from ground reaction forces alone without considering the COM position overestimated the acceleration compared to data from motion analyses, with a mean difference of 17% (P < 0.05) during leg push-off, although the shapes of force–time curves were similar (SC = 0.93). The proposed methodology was shown to be appropriate for determining the acceleration of XC skiers during leg skating push-off from multi-dimensional ground reaction forces and the COM position. It was demonstrated that both the COM position and ground reaction forces are needed to find the source of acceleration.  相似文献   

13.
本研究从周期训练的视角出发,采用访谈法对速度滑冰短距离项目运动员陆地恢复性体能训练的陆冰衔接与变化进行分析。研究首先分析了比赛期恢复性体能训练陆冰衔接的重要时间段,进而对赛前训练调整周期恢复性体能训练安排的两种模式以及赛事间的陆地恢复性体能训练的节奏进行了研究,最后确定了500m比赛两场比赛之间安排陆地恢复性训练最佳练习内容和时间。  相似文献   

14.
This study compared knee angle-specific neuromuscular adaptations after two low-volume isometric leg press complex training programmes performed at different muscle lengths. Fifteen young males were divided into two groups and trained three times per week for 6 weeks. One group (n?=?8) performed 5–7 sets of 3 s maximum isometric leg press exercise, with 4?min recovery, with knee angle at 85°?±?2° (longer muscle-tendon unit length; L-MTU). The other group (n?=?7) performed the same isometric training at a knee angle of 145°?±?2° (180°?=?full extension; shorter muscle-tendon unit length; S-MTU). During the recovery after each set of isometric exercise, participants performed two CMJ every minute, as a form of complex training. Maximum isometric force (MIF) and rate of force development (RFD) were measured over a wide range of knee angles. Countermovement jump (CMJ) performance and maximum half-squat strength (1RM) were also assessed. Training at S-MTU induced a large increase of MIF (22–58%, p?p?p?=?0.001). In contrast, training at L-MTU, resulted in a moderate and similar (≈12.3%, p?=?0.028) improvement of force at all knee angles. CMJ performance and 1RM were equally increased in both groups after training by 10.4%?±?8.3% and 7.8%?±?4.7% (p?相似文献   

15.
Abstract

The aim of this study was to investigate the effect of using poles on foot–ground interaction during trail running with slopes of varying incline. Ten runners ran on a loop track representative of a trail running field situation with uphill (+9°), level and downhill (?6°) sections at fixed speed (3.2 m.s?1). Experimental conditions included running with (WP) and without (NP) the use of poles for each of the three slopes. Several quantitative and temporal foot–ground interaction parameters were calculated from plantar pressure data measured with a portable device. Using poles induced a decrease in plantar pressure intensity even when the running velocity stayed constant. However, the localisation and the magnitude of this decrease depended on the slope situations. During WP level running, regional analysis of the foot highlighted a decrease of the force time integral (FTI) for absolute (FTIabs; ?12.6%; P<0.05) and relative values (FTIrel; ?14.3%; P<0.05) in the medial forefoot region. FTIabs (?14.2%; P<0.05) and duration of force application (Δt; ?13.5%; P<0.05) also decreased in the medial heel region when WP downhill running. These results support a facilitating effect of pole use for propulsion during level running and for the absorption phase during downhill running.  相似文献   

16.
The purpose of this study was to investigate the effect of skate blade hollow on oxygen consumption during forward skating on a treadmill. Varsity level female hockey players (n = 10, age = 21.7 years) performed skating tests at three blade hollows [0.25 in (6.35 mm), 0.50 in (12.7 mm), and 0.75 in (19.05 mm)]. The subjects skated for four minutes at three submaximal velocities (12, 14 and 16 km h−1), separated by five minutes of passive recovery. In addition, a VO2max test was performed on the day that the subjects skated at the 0.50 in hollow. The VO2max test commenced at 14 km h−1 and increased by 1 km h−1 each minute until volitional exhaustion was achieved. Four variables were measured for each skating bout, volume of gas expired (V E), volume of oxygen consumed (VO 2), heart rate (HR) and rating of perceived exertion (RPE). No significant differences (p < 0.05) were found in any of the four test variables (V E, VO2, HR, RPE) across the three skate hollows. These results show that when skating on a treadmill at submaximal velocities, skate blade hollow has no significant effect onV E, VO2, HR or RPE.  相似文献   

17.
刘锋 《冰雪运动》2014,(6):93-96
冰刀结构、冰刀研磨、运动服装等非运动员主体条件的技术创新不仅丰富了速度滑冰训练理论的完善,对速度滑冰技术的改进亦起到决定性作用。短道速滑运动员使用槽刃冰刀可以增大运动员弯道滑行时法线方向冰刀与冰面之间的斜面的支撑力,可以让运动员把身体向圆心方向倾斜的程度加大、产生更大的向心力,以更快的速度滑过弯道。在4轴联动数控磨床基础上设计一台专门加工短道速滑冰刀槽刃的自动磨刀机,技术关键是将冰刀刀片与砂轮轴布置在同一水平面上、使用单斜边砂轮,这样才可以为短道速滑冰刀磨出槽刃。短道速滑冰刀槽刃数控自动磨刀机还包括工件夹具、电源、数控装置、辅助装置等其他功能组件。  相似文献   

18.
Excessive foot pronation during gait is a risk factor in medial tibial stress syndrome (MTSS). Arch-support foot-orthoses are commonly used to manage overpronation, but it is unknown whether it is effective to manage MTSS. The present study investigated the effects of bilateral foot orthoses during running on dynamic foot-pressure distribution patterns in recreational runners with MTSS. Fifty novice (started within the last 4 months) runners diagnosed with MTSS (20.7?±?2.2 years; 71.1?±?8.6?kg; 1.78?±?0.07?m; mean?±?SD) and 50 anthropometrically-matched healthy novice runners (21.9?±?2.4 years; 71.4?±?8.8?kg; 1.73?±?0.07?m) participated in this study. The dynamic foot-pressure distribution during running with and without bilateral arch-support foot-orthoses was measured using pedobarography. MTSS novice runners have more medially directed pressures during the touchdown phase of the forefoot flat (p?=?0.009) and heel off (p?=?0.009), and a lateral pressure distribution during forefoot push-off phase (p?=?0.007) during running than healthy runners. When using the arch-support foot-orthoses the foot-pressure distribution during all phases was not significantly different from that seen in participants without MTSS. These findings indicate that during running the medial shift of foot pressures during the loading response phase and the lateral shift during the propulsion phase of foot roll-over in MTSS are effectively corrected by using arch-support foot-orthoses. The use of such arch-support orthoses may thus be an effective tool to normalize foot-pressure distribution patterns during running, indicating the potential to treat and prevent MTSS in recreational runners.  相似文献   

19.
The forward skating start is a fundamental skill for ice hockey players, yet extremely challenging given the low traction of the ice surface. The technique for maximum skating acceleration of the body is not well understood. The aim of this study was to evaluate kinematic ice hockey skating start movement technique in relation to a skater’s skill level. A 10-camera motion capture system placed on the ice surface recorded “hybrid-V” skate start movement patterns of high and low calibre male ice hockey players (n = 7, 8, respectively). Participants’ lower body kinematics and estimated body centre of mass (CoM) movement during the first four steps were calculated. Both skate groups had similar lower body strength profiles, yet high calibre skaters achieved greater velocity; skating technique differences most likely explained the performance differences between the groups. Unlike over ground sprint start technique, skating starts showed greater concurrent hip abduction, external rotation and extension, presumably for ideal blade-to-ice push-off orientation for propulsion. Initial analysis revealed similar hip, knee and ankle joint gross movement patterns across skaters, however, further scrutiny of the data revealed that high calibre skaters achieved greater vertical CoM acceleration during each step that in turn allowed greater horizontal traction, forward propulsion, lower double-support times and, accordingly, faster starts with higher stride rates.  相似文献   

20.
This study investigated the immediate effects of reducing the shoe drop (i.e. the difference between the heel and the forefoot height) on the kinematics and kinetics of the lower extremities of children tennis players performing a tennis-specific movement. Thirteen children tennis players performed a series of simulated open stance forehands wearing 3 pairs of shoes differing only in the drop: 0 (D0), 6 (D6) and the control condition of 12?mm (D12). Two embedded forceplates and a motion capture system were used to analyse the ground reaction forces and ankle and knee joint angles and moments of the leading lower limb. In D6 compared with D12, the peak impact force was reduced by 24% (p?=?.004) and the ankle was less dorsiflexed at foot strike (p?=?.037). In D0 compared with D12, the peak impact force was reduced by 17% (p?=?.049), the ankle was less dorsiflexed at foot strike (p?=?.045) and the knee was more flexed at foot strike (p?=?.007). In addition, 4 out of 13 participants (31%) presented a forefoot strike pattern for some of the trials in D0. No difference was observed across shoe conditions for the peak knee extensor moment (p?=?.658) or the peak ankle plantarflexor moment (p?=?.071). The results provide preliminary data supporting the hypothesis that for children tennis players, using a 6-mm lower shoe drop might reduce heel impact forces and thus limit potentially impact-related injuries.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号