共查询到20条相似文献，搜索用时 31 毫秒
1.
Despite its importance to structural equation modeling, model evaluation remains underdeveloped in the Bayesian SEM framework. Posterior predictive p-values (PPP) and deviance information criteria (DIC) are now available in popular software for Bayesian model evaluation, but they remain underutilized. This is largely due to the lack of recommendations for their use. To address this problem, PPP and DIC were evaluated in a series of Monte Carlo simulation studies. The results show that both PPP and DIC are influenced by severity of model misspecification, sample size, model size, and choice of prior. The cutoffs PPP < 0.10 and ?DIC > 7 work best in the conditions and models tested here to maintain low false detection rates and misspecified model selection rates, respectively. The recommendations provided in this study will help researchers evaluate their models in a Bayesian SEM analysis and set the stage for future development and evaluation of Bayesian SEM fit indices. 相似文献
2.
Meta-analytic structural equation modeling (MASEM) refers to a set of meta-analysis techniques for combining and comparing structural equation modeling (SEM) results from multiple studies. Existing approaches to MASEM cannot appropriately model between-studies heterogeneity in structural parameters because of missing correlations, lack model fit assessment, and suffer from several theoretical limitations. In this study, we address the major shortcomings of existing approaches by proposing a novel Bayesian multilevel SEM approach. Simulation results showed that the proposed approach performed satisfactorily in terms of parameter estimation and model fit evaluation when the number of studies and the within-study sample size were sufficiently large and when correlations were missing completely at random. An empirical example about the structure of personality based on a subset of data was provided. Results favored the third factor structure over the hierarchical structure. We end the article with discussions and future directions. 相似文献
3.
Research in regularization, as applied to structural equation modeling (SEM), remains in its infancy. Specifically, very little work has compared regularization approaches across both frequentist and Bayesian estimation. The purpose of this study was to address just that, demonstrating both similarity and distinction across estimation frameworks, while specifically highlighting more recent developments in Bayesian regularization. This is accomplished through the use of two empirical examples that demonstrate both ridge and lasso approaches across both frequentist and Bayesian estimation, along with detail regarding software implementation. We conclude with a discussion of future research, advocating for increased evaluation and synthesis across both Bayesian and frequentist frameworks. 相似文献
4.
From the time of William James, psychologists have posited individually importance-weighted-average models (IWAMs) in which weighting specific attributes by individual measures of importance improves prediction of the global outcome measures. Because IWAMs cause much confusion, we briefly review a general taxonomic paradigm and structural equation models for testing IWAMs, and demonstrate its application for 2 simulated and 3 diverse “real” data applications (multidimensional measures of self-concept, quality of life, and job satisfaction). Consistent across the real data applications and previous research more generally, there is surprisingly little support for IWAMs when tested appropriately. In these diverse tests of IWAMs we integrate new approaches such as exploratory structural equation modeling (SEM), alternative approaches to constructing latent interactions, application of bifactor models, modeling method and item-wording effects, and the juxtaposition of model evaluation in relation to goodness of fit (typically used in SEM studies) and variance explained (typically used in multiple regression tests of IWAMs). 相似文献
5.
Recently, advancements in Bayesian structural equation modeling (SEM), particularly software developments, have allowed researchers to more easily employ it in data analysis. With the potential for greater use, come opportunities to apply Bayesian SEM in a wider array of situations, including for small sample size problems. Effective use of Bayseian estimation hinges on selection of appropriate prior distributions for model parameters. Researchers have suggested that informative priors may be useful with small samples, presuming that the mean of the prior is accurate with respect to the population mean. The purpose of this simulation study was to examine model parameter estimation for the Multiple Indicator Multiple Cause model when an informative prior distribution had an incorrect mean. Results demonstrated that the use of incorrect informative priors with somewhat larger variance than is typical, yields more accurate parameter estimates than do naïve priors, or maximum likelihood estimation. Implications for practice are discussed. 相似文献
6.
Mike W.-L. Cheung 《Structural equation modeling》2013,20(3):429-454
Multivariate meta-analysis has become increasingly popular in the educational, social, and medical sciences. It is because the outcome measures in a meta-analysis can involve more than one effect size. This article proposes 2 mathematically equivalent models to implement multivariate meta-analysis in structural equation modeling (SEM). Specifically, this article shows how multivariate fixed-, random- and mixed-effects meta-analyses can be formulated as structural equation models. metaSEM (a free R package based on OpenMx) and Mplus are used to implement the proposed procedures. A real data set is used to illustrate the procedures. Formulating multivariate meta-analysis as structural equation models provides many new research opportunities for methodological development in both meta-analysis and SEM. Issues related to and extensions on the SEM-based meta-analysis are discussed. 相似文献
7.
This article examines Bayesian model averaging as a means of addressing predictive performance in Bayesian structural equation models. The current approach to addressing the problem of model uncertainty lies in the method of Bayesian model averaging. We expand the work of Madigan and his colleagues by considering a structural equation model as a special case of a directed acyclic graph. We then provide an algorithm that searches the model space for submodels and obtains a weighted average of the submodels using posterior model probabilities as weights. Our simulation study provides a frequentist evaluation of our Bayesian model averaging approach and indicates that when the true model is known, Bayesian model averaging does not yield necessarily better predictive performance compared to nonaveraged models. However, our case study using data from an international large-scale assessment reveals that the model-averaged submodels provide better posterior predictive performance compared to the initially specified model. 相似文献
8.
Stochastic differential equation (SDE) models are a promising method for modeling intraindividual change and variability. Applications of SDEs in the social sciences are relatively limited, as these models present conceptual and programming challenges. This article presents a novel method for conceptualizing SDEs. This method uses structural equation modeling (SEM) conventions to simplify SDE specification, the flexibility of SEM to expand the range of SDEs that can be fit, and SEM diagram conventions to facilitate the teaching of SDE concepts. This method is a variation of latent difference scores (McArdle, 2009; McArdle & Hamagami, 2001) and the oversampling approach (Singer, 2012), and approximates the advantages of analytic methods such as the exact discrete model (Oud & Jansen, 2000) while retaining the modeling fiexibility of methods such as latent differential equation modeling (Boker, Neale, & Rausch, 2004). A simulation and empirical example are presented to illustrate that this method can be implemented on current computing hardware, produces good approximations of analytic solutions, and can flexibly accommodate novel models. 相似文献
9.
Posterior predictive model checking (PPMC) is a Bayesian model checking method that compares the observed data to (plausible) future observations from the posterior predictive distribution. We propose an alternative to PPMC in the context of structural equation modeling, which we term the poor person’s PPMC (PP-PPMC), for the situation wherein one cannot afford (or is unwilling) to draw samples from the full posterior. Using only by-products of likelihood-based estimation (maximum likelihood estimate and information matrix), the PP-PPMC offers a natural method to handle parameter uncertainty in model fit assessment. In particular, a coupling relationship between the classical p values from the model fit chi-square test and the predictive p values from the PP-PPMC method is carefully examined, suggesting that PP-PPMC might offer an alternative, principled approach for model fit assessment. We also illustrate the flexibility of the PP-PPMC approach by applying it to case-influence diagnostics. 相似文献
10.
11.
In applied research, such as with motivation theories, typically many variables are theoretically implied predictors of an outcome and several interactions are assumed (e.g., Watt, 2004). However, estimation problems that might arise when several interaction and/or quadratic effects are analyzed simultaneously have not been investigated because simulation studies on interaction effects in the structural equation modeling framework have mainly focused on small models that contain single interaction effects. In this article, we show that traditional approaches can provide estimates with low accuracy when complex models are estimated. We introduce an adaptive Bayesian lasso approach with spike-and-slab priors that overcomes this problem. Using a complex model in a simulation study, we show that the parameter estimates of the proposed approach are more accurate in situations with high multicollinearity or low reliability compared with a standard Bayesian lasso approach and typical frequentist approaches (i.e., unconstrained product indicator approach and latent moderated structures approach). 相似文献
12.
Mike W.-L. Cheung 《Structural equation modeling》2013,20(1):157-167
Structural equation modeling (SEM) is now a generic modeling framework for many multivariate techniques applied in the social and behavioral sciences. Many statistical models can be considered either as special cases of SEM or as part of the latent variable modeling framework. One popular extension is the use of SEM to conduct linear mixed-effects modeling (LMM) such as cross-sectional multilevel modeling and latent growth modeling. It is well known that LMM can be formulated as structural equation models. However, one main difference between the implementations in SEM and LMM is that maximum likelihood (ML) estimation is usually used in SEM, whereas restricted (or residual) maximum likelihood (REML) estimation is the default method in most LMM packages. This article shows how REML estimation can be implemented in SEM. Two empirical examples on latent growth model and meta-analysis are used to illustrate the procedures implemented in OpenMx. Issues related to implementing REML in SEM are discussed. 相似文献
13.
Dynamic structural equation modeling (DSEM) is a novel, intensive longitudinal data (ILD) analysis framework. DSEM models intraindividual changes over time on Level 1 and allows the parameters of these processes to vary across individuals on Level 2 using random effects. DSEM merges time series, structural equation, multilevel, and time-varying effects models. Despite the well-known properties of these analysis areas by themselves, it is unclear how their sample size requirements and recommendations transfer to the DSEM framework. This article presents the results of a simulation study that examines the estimation quality of univariate 2-level autoregressive models of order 1, AR(1), using Bayesian analysis in Mplus Version 8. Three features are varied in the simulations: complexity of the model, number of subjects, and number of time points per subject. Samples with many subjects and few time points are shown to perform substantially better than samples with few subjects and many time points. 相似文献
14.
Effects of sample size,estimation methods,and model specification on structural equation modeling fit indexes 总被引：2，自引：0，他引：2
A Monte Carlo simulation study was conducted to investigate the effects on structural equation modeling (SEM) fit indexes of sample size, estimation method, and model specification. Based on a balanced experimental design, samples were generated from a prespecified population covariance matrix and fitted to structural equation models with different degrees of model misspecification. Ten SEM fit indexes were studied. Two primary conclusions were suggested: (a) some fit indexes appear to be noncomparable in terms of the information they provide about model fit for misspecified models and (b) estimation method strongly influenced almost all the fit indexes examined, especially for misspecified models. These 2 issues do not seem to have drawn enough attention from SEM practitioners. Future research should study not only different models vis‐à‐vis model complexity, but a wider range of model specification conditions, including correctly specified models and models specified incorrectly to varying degrees. 相似文献
15.
《Structural equation modeling》2013,20(4):544-565
Both structural equation modeling (SEM) and item response theory (IRT) can be used for factor analysis of dichotomous item responses. In this case, the measurement models of both approaches are formally equivalent. They were refined within and across different disciplines, and make complementary contributions to central measurement problems encountered in almost all empirical social science research fields. In this article (a) fundamental formal similiarities between IRT and SEM models are pointed out. It will be demonstrated how both types of models can be used in combination to analyze (b) the dimensional structure and (c) the measurement invariance of survey item responses. All analyses are conducted with Mplus, which allows an integrated application of both approaches in a unified, general latent variable modeling framework. The aim is to promote a diffusion of useful measurement techniques and skills from different disciplines into empirical social research. 相似文献
16.
To infer longitudinal relationships among latent factors, traditional analyses assume that the measurement model is invariant across measurement occasions. Alternative to placing cross-occasion equality constraints on parameters, approximate measurement invariance (MI) can be analyzed by specifying informative priors on parameter differences between occasions. This study evaluated the estimation of structural coefficients in multiple-indicator autoregressive cross-lagged models under various conditions of approximate MI using Bayesian structural equation modeling. Design factors included factor structures, conditions of non-invariance, sizes of structural coefficients, and sample sizes. Models were analyzed using two sets of small-variance priors on select model parameters. Results showed that autoregressive coefficient estimates were more accurate for the mixed pattern than the decreasing pattern of non-invariance. When a model included cross-loadings, an interaction was found between the cross-lagged estimates and the non-invariance conditions. Implications of findings and future research directions are discussed. 相似文献
17.
Exploratory structural equation modeling (ESEM) is an approach for analysis of latent variables using exploratory factor analysis to evaluate the measurement model. This study compared ESEM with two dominant approaches for multiple regression with latent variables, structural equation modeling (SEM) and manifest regression analysis (MRA). Main findings included: (1) ESEM in general provided the least biased estimation of the regression coefficients; SEM was more biased than MRA given large cross-factor loadings. (2) MRA produced the most precise estimation, followed by ESEM and then SEM. (3) SEM was the least powerful in the significance tests; statistical power was lower for ESEM than MRA with relatively small target-factor loadings, but higher for ESEM than MRA with relatively large target-factor loadings. (4) ESEM showed difficulties in convergence and occasionally created an inflated type I error rate under some conditions. ESEM is recommended when non-ignorable cross-factor loadings exist. 相似文献
18.
Larry R. Price Daniel P. Gonzalez Tiffany A. Whittaker 《Structural equation modeling》2019,26(1):12-23
A problem central to structural equation modeling is measurement model specification error and its propagation into the structural part of nonrecursive latent variable models. Full-information estimation techniques such as maximum likelihood are consistent when the model is correctly specified and the sample size large enough; however, any misspecification within the model can affect parameter estimates in other parts of the model. The goals of this study included comparing the bias, efficiency, and accuracy of hypothesis tests in nonrecursive latent variable models with indirect and direct feedback loops. We compare the performance of maximum likelihood, two-stage least-squares and Bayesian estimators in nonrecursive latent variable models with indirect and direct feedback loops under various degrees of misspecification in small to moderate sample size conditions. 相似文献
19.
Christian Geiser Michael Eid Stephen G. West Tanja Lischetzke Fridtjof W. Nussbeck 《Structural equation modeling》2013,20(3):409-436
It is well known that measurement error in observable variables induces bias in estimates in standard regression analysis and that structural equation models are a typical solution to this problem. Often, multiple indicator equations are subsumed as part of the structural equation model, allowing for consistent estimation of the relevant regression parameters. In many instances, however, embedding the measurement model into structural equation models is not possible because the model would not be identified. To correct for measurement error one has no other recourse than to provide the exact values of the variances of the measurement error terms of the model, although in practice such variances cannot be ascertained exactly, but only estimated from an independent study. The usual approach so far has been to treat the estimated values of error variances as if they were known exact population values in the subsequent structural equation modeling (SEM) analysis. In this article we show that fixing measurement error variance estimates as if they were true values can make the reported standard errors of the structural parameters of the model smaller than they should be. Inferences about the parameters of interest will be incorrect if the estimated nature of the variances is not taken into account. For general SEM, we derive an explicit expression that provides the terms to be added to the standard errors provided by the standard SEM software that treats the estimated variances as exact population values. Interestingly, we find there is a differential impact of the corrections to be added to the standard errors depending on which parameter of the model is estimated. The theoretical results are illustrated with simulations and also with empirical data on a typical SEM model. 相似文献
20.
Multilevel Structural equation models are most often estimated from a frequentist framework via maximum likelihood. However, as shown in this article, frequentist results are not always accurate. Alternatively, one can apply a Bayesian approach using Markov chain Monte Carlo estimation methods. This simulation study compared estimation quality using Bayesian and frequentist approaches in the context of a multilevel latent covariate model. Continuous and dichotomous variables were examined because it is not yet known how different types of outcomes—most notably categorical—affect parameter recovery in this modeling context. Within the Bayesian estimation framework, the impact of diffuse, weakly informative, and informative prior distributions were compared. Findings indicated that Bayesian estimation may be used to overcome convergence problems and improve parameter estimate bias. Results highlight the differences in estimation quality between dichotomous and continuous variable models and the importance of prior distribution choice for cluster-level random effects. 相似文献