首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
学生的学习疲劳及其防治   总被引:2,自引:0,他引:2  
学生的学习疲劳是他们取得学习成就的大敌,本文着重从生理和心理两个方面论述了学习疲劳的成因、表现及危害,并相应地提出了防治生理疲劳和心理疲劳的措施。  相似文献   

2.
学生的学习疲劳是他们取得学业成就的大敌 ,本文着重从生理和心理两个方面论述了学习疲劳的成因、表现及危害 ,并相应地提出了防治生理疲劳和心理疲劳的措施。  相似文献   

3.
疲劳是一种正常生理现象,运动到一定阶段必然出现的一种生理功能变化现象,如果运动性疲劳没有得到及时的恢复而使疲劳累积导致疲劳过度,或者当发生运动性疲劳时没有及时地进行调整,继续保持原有的运动,使疲劳程度加深,导致力竭,这都会使运动性疲劳变成一种病理现象,从而对健康造成不良影响。所以根据疲劳的产生机理,原因分析疲劳并采用一定的客观判断方法测试疲劳,进而运用一些消除运动性疲劳的方法,使机体快速有效地进行超量恢复。以便再更好的投入训练、工作和学习,进行更高水平的恢复,提高人体功能能力达到更高水平的运动能力贮备,是非常有必要的。  相似文献   

4.
本文对运动性疲劳进行了简单分析,阐述了运动性疲劳的产生机理、表现、以及判断方法,并根据运动性疲劳产生的原理对运动性疲劳的消除进行了详细地论述。  相似文献   

5.
针对机采油井油管经常发生疲劳断裂的问题,加工了J55油管疲劳试件,通过成组多级疲劳试验法,获得了J55油管高周疲劳分组试验数据。通过疲劳寿命的参数估计和疲劳寿命的分布类型检验,获得了J55油管在不同轴向应力水平下的疲劳寿命、分布规律和P-S-N曲线。结果显示,J55油管的疲劳寿命服从对数状态分布,其S-N曲线服从一般金属的疲劳S-N曲线形式。在疲劳寿命一定时,欲获得较高的可靠性,需大幅度降低油管的疲劳应力。  相似文献   

6.
运动性疲劳研究进展的综述   总被引:11,自引:0,他引:11  
通过光盘检索查阅国内外大量的文献研究资料,对运动性疲劳从其定义、表现特点、机制等方面的研究进展以及抗运动性疲劳的研究进展作了较为全面的综述,并对21世纪运动性疲劳的研究方向和研究前景作了初步的展望。  相似文献   

7.
本文拟就简易客观指标、自我感觉以及运动者的经验等方面对运动性疲劳进行简易测定并提出消除运动性疲劳的方法,以期为运动性疲劳的研究提供有益的参考。  相似文献   

8.
疲劳是一种正常生理现象,是运动到一定阶段必然出现的一种生理功能变化现象,如果运动性疲劳没有得到及时恢复而使疲劳累积导致疲劳过度,或者当发生运动性疲劳时没有及时进行调整,继续保持原有的运动,使疲劳程度加深,导致力竭,就会使运动性疲劳变成一种病理观象,从而对健康造成不良影响。  相似文献   

9.
刘杰 《天中学刊》1999,14(2):80-81
负荷的直接结果是引起疲劳.当机体对负荷刺激不再产生疲劳时,才表明机体对此负荷刺激产生了训练适应.当机体出现疲劳后,机体竞技能力就会明显下降,只有尽快消除疲劳,使机体能力恢复到正常水平,才能进一步承受新的更大负荷.对人体承受负荷后产生疲劳及消除疲劳、恢复机体能力的基本规律进行了解,有利于更科学地安排训练,提高成绩.1恢复的内容(1)能量的消耗与恢复.人体的运动离不开能量.运动的全过程是一个不断消耗能量又不断补充和恢复能量的过程,其中包括磷酸盐(ATP-CP)、糖元、蛋白质和脂肪等能量物质的消耗与恢复.…  相似文献   

10.
为了研究下弦盖板与桥面不等厚对接交叉焊缝构造的疲劳性能,进行了疲劳试件理论计算和静载试验分析。采用有限元软件ANSYS建立数值仿真模型,并对试件在荷载和约束情况下进行了应力集中分析;考虑螺栓预紧力的影响,确定试件的破坏点、最大应力、名义应力和应力集中系数。结果表明:该构件经过疲劳试验后,有限元分析值与实际试件疲劳试验结果有较好的一致性;该构件的疲劳性能满足工程要求。  相似文献   

11.
为了研究粉煤灰碎石材料的疲劳性能.分别对石灰粉煤灰碎石、水泥粉煤灰碎石、水泥稳定碎石材料进行疲劳试验.结果表明,石灰粉煤灰碎石的抗疲劳性能最好,其次是水泥粉煤灰,水泥稳定碎石抗疲劳性能较差.在施工中,建议在满足强度的情况下,尽量使用石灰粉煤灰碎石.  相似文献   

12.
INTRODUCTION Offshore production and drilling platforms are, in general, large and complex structural systems, usually fabricated using steel tubular members interconnected through welded joints. These structures are predomi- nantly subjected to oscillatory environmental loads and fatigue characterizes a primary mode of failure of their components. The fatigue damage at any point in the structure depends on the complete stress history during the structure’s service life. The calculation …  相似文献   

13.
机动车驾驶员疲劳检测系统的研究现状及发展趋势   总被引:4,自引:0,他引:4  
文章首先介绍了国内外对机动车驾驶员疲劳检测系统的研究现状,阐述了驾驶员疲劳检测的关键技术在于驾驶员疲劳机理和数学模型、驾驶员疲劳检测方法和评价体系、驾驶员疲劳检测系统的商品化等,最后总结了驾驶员疲劳检测系统良好的应用前景和展望了其研究发展趋势。  相似文献   

14.
目的:探讨疲劳因素对特困生心身健康的影响,以建立特困生心身健康与疲劳因素关系的数学模型。方法:随机抽取108名非特困生和212名特困生,采用康奈尔医学指数(CMI)测验特困生的心身症状,采取疲劳评定量表(FAI)测验特困生的疲劳因子,用SPSS12.0录入和统计所有数据。结果:特困生心理健康总分、心身健康总分、疲劳总分、疲劳严重程度、疲劳所致心身后果高于非特困生,差异有统计学意义(P<0.05)。结论:特困生比非特困生疲劳程度严重,易出现心身障碍。疲劳因子对男女特困生的心身健康的影响不同。  相似文献   

15.
N2 and N3 are known as the transition points of the three principal stages of fatigue: initial accommodation, accretion of damage and terminal fatigue. Many experiments show that the ratios of N2/Nf and N3/Nf tend to be stable even though the specific N2 and N3 values may fluctuate widely. The primary goal of this research is to study the piezomagnetic field surrounding AISI 1018 steel specimen under repeated loads and to find the ratio values of N2/Nf and N3/Nf by analyzing 11 sets of low-cycle fatigue data. An MTS-810 testing system with a peak capacity of 222 kN was used to obtain the data which consisted of stress, strain, and piezomagnetic field. A computer program was constructed to track the evolution of the piezomagnetic field and regression analysis was carried out to determine N2 and N3 values. It was observed that there exists a consistent relationship between N2 and Nf. The apparent invariance of the ratio N2/Nf implies that N2 may be identified as an index of performance in the early loading response of a specimen that forecasts its fatigue life, Nf. It has been demonstrated that measurements of the magnetic and mechanical hysteresis can yield significant insights into the various stages of the development of a fatigue critical microstructure which culminates in complete rupture of the material.  相似文献   

16.
A significant temperature raise within hydrogen vehicle cylinder during the fast filling process will be observed, while the strength and fatigue life of the cylinder will dramatically decrease at high temperature. In order to evaluate the strength and fatigue of composite hydrogen storage vessel, a 70-MPa fatigue test system using hydrogen medium was set up. Experimental study on the fatigue of composite hydrogen storage vessels under real hydrogen environment was performed. The experimental results show that the ultimate strength and fatigue life both decreased obviously compared with the values under hydraulic fatigue test. Furthermore, fatigue property, failure behavior, and safe hydrogen charging/discharging working mode of onboard hydrogen storage vessels were obtained through the fatigue tests.  相似文献   

17.
INTRODUCTION A number of experimental fatigue studies were conducted on plain concrete as well as on steel fibre reinforced concrete (SFRC) beams of different sizes under different loading conditions. Murdock and Kesler (1958) investigated the effect of stress ratio on the fatigue strength of plain concrete. Batson et al.(1972) reported fatigue strength of 74% and 83% of the first crack static flexural strength at 2 million cycles of complete reversed and not-reversed loads respectively…  相似文献   

18.
远红外瓷珠热敷对一次性力竭运动疲劳消除的实验研究   总被引:1,自引:0,他引:1  
通过观察远红外瓷珠热敷对一次性力竭运动后血乳酸的变化,探讨其对运动性疲劳消除的作用以及促进机体恢复的可行性.通过对20名运动员一次性力竭运动后血乳酸的测试结果表明:远红外瓷珠热敷能使一次性力竭运动后血乳酸明显下降,有利于消除疲劳,改善运动员的机能状态,提高运动能力.  相似文献   

19.
本试验研究旨在通过CFF测量和主观评价来探讨视频显示装置(VDT)的大小对视疲劳的影响。客观手段为测量不同试验条件下受试者在实验前后的CFF差值,主观手段为Borg疲劳量表、不适部位评价和主观偏好评价,并辅以行为观察。试验结果表明:VDT尺寸大小对视疲劳具有一定的影响;男女对不同视频大小条件的适应情况存在性别差异;尺寸大小对VDT作业的坐姿行为具有一定的影响。  相似文献   

20.
INTRODUCTION Due to market pressures for improvements in productivity, reliability, ductility, wear resistance and profitability of mechanical systems, manufacturers are placing increasing demands on available materials.Economic constraints require that these materials are inexpensive and easily available. In order to enhance the surface properties of today’s materials, producers of components are turning to different surface finish and treatments. There are several techniques available …  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号