首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 644 毫秒
1.
A new model of running shoes which features an extreme cushioning and an oversized midsole, known as the maximalist (MAX) was launched. This design claims to provide excellent shock absorption, particularly during downhill running. This study sought to assess the effects of MAX on the external impact loading, footstrike pattern, and stride length during level ground and downhill running on an instrumented treadmill. Twenty-seven distance runners completed four 5-minute running trials in the two footwear conditions (MAX and traditional running shoes (TRS)) on a level surface (0%) and downhill (10%-declination). Average and instantaneous loading rates (ILRs), footstrike pattern and stride length were measured during the last minute of each running trial. A 12% greater ILR was observed in downhill running with MAX (p?=?.045; Cohen’s d?=?0.44) as compared to TRS. No significant difference was found in the loading rates (p?>?.589) and stride length (p?=?.924) when running on a level surface. Majority of runners maintained the same footstrike pattern in both footwear conditions. Findings of this study suggested that MAX might not reduce the external impact loading in runners during level and downhill treadmill running. Instead, this type of footwear may conceivably increase the external impact loading during downhill treadmill running.  相似文献   

2.
BackgroundCompared to conventional racing shoes, Nike Vaporfly 4% running shoes reduce the metabolic cost of level treadmill running by 4%. The reduction is attributed to their lightweight, highly compliant, and resilient midsole foam and a midsole-embedded curved carbon-fiber plate. We investigated whether these shoes also could reduce the metabolic cost of moderate uphill (+3°) and downhill (–3°) grades. We tested the null hypothesis that, compared to conventional racing shoes, highly cushioned shoes with carbon-fiber plates would impart the same ～4% metabolic power (W/kg) savings during uphill and downhill running as they do during level running.MethodsAfter familiarization, 16 competitive male runners performed six 5-min trials (2 shoes × 3 grades) in 2 Nike marathon racing-shoe models (Streak 6 and Vaporfly 4%) on a level, uphill (+3°), and downhill (–3°) treadmill at 13 km/h (3.61 m/s). We measured submaximal oxygen uptake and carbon dioxide production during Minutes 4–5 and calculated metabolic power (W/kg) for each shoe model and grade combination.ResultsCompared to the conventional shoes (Streak 6), the metabolic power in the Vaporfly 4% shoes was 3.83% (level), 2.82% (uphill), and 2.70% (downhill) less (all p < 0.001). The percent of change in metabolic power for uphill running was less compared to level running (p = 0.04; effect size (ES) = 0.561) but was not statistically different between downhill and level running (p = 0.17; ES = 0.356).ConclusionOn a running course with uphill and downhill sections, the metabolic savings and hence performance enhancement provided by Vaporfly 4% shoes would likely be slightly less overall, compared to the savings on a perfectly level race course.  相似文献   

3.
Shoe manufacturers launch running shoes with increased (e.g., maximalists) or decreased (e.g., minimalists) midsole thickness and claim that they may prevent running injury. Previous studies tested footwear models with different midsole thicknesses on the market but the shoe construct was not strictly comparable. Therefore, in the present study, we examined the effect of midsole thickness, from 1-mm to 29-mm, in a standard test shoe prototype on the vertical loading rates, footstrike angle and temporal spatial parameters in distance runners. Fifteen male habitual rearfoot strikers were recruited from local running clubs. They were asked to run on an instrumented treadmill in shoes with different midsole thicknesses. We found significant interactions between midsole thickness with vertical loading rates (p < 0.001), footstrike angle (p = 0.013), contact time (p < 0.001), cadence (p = 0.003), and stride length (p = 0.004). Specifically, shoes with thinner midsole (1- and 5-mm) significantly increased the vertical loading rates and shortened the contact time, when compared with thicker midsole shoes (25- and 29-mm). However, we did not observe any substantial differences in the footstrike angle, cadence and stride length between other shod conditions. The present study provides biomechanical data regarding the relationship between full spectrum midsole thicknesses and running biomechanics in a group of rearfoot strikers.  相似文献   

4.
Abstract

Ethylene vinyl acetate and polyurethane are widely used materials for shoe midsoles. The present study investigated the durability of running shoes made from ethylene vinyl acetate and one type of polyurethane (polyurethane-1), which have similar hardness and density, and another type of polyurethane (polyurethane-2), which has high hardness/density. All shoes differed from one another only in terms of the midsole material used. Eight male runners participated in the present study and used the shoes to run 500 km (10 × 50 km). The cushioning and energy return characteristics of each shoe were measured using an impact tester before and after each 50-km run. The results showed that as the running distance increased, the peak force of midsole materials changed with different patterns. Ethylene vinyl acetate and polyurethane-1 showed greater cushioning than polyurethane-2 over 500 km (ethylene vinyl acetate, 918.2–968.0 N; polyurethane-1, 909.6–972.9 N; polyurethane-2, 983.0–1105.6 N). Polyurethane-1 showed greater cushioning from 200 km to 300 km compared with 0 km (0 km, 972.9 ± 66.3 N; 200 km, 909.6 ± 61.2 N; 250 km, 921.9 ± 51.2 N; 300 km, 924.6 ± 51.9 N). The cushioning of ethylene vinyl acetate shoes was diminished after 500 km compared with that at 0 km (968.0 ± 25.9 N vs. 921.1 ± 20.1 N). Ethylene vinyl acetate resulted in greater energy returns than polyurethane. Both foam category and hardness/density affected the critical biomechanical properties of running shoes.  相似文献   

5.
Running downhill, in comparison to running on the flat, appears to involve an exaggerated stretch-shortening cycle (SSC) due to greater impact loads and higher vertical velocity on landing, whilst also incurring a lower metabolic cost. Therefore, downhill running could facilitate higher volumes of training at higher speeds whilst performing an exaggerated SSC, potentially inducing favourable adaptations in running mechanics and running economy (RE). This investigation assessed the efficacy of a supplementary 8-week programme of downhill running as a means of enhancing RE in well-trained distance runners. Nineteen athletes completed supplementary downhill (?5% gradient; n?=?10) or flat (n?=?9) run training twice a week for 8 weeks within their habitual training. Participants trained at a standardised intensity based on the velocity of lactate turnpoint (vLTP), with training volume increased incrementally between weeks. Changes in energy cost of running (EC) and vLTP were assessed on both flat and downhill gradients, in addition to maximal oxygen uptake (?O2max). No changes in EC were observed during flat running following downhill (1.22?±?0.09 vs 1.20?±?0.07?Kcal?kg?1?km?1, P?=?.41) or flat run training (1.21?±?0.13 vs 1.19?±?0.12?Kcal?kg?1?km?1). Moreover, no changes in EC during downhill running were observed in either condition (P?>?.23). vLTP increased following both downhill (16.5?±?0.7 vs 16.9?±?0.6?km?h?1 , P?=?.05) and flat run training (16.9?±?0.7 vs 17.2?±?1.0?km?h?1, P?=?.05), though no differences in responses were observed between groups (P?=?.53). Therefore, a short programme of supplementary downhill run training does not appear to enhance RE in already well-trained individuals.  相似文献   

6.
Abstract

This study investigates the effect of running shoes’ aging on mechanical and biomechanical parameters as a function of midsole materials (viscous, intermediate, elastic) and ground inclination. To this aim, heel area of the shoe (under calcaneal tuberosity) was first mechanically aged at realistic frequency and impact magnitudes based on a 660 km training plan. Stiffness (ST) and viscosity were then measured on both aged and matching new shoes, and repercussions on biomechanical variables (joint kinematics, muscular pre-activation, vertical ground reaction force and tibial acceleration) were assessed during a leg-extended stepping-down task designed to mimic the characteristics of running impacts. Shoes’ aging led to increased ST (means: from 127 to 154 N ? mm?1) and decreased energy dissipation (viscosity) (means: from 2.19 to 1.88 J). The effects induced by mechanical changes on body kinematics were very small. However, they led with the elastic shoe to increased vastus lateralis pre-activation, tibial acceleration peak (means: from 4.5 g to 5.2 g) and rate. Among the three shoes tested, the shoe with intermediate midsole foam provided the best compromise between viscosity and elasticity. The optimum balance remains to be found for the design of shoes regarding at once cushioning, durability and injury prevention.  相似文献   

7.
This study investigated whether male runners improve running performance, running economy, ankle plantar flexor strength, and alter running biomechanics and lower limb bone mineral density when gradually transitioning to using minimalist shoes for 100% of weekly running. The study was a planned follow-up of runners (n?=?50) who transitioned to minimalist or conventional shoes for 35% of weekly structured training in a previous 6-week randomised controlled trial. In that trial, running performance and economy improved more with minimalist shoes than conventional shoes. Runners in each group were instructed to continue running in their allocated shoe during their own preferred training programme for a further 20 weeks while increasing allocated shoe use to 100% of weekly training. At the 20-week follow-up, minimalist shoes did not affect performance (effect size: 0.19; p?=?0.218), running economy (effect size: ≤?0.24; p?≥?0.388), stride rate or length (effect size: ≤?0.12; p?≥?0.550), foot strike (effect size: ≤?0.25; p?≥?0.366), or bone mineral density (effect size: ≤?0.40; p?≥?0.319). Minimalist shoes increased plantar flexor strength more than conventional shoes when runners trained with greater mean weekly training distances (shoe*distance interaction: p?=?0.036). After greater improvements with minimalist shoes during the initial six weeks of a structured training programme, increasing minimalist shoe use from 35% to 100% over 20 weeks, when runners use their own preferred training programme, did not further improve performance, running economy or alter running biomechanics and lower limb bone mineral density. Minimalist shoes improved plantar flexor strength more than conventional shoes in runners with greater weekly training distances.  相似文献   

8.
In this study, we examined the time course of changes in running economy following a 30-min downhill (-15%) run at 70% peak aerobic power (VO2peak). Ten young men performed level running at 65, 75, and 85% VO2peak (5 min for each intensity) before, immediately after, and 1 - 5 days after the downhill run, at which times oxygen consumption (VO2), minute ventilation, the respiratory exchange ratio (RER), heart rate, ratings of perceived exertion (RPE), and blood lactate concentration were measured. Stride length, stride frequency, and range of motion of the ankle, knee, and hip joints during the level runs were analysed using high-speed (120-Hz) video images. Downhill running induced reductions (7 - 21%, P < 0.05) in maximal isometric strength of the knee extensors, three- to six-fold increases in plasma creatine kinase activity and myoglobin concentration, and muscle soreness for 4 days after the downhill run. Oxygen consumption increased (4 - 7%, P < 0.05) immediately to 3 days after downhill running. There were also increases (P < 0.05) in heart rate, minute ventilation, RER, RPE, blood lactate concentration, and stride frequency, as well as reductions in stride length and range of motion of the ankle and knee. The results suggest that changes in running form and compromised muscle function due to muscle damage contribute to the reduction in running economy for 3 days after downhill running.  相似文献   

9.
PurposeTo observe the relative change in foot-strike pattern, pressure characteristics, surface electromyography (sEMG) recordings, and stride characteristics in forefoot strike runners wearing both minimalist and traditional shoes during a 50-km run.MethodsFour experienced minimalist runners were enrolled in this study. Each runner ran a 50-km simulated run in both minimalist shoes and traditional shoes. Pressure data, sEMG recordings, and limited 3D motion capture data were collected during the initial 0.8 km and final 0.8 km for each trial.ResultsThree runners in the traditional shoe type condition and one runner in the minimalist shoe type condition demonstrated a more posterior initial contact area (midfoot strike (MFS) pattern) after the 50-km run, which was supported by increased activity of the tibialis anterior in the pre-contact phase (as per root mean square (RMS) values). In addition, in both pre- and post-run conditions, there were increased peak pressures in the minimalist shoe type, specifically in the medial forefoot. Muscle fatigue as defined by a decreased median frequency observed in isometric, constant force contractions did not correspond with our hypothesis in relation to the observed foot strike change pattern. Finally, step rate increased and step length decreased after the 50-km run in both shoe type conditions.ConclusionMore runners adopted a more posterior initial contact area after the 50-km run in the traditional shoe type than in the minimalist shoe type. The runners who adopted a more posterior initial contact area were more closely associated with an increased median frequency of the medial gastrocnemius, which suggests there may be a change in motor unit recruitment pattern during long-distance, sustained velocity running. The increased peak pressures observed in the medial forefoot in the minimalist shoe type may predispose to metatarsal stress fractures in the setting of improper training.  相似文献   

10.
PurposeThis study used downhill running as a model to investigate the repeated bout effect (RBE) on neuromuscular performance, running biomechanics, and metabolic cost of running.MethodsTen healthy recreational male runners performed two 30-min bouts of downhill running (DR1 and DR2) at a –20% slope and 2.8 m/s 3 weeks apart. Neuromuscular fatigue, level running biomechanics during slow and fast running, and running economy parameters were recorded immediately before and after the downhill bouts, and at 24 h, 48 h, 72 h, 96 h, and 168 h thereafter (i.e., follow-up days).ResultsAn RBE was confirmed by attenuated muscle soreness and serum creatine kinase rise after DR2 compared to DR1. An RBE was also observed in maximum voluntary contraction (MVC) force loss and voluntary activation where DR2 resulted in attenuated MVC force loss and voluntary activation immediately after the run and during follow-up days. The downhill running protocol significantly influenced level running biomechanics; an RBE was observed in which center of mass excursion and, therefore, lower-extremity compliance were greater during follow-up days after DR1 compared to DR2. The observed changes in level running biomechanics did not influence the energy cost of running.ConclusionThis study demonstrated evidence of adaptation in neural drive as well as biomechanical changes with the RBE after DR. The higher neural drive resulted in attenuated MVC force loss after the second bout. It can be concluded that the RBE after downhill running manifests as changes to global and central fatigue parameters and running biomechanics without substantially altering the energy cost of running.  相似文献   

11.
ABSTRACT

Hill running is often used as a foundational training mechanism to build strength and speed. Distance runners in particular are at an increased likelihood of encountering steep hills during training runs. There is limited research regarding downhill running, and there is no research available on the biomechanics of females specifically during downhill running. The purpose of this study was to quantify the differences in loading when running downhill at different grades compared to a level surface in female distance runners to determine the potential risk for injury. Fifteen female distance runners (age: 23.5 ± 4.9 y), who ran 56.3 ± 20.9 km a week participated in this study. Participants ran on a force-instrumented treadmill at 4.0 m/s for 2 min at 0%, ?5%, ?10%, ?15%, and ?20% grades, with 5 min of rest between conditions. Study findings showed increased impact forces (p < 0.001), and increased loading rates (p < 0.001) with increasing downhill grades compared to level. These results indicate a significantly greater risk of overuse injury to the lower extremity with steeper downhill grades. Individuals need to be aware of these risks to plan and implement training programmes that will increase performance while minimising injury risk.  相似文献   

12.
This study investigated the normal and parallel ground reaction forces during downhill and uphill running in habitual forefoot strike and habitual rearfoot strike (RFS) runners. Fifteen habitual forefoot strike and 15 habitual RFS recreational male runners ran at 3 m/s ± 5% during level, uphill and downhill overground running on a ramp mounted at 6° and 9°. Results showed that forefoot strike runners had no visible impact peak in all running conditions, while the impact peaks only decreased during the uphill conditions in RFS runners. Active peaks decreased during the downhill conditions in forefoot strike runners while active loading rates increased during downhill conditions in RFS runners. Compared to the level condition, parallel braking peaks were larger during downhill conditions and parallel propulsive peaks were larger during uphill conditions. Combined with previous biomechanics studies, our findings suggest that forefoot strike running may be an effective strategy to reduce impacts, especially during downhill running. These findings may have further implications towards injury management and prevention.  相似文献   

13.
PurposeThis study aimed to investigate if changing the midsole bending stiffness of athletic footwear can affect the onset of lower limb joint work redistribution during a prolonged run.MethodsFifteen trained male runners (10-km time of <44 min) performed 10-km runs at 90% of their individual speed at lactate threshold (i.e., when change in lactate exceeded 1 mmol/L during an incremental running test) in a control and stiff shoe condition on 2 occasions. Lower limb joint kinematics and kinetics were measured using a motion capture system and a force-instrumented treadmill. Data were acquired every 500 m.ResultsProlonged running resulted in a redistribution of positive joint work from distal to proximal joints in both shoe conditions. Compared to the beginning of the run, less positive work was performed at the ankle (approximately 9%; p ≤ 0.001) and more positive work was performed at the knee joint (approximately 17%; p ≤ 0.001) at the end of the run. When running in the stiff shoe condition, the onset of joint work redistribution at the ankle and knee joints occurred at a later point during the run.ConclusionA delayed onset of joint work redistribution in the stiff condition may result in less activated muscle volume, because ankle plantar flexor muscles have shorter muscles fascicles and smaller cross-sectional areas compared to knee extensor muscles. Less active muscle volume could be related to previously reported decreases in metabolic cost when running in stiff footwear. These results contribute to the notion that footwear with increased stiffness likely results in reductions in metabolic cost by delaying joint work redistribution from distal to proximal joints.  相似文献   

14.
The aim of this study was to identify the kinematic and postural characteristics associated with sprint running on uphill and downhill slopes of 3 degrees and on a horizontal surface. Eight male physical education students were filmed while sprinting maximally on an uphill-downhill platform under each of three conditions: (a) uphill at 3 degrees, (b) downhill at 3 degrees and (c) horizontal. Running speed, step rate, step length, step time, contact time, flight time and selected postural characteristics of the step cycle were analysed. Running speed was 9.2% faster (P < 0.05) during downhill and 3.0% slower (P < 0.05) during uphill compared with horizontal sprint running. During downhill and uphill sprint running, step length was the main contributor to the observed changes in running speed. It increased by 7.1% (P < 0.05) for downhill sprint running and was associated with significant changes in posture at touchdown and take-off. During uphill sprint running, step length decreased by 5.2% (P < 0.05), which was associated with significant changes in posture and reduced flight distance. Given the interaction between the acute changes in step length and posture when sprinting on a sloping surface, our findings suggest that such changes in posture may detract from the specificity of training on such surfaces. The chronic effects of training on such slopes on the kinematics and posture of horizontal sprint running are currently unclear.  相似文献   

15.
This study aimed to determine whether the fatigue induced by a mountain ultramarathon (MUM) led to changes in energy cost and kinematic during level and graded running. Pre- and post-race, 14 ultratrail runners ran on a level, uphill (5%) and downhill (5%) treadmill at 10 km · h?1. Kinematic data were acquired using a photocell system. Post-race, the downhill energy cost increased by 13.1% (P < 0.001). No change was noted in level and uphill running. Duty factor and stride frequency were increased, whereas swing time, cycle time and stride length were decreased in all conditions (P < 0.05). Contact time was increased and the rate of force generation was decreased only in the uphill and downhill conditions (P < 0.05). Positive correlations were observed between performance time and the pre- to post-changes in the energy cost of level (r = 0.52, P = 0.04) and uphill running (r = 0.50, P = 0.04). MUM-induced fatigue resulted in physiological and spatiotemporal changes, though the response to fatigue varied considerably between running conditions. These changes resulted in a significant increment only in the downhill energy cost. Incorporating downhill locomotion in the training programmes of ultratrailers may help to improve performance-related physiological and biomechanical parameters.  相似文献   

16.
Abstract

The aim of this study was to investigate the effect of using poles on foot–ground interaction during trail running with slopes of varying incline. Ten runners ran on a loop track representative of a trail running field situation with uphill (+9°), level and downhill (?6°) sections at fixed speed (3.2 m.s?1). Experimental conditions included running with (WP) and without (NP) the use of poles for each of the three slopes. Several quantitative and temporal foot–ground interaction parameters were calculated from plantar pressure data measured with a portable device. Using poles induced a decrease in plantar pressure intensity even when the running velocity stayed constant. However, the localisation and the magnitude of this decrease depended on the slope situations. During WP level running, regional analysis of the foot highlighted a decrease of the force time integral (FTI) for absolute (FTIabs; ?12.6%; P<0.05) and relative values (FTIrel; ?14.3%; P<0.05) in the medial forefoot region. FTIabs (?14.2%; P<0.05) and duration of force application (Δt; ?13.5%; P<0.05) also decreased in the medial heel region when WP downhill running. These results support a facilitating effect of pole use for propulsion during level running and for the absorption phase during downhill running.  相似文献   

17.
This study investigated the effects of body mass and shoe midsole hardness on kinetic and perceptual variables during the performance of three basketball movements: (1) the first and landing steps of layup, (2) shot-blocking landing and (3) drop landing. Thirty male basketball players, assigned into “heavy” (n = 15, mass 82.7 ± 4.3 kg) or “light” (n = 15, mass 63.1 ± 2.8 kg) groups, performed five trials of each movement in three identical shoes of varying midsole hardness (soft, medium, hard). Vertical ground reaction force (VGRF) during landing was sampled using multiple wooden-top force plates. Perceptual responses on five variables (forefoot cushioning, rearfoot cushioning, forefoot stability, rearfoot stability and overall comfort) were rated after each movement condition using a 150-mm Visual Analogue Scale (VAS). A mixed factorial analysis of variance (ANOVA) (Body Mass × Shoe) was applied to all kinetic and perceptual variables. During the first step of the layup, the loading rate associated with rearfoot contact was 40.7% higher in the “heavy” than “light” groups (P = .014) and 12.4% higher in hard compared with soft shoes (P = .011). Forefoot peak VGRF in a soft shoe was higher (P = .011) than in a hard shoe during shot-block landing. Both “heavy” and “light” groups preferred softer to harder shoes. Overall, body mass had little effect on kinetic or perceptual variables.  相似文献   

18.
Research to enhance running performance has led to the design of a leaf spring-structured midsole shoe (LEAF). In treadmill running, it has been shown that LEAF led to an increased running economy and increased stride length (SL) through a horizontal foot shift during stance compared to a standard foam shoe (FOAM). The purpose of this study was to analyse whether (a) these findings can also be observed in overground running and (b) relations exist between spatio-temporal variables and running economy. Ten male long-distance heel-strike runners ran at their individual 2?mmol/l blood lactate speed with LEAF and FOAM in randomized order. Kinematic data were recorded with an inertial measurement unit synchronized with 2D video. Oxygen consumption was measured using an automated metabolic gas analysis system. Blood lactate was collected after each run. The strike pattern was unaffected by LEAF. SL was increased by 0.9?±?1.1?cm (95% CI 0.2 to 1.5; p?=?.040; dz?=?0.76), stride rate (SR) was reduced by ?0.4?±?0.3?strides/min (95% CI ?0.6 to ?0.1; p?=?.029; dz?=?0.82) and oxygen consumption tended to be reduced by 1% (?0.4?±?0.6?ml/min/kg; 95% CI ?0.8 to 0.0; p?=?.082; dz?=?0.62) when running with LEAF compared to FOAM. Changes in oxygen consumption in LEAF were correlated with SL (r?=?0.71; p?=?.022) and SR (r?=??0.68; p?=?.031). It can be concluded that LEAF has the potential to cause small changes in spatio-temporal variables during running. Runners increasing SL and decreasing SR in response to LEAF can achieve small improvements in running economy, which is beneficial in terms of performance.  相似文献   

19.
聚焦跑步时髌股关节生物力学特征,探究穿着不同极简指数(MI)跑鞋对髌股关节接触力、应力等的即刻影响。选取15名习惯后跟着地的健康男性跑者,分别穿着两种MI跑鞋(MI 86%极简跑鞋和MI 26%缓冲跑鞋),使用Vicon红外运动捕捉系统、Kistler三维测力台同步采集3.33 m/s(速度变化范围±5%)跑速下的膝、踝关节运动学和地面反作用力,通过逆向动力学等计算股四头肌肌力、髌股关节接触力、髌股关节接触面积以及髌股关节接触应力。结果显示:两种跑鞋条件下的冲击力峰值和蹬地力峰值均无明显差异。与缓冲跑鞋相比,穿着极简跑鞋跑步时,膝关节最大屈曲角度显著降低(P<0.01);髌股关节接触面积显著减小(P<0.01);膝关节伸肌峰值力矩显著下降(P<0.01);髌股关节接触力和应力峰值均显著减小(P<0.05)。研究表明,相比缓冲跑鞋,穿着极简跑鞋在未影响触地后冲击力峰值的同时,通过降低伸膝力矩大幅度减少髌股关节接触力(下降17.02%)、降低髌股关节接触应力,从而有效改善支撑期髌股关节负荷,为进一步减小髌股关节疼痛综合征风险提供可能。  相似文献   

20.
ABSTRACT

Previous research on unstable footwear has suggested that it may induce mechanical noise during walking. The purpose of this study was to explore whether unstable footwear could be considered as a noise-based training gear to exercise body center of mass (CoM) motion during walking. Ground reaction forces were collected among 24 healthy young women walking at speeds between 3 and 6 km h?1 with control running shoes and unstable rocker-bottom shoes. The external mechanical work, the recovery of mechanical energy of the CoM during and within the step cycles, and the phase shift between potential and kinetic energy curves of the CoM were computed. Our findings support the idea that unstable rocker-bottom footwear could serve as a speed-dependent noise-based training gear to exercise CoM motion during walking. At slow speed, it acts as a stochastic resonance or facilitator that reduces external mechanical work; whereas at brisk speed it acts as a constraint that increases external mechanical work and could mimic a downhill slope.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号