共查询到10条相似文献，搜索用时 234 毫秒
1.
A new PWM converter based on soft-switching is introduced.The converter uses a minimum number of devices,and requires less switching operations than conventional techniques,Switching is realized solely in a ZVS)zero voltage switching)mode,therefore the loss is reduced and EMI(electromagnetic interference)is suppressed.The paper analyzes the operation of ZVS,and discusses the methods for maintaining a unit power factor and constant DC voltage.Changing the modulation index M and the phase angle θ keeps the input current in phase with the voltage.It also keeps the current sinusoidal,and ensures a constant output voltage. 相似文献
2.
PWM逆变器载波方式的选择 总被引：1，自引：2，他引：1
In this paper the influence of different carrier waveforms upon the output characteristics of PWM inverter is described in detail. When a triangular carrier waveform is used in hard-switching PWM inverters, harmonics exist in the neighborhood of the output frequency of the inverter output voltage and current due to the dead time. The triangular carrier waveform used in soft-switching PWM inverter will cause difficulties in controlling resonance-trigger time, higher loss in the resonant circuit, and less utilization of the DC bus voltage. If a sawtooth carrier is used in hard-switching PWM inverter, there will be severe distortion in the current waveform. When sawtooth carriers with alternate positive and negative slopes are used in soft-switching PWM inverters, the resonancetrigger time is easy to control, and distortion in the output voltage and current caused by the dead time will not appear. 相似文献
3.
沈华 《南通职业大学学报》2009,23(2):89-92
随着新型功率器件的日趋成熟,更灵活可靠的数字控制是开关电源的发展方向。基于此,采用了先进精简指令集运算机（ARM）处理器来实现脉宽调制（PWM）移相控制信号的输出,以实现软开关电源PWM反馈回路的数字控制。实验结果表明,设计能达到预期的性能要求。 相似文献
4.
ZVS（zero voltage switching） PWM（pulse width modulation） inverters have attracted much attention recently. The basic idea is to use ZVS circuit as the main circuit of inverter resonance at the beginning of every carrier period so that each power device can commutate when voltage of the main circuit＇s DC bus line is zero. To ensure the resonant circuit to operate properly, sawtooth with alternate slope （positive or negative） is used as carrier. But the time of zero voltage vectors with such PWM pattern is greatly different from traditional hard-switching PWM pattern. This paper discusses the locus of flux linkage under soft-switching PWM pattern by using space voltage vector. It is pointed out that, under the hard-switching PWM pattern, speed of flux linkage is adjusted by zero space voltage vector. When soft-switching PWM pattern is used, however, effective time of space voltage vector varies considerably, sometimes even without zero space voltage vector. Therefore non-zero space voltage vector has been used to make the speed of flux linkage locus equal to that of hard-switching PWM pattern. The cause of current distortion in soft-switching PWM inverters is also discussed. Based on the flux linkage locus circle, corresponding compensation methods are proposed. Experimental results show that the described method can effectively improve output current waveform of inverter. 相似文献
5.
结实型谐振支路及其在软开关变换器中的应用 总被引：1，自引：0，他引：1
本文给出了结实型谐振支路实现软开关的工作原理和运行特性 ,详细讨论了结实型谐振支路拓扑在软开关直直变换器和软开关逆变器中的各种应用 .结实型谐振支路可构成升降压软开关直直变换器、具有输出功率自动限制特性的隔离型软开关直直变换器 ,可实现部分串联谐振直直变换器功率管的零电压、零电流开关 ,可用于移相控制全桥直直变换器实现滞后桥臂功率管的软开关 ,可构成结实型谐振极逆变器和结实型谐振直流环节逆变器 .本文对各变换器的工作原理、特性、实现软开关的条件进行了讨论 ,给出了实验和仿真波形 . 相似文献
6.
针对中小型光伏发电系统的特点,基于两级式变流器结构,前级采用隔离型全桥DC/DC升压电路,使用移相PWM软开关控制,后级采用全桥逆变电路,使用单极性倍频SPWM控制,研制了1kW的光伏逆变系统。该系统具有独立/并网两种工作模式,可稳定输出标准正弦单相220V/50Hz交流电压。 相似文献
7.
BAO Jian-yu LI Yu-ling ZHANG Zhong-chao 《浙江大学学报(A卷英文版)》2006,7(6):1051-1055
INTRODUCTION Up to now, multilevel voltage-source inverters(VSIs) (Fang, 2001) have been paid more attentionthan multilevel current-source inverters (CSIs) in thehigh-power fields. One of the most important reasonsis that inductors, as energy storage elements, have thedisadvantages of higher conducting losses and lowerenergy storage efficiency than capacitors. However,with the development of superconducting magneticenergy storage (SMES) technology (Luongo, 1996),superconducting induc… 相似文献
8.
In comparison with several zero-voltage transition (ZVT) inverter topologies,a double-PWM converter is presented using a simple ZVT topology.The rectifier and inverter of this double-PWM share a set of commutation circuit which can provide soft-switching for the power devices and the diodes.The commutation circuit consists of 1 auxiliary device,6 resonant inductors,and 12 diodes.Its topology is simpler than the conventional auxiliary resonant converter,leading to low loss and easy control.The control strategy and resonant working modes are analyzed.Experimental results show good performance of the system. 相似文献
9.
Multilevel inverter has become increasingly popular in recent years due to advantages of high power quality waveforms ,low switching losses,and high-voltage capability. A novel multilevel inverter with minimum number of separated DC sources is presented in this paper.Three-phase output voltages of this inverter can easily be balanced they are synthesized by using the same DC sources.A harmonic reduction method eliminating both the 5th and 7th harmonics is proposed.Finally,comparison results and spectral analysis are presented. 相似文献
10.
The magamp （magnetic amplifier） is widely used in power supplies due to its low cost, simplicity and other advantages. This paper discusses a novel application of the magamp in switching power supplies, where the magamp is used to regulate pulse width modulation （PWM） instead of power signal in the main circuit. This method extends the application of the magamp in power supplies, and makes it possible to further regulate control signal when PWMs have been generated. Based on this applica- tion, a new current-sharing （CS） scheme using the magamp is proposed, which uses a modified inner loop CS structure. In this scheme PWMs are generated by one main controller, and CS is achieved by regulating PWMs using a magamp in each module. Compared with traditional application of the magamp, the new CS scheme can be used in most topologies and only requires magamps of low power capacity. Then a test circuit of parallel power supply is developed, in which CS is achieved by a PWM regulator with the magamp. The proposed scheme is also used to upgrade an electroplate power to make it capable of paralleling supplies. Experimental results show that the proposed scheme has good CS performance. 相似文献