首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
  相似文献   

2.
Fencing is a high-intensity sport involving dynamic movements such as the lunge exposing the musculoskeletal system to high impact forces, which emphasises the importance of the shock attenuating properties of footwear as a factor in the prevention of injury. The aim of this study was to investigate the magnitudes of the transient axial impact shock experienced at the tibia between traditional fencing shoes and standard athletic footwear during the impact phase of the fencing lunge. Peak tibial shock was measured in 19 male fencers in 4 different footwear conditions using an accelerometer placed on the distal aspect of the tibia. The standard footwear (11.08 g and 8.75 g for squash and running shoe, respectively) resulted in significant (p < 0.01) reductions in peak impact shock in comparison to the traditional fencing shoes (15.93 g and 13.97 g for the Adidas and Hi-Tec shoe, respectively). No significant differences were found between the running and squash shoes (p = 0.09) or between the fencing shoes (p = 0.48). The documented reduction in impact shock found suggests that running or squash specific footwear may reduce overuse injury occurrence, indicating that there is justification for a re-design of fencing shoes.  相似文献   

3.
Abstract

Twelve participants ran (9 km · h?1) to test two types of running shoes: replica and original shoes. Ground reaction force, plantar pressure and electromyographic activity were recorded. The shoes were tested randomly and on different days. Comparisons between the two experimental conditions were made by analysis of variance (ANOVA) test (P ≤ 0.05). The time to first peak, loading rate of the first peak and impulse of the first 75 ms of stance were significantly different between the shoes (P ≤ 0.05), revealing an increase of impact forces for the replica shoes. The peak plantar pressure values were significantly higher (P ≤ 0.05) when wearing replica shoes. During running, the contact area was significantly smaller (P ≤ 0.05) for the replica shoe. The electromyographic activity of the analysed muscles did not show changes between the two shoes in running. These findings suggest that the use of replica running shoes can increase the external load applied to the human body, but may not change the muscle activity pattern during locomotion. This new mechanical situation may increase the risk of injuries in these movements.  相似文献   

4.
This study sought to compare the kinetics and kinematics data in a group of habitual shod runners when running in traditional running shoes and newly designed minimalist shoes with lug platform. This novel footwear design claims to simulate barefoot running and reduce energy loss during impact. We compared footstrike angle (FSA), vertical average (VALR) and instantaneous (VILR) loading rates, energy loss and initial vertical stiffness between two shoe conditions. Runners demonstrated a decreased FSA while running in minimalist shoes with lug platform than traditional shoes (P = 0.003; Cohen’s d = 0.918). However, we did not observe a landing pattern transition. VALR and VILR between two footwear conditions showed no significant difference (P = 0.191–0.258; Cohen’s d = 0.304–0.460). Initial vertical stiffness (P = 0.032; Cohen’s d = 0.671) and energy loss (P = 0.044; Cohen’s d = 0.578) were greater when running in minimalist shoes with lug platform. The results show that minimalist shoes with lug platform reduce the FSA but may not lead to a landing pattern switch or lower vertical loading rates. Interestingly, the new shoe design leads to a greater energy loss than traditional running shoes, which could be explained by a higher initial vertical stiffness.  相似文献   

5.
Multiple playing surfaces and footwear used in American football warrant a better understanding of relationship between different combinations of turf and footwear. The purpose of this study was to examine effects of shoe and stud types on ground reaction force (GRF) and ankle and knee kinematics of a 180° cut and a single-leg 90° land-cut on synthetic turf. Fourteen recreational football players performed five trials of the 180° cut and 90° land-cut in three shoe conditions: non-studded running shoe, and football shoe with natural and synthetic turf studs. Variables were analyzed with a 3 × 2 (shoe × movement) repeated measures analysis of variance (p < 0.05). Peak vertical GRF (p < 0.001) and loading rate (p < 0.001) were greater during 90° land-cut than 180° cut. For 180° cut, natural turf studs produced smaller peak medial GRFs compared to synthetic turf studs and non-studded shoe (p = 0.012). For land-cut, peak eversion velocity was reduced in running shoes compared to natural (p = 0.016) and synthetic (p = 0.002) turf studs. The 90° land-cut movement resulted in greater peak vertical GRF and loading rate compared to the 180° cut. Overall, increased GRFs in the 90° land-cut movement may increase the chance of injury.  相似文献   

6.
The purpose of this study was to determine if minimalist shoes improve time trial performance of trained distance runners and if changes in running economy, shoe mass, stride length, stride rate and footfall pattern were related to any difference in performance. Twenty-six trained runners performed three 6-min sub-maximal treadmill runs at 11, 13 and 15 km·h?1 in minimalist and conventional shoes while running economy, stride length, stride rate and footfall pattern were assessed. They then performed a 5-km time trial. In the minimalist shoe, runners completed the trial in less time (effect size 0.20 ± 0.12), were more economical during sub-maximal running (effect size 0.33 ± 0.14) and decreased stride length (effect size 0.22 ± 0.10) and increased stride rate (effect size 0.22 ± 0.11). All but one runner ran with a rearfoot footfall in the minimalist shoe. Improvements in time trial performance were associated with improvements in running economy at 15 km·h?1 (r = 0.58), with 79% of the improved economy accounted for by reduced shoe mass (P < 0.05). The results suggest that running in minimalist shoes improves running economy and 5-km running performance.  相似文献   

7.
Shoe manufacturers launch running shoes with increased (e.g., maximalists) or decreased (e.g., minimalists) midsole thickness and claim that they may prevent running injury. Previous studies tested footwear models with different midsole thicknesses on the market but the shoe construct was not strictly comparable. Therefore, in the present study, we examined the effect of midsole thickness, from 1-mm to 29-mm, in a standard test shoe prototype on the vertical loading rates, footstrike angle and temporal spatial parameters in distance runners. Fifteen male habitual rearfoot strikers were recruited from local running clubs. They were asked to run on an instrumented treadmill in shoes with different midsole thicknesses. We found significant interactions between midsole thickness with vertical loading rates (p < 0.001), footstrike angle (p = 0.013), contact time (p < 0.001), cadence (p = 0.003), and stride length (p = 0.004). Specifically, shoes with thinner midsole (1- and 5-mm) significantly increased the vertical loading rates and shortened the contact time, when compared with thicker midsole shoes (25- and 29-mm). However, we did not observe any substantial differences in the footstrike angle, cadence and stride length between other shod conditions. The present study provides biomechanical data regarding the relationship between full spectrum midsole thicknesses and running biomechanics in a group of rearfoot strikers.  相似文献   

8.
This study investigated whether male runners improve running performance, running economy, ankle plantar flexor strength, and alter running biomechanics and lower limb bone mineral density when gradually transitioning to using minimalist shoes for 100% of weekly running. The study was a planned follow-up of runners (n?=?50) who transitioned to minimalist or conventional shoes for 35% of weekly structured training in a previous 6-week randomised controlled trial. In that trial, running performance and economy improved more with minimalist shoes than conventional shoes. Runners in each group were instructed to continue running in their allocated shoe during their own preferred training programme for a further 20 weeks while increasing allocated shoe use to 100% of weekly training. At the 20-week follow-up, minimalist shoes did not affect performance (effect size: 0.19; p?=?0.218), running economy (effect size: ≤?0.24; p?≥?0.388), stride rate or length (effect size: ≤?0.12; p?≥?0.550), foot strike (effect size: ≤?0.25; p?≥?0.366), or bone mineral density (effect size: ≤?0.40; p?≥?0.319). Minimalist shoes increased plantar flexor strength more than conventional shoes when runners trained with greater mean weekly training distances (shoe*distance interaction: p?=?0.036). After greater improvements with minimalist shoes during the initial six weeks of a structured training programme, increasing minimalist shoe use from 35% to 100% over 20 weeks, when runners use their own preferred training programme, did not further improve performance, running economy or alter running biomechanics and lower limb bone mineral density. Minimalist shoes improved plantar flexor strength more than conventional shoes in runners with greater weekly training distances.  相似文献   

9.
In this study, we evaluated the protective functions of cloth sport shoes, including cushioning and lateral stability. Twelve male students participated in the study (mean ± s: age 12.7 ± 0.4 years, mass 40.7 ± 5.9 kg, height 1.50 ± 0.04 m). Cloth sport shoes, running shoes, basketball shoes, cross-training shoes, and barefoot conditions were investigated in random sequence. Human pendulum and cutting movement tests were used to assess cushioning performance and lateral stability, respectively. For cushioning, the running shoes (2.06 body weight, BW) performed the best, while the cross-training shoes (2.30 BW) and the basketball shoes (2.37 BW) both performed better than the cloth sport shoes (2.55 BW) and going barefoot (2.63 BW). For the lateral stability test, range of inversion–eversion was found to be from 3.6 to 4.9°, which was far less than that for adult participants (> 20°). No significant differences were found between conditions. All conditions showed prolonged durations from foot-strike to maximum inversion (66–95 ms), which was less vigorous than that for adult participants ( < 40 ms) and was unlikely to evoke intrinsic stability failure. In conclusion, the cloth sport shoe showed inferior cushioning capability but the same lateral stability as the other sports shoes for children.  相似文献   

10.
Metatarsal and midfoot injuries are common in American football. Footwear design may influence injury rates by altering plantar foot loading patterns in these regions. The purpose of this study was to determine the effect of cleat design on in-shoe plantar foot loading during a football-specific, resisted pushing task. Twenty competitive football players (age 14.7 ± 1.8 years, height 1.72 ± 0.10 m, and mass 71.8 ± 26.9 kg) completed three trials of pushing a weighted sled at maximal effort in a standard shoe (CLEAT) and artificial turf-specific shoe (TURF), with flexible in-shoe force measuring insoles. Repeated measures ANOVAs identified mean differences in maximum force and relative load under all regions of the foot. Results showed higher forces in the CLEAT under the medial (p < 0.001) and lateral (p = 0.004) midfoot, central (p = 0.007) and lateral (p < 0.001) forefoot, and lesser toes (p = 0.01), but lower forces in the hallux (p = 0.02) compared to the TURF shoe. Additionally, relative loading was higher in the CLEAT under the medial (p < 0.001) and lateral (p = 0.002) midfoot and lateral (p < 0.001) forefoot, but lower in the medial forefoot (p = 0.006) and hallux (p < 0.001) compared to the TURF shoe. The two shoes elicited distinct plantar loading profiles and may influence shoe selection decisions during injury prevention or rehabilitation practices.  相似文献   

11.
ABSTRACT

The choice of marathon racing shoes can greatly affect performance. The purpose of this study is to metabolically and mechanically compare the consumer version of the Nike Vaporfly 4% shoe to two other popular marathon shoes, and determine differences in running economy. Nineteen subjects performed two 5-minute trials at 4.44m/s wearing the Adidas Adios Boost (AB), Nike Zoom Streak (ZS), and Nike Vaporfly 4% (VP) in random order. Oxygen uptake was recorded during minutes 3–5 and averaged across both shoe trials. On a second day, subjects wore reflective markers, and performed a 3-minute trial in each shoe. Motion and force data were collected over the final 30 seconds of each trial. VP oxygen uptake was 2.8% and 1.9% lower than the AB and ZS. Stride length, plantar flexion velocity, and center of mass vertical oscillation were significantly different in the VP. The percent benefit of the VP over AB shoe was predicted by subject ground time. These results indicate that use of the VP shoe results in improved running economy, partially due to differences in running mechanics. Subject variation in running economy improvement is only partially explained by variation in ground time.  相似文献   

12.
BackgroundCompared to conventional racing shoes, Nike Vaporfly 4% running shoes reduce the metabolic cost of level treadmill running by 4%. The reduction is attributed to their lightweight, highly compliant, and resilient midsole foam and a midsole-embedded curved carbon-fiber plate. We investigated whether these shoes also could reduce the metabolic cost of moderate uphill (+3°) and downhill (–3°) grades. We tested the null hypothesis that, compared to conventional racing shoes, highly cushioned shoes with carbon-fiber plates would impart the same ～4% metabolic power (W/kg) savings during uphill and downhill running as they do during level running.MethodsAfter familiarization, 16 competitive male runners performed six 5-min trials (2 shoes × 3 grades) in 2 Nike marathon racing-shoe models (Streak 6 and Vaporfly 4%) on a level, uphill (+3°), and downhill (–3°) treadmill at 13 km/h (3.61 m/s). We measured submaximal oxygen uptake and carbon dioxide production during Minutes 4–5 and calculated metabolic power (W/kg) for each shoe model and grade combination.ResultsCompared to the conventional shoes (Streak 6), the metabolic power in the Vaporfly 4% shoes was 3.83% (level), 2.82% (uphill), and 2.70% (downhill) less (all p < 0.001). The percent of change in metabolic power for uphill running was less compared to level running (p = 0.04; effect size (ES) = 0.561) but was not statistically different between downhill and level running (p = 0.17; ES = 0.356).ConclusionOn a running course with uphill and downhill sections, the metabolic savings and hence performance enhancement provided by Vaporfly 4% shoes would likely be slightly less overall, compared to the savings on a perfectly level race course.  相似文献   

13.
Abstract

Running shoe construction influences the forces experienced by the human body while running. The aim of this study was to ascertain whether the new sole architecture of the On running shoe reduces ground reaction forces compared with running barefoot or with a conventional running shoe and whether it changes the physiological parameters of running in shoes. Thirty-seven trained male participants were studied while running at submaximal speeds wearing their conventional running shoe, wearing the On running shoe and while barefoot. Additional biomechanical and physiological values were investigated to determine whether the On running shoe induced any changes in these parameters compared with conventional running shoes. The On exhibited similar ground reaction forces as conventional shoes, and these were different from the forces experienced while running barefoot, showing that the On was more similar to typical shoed running. No difference was observed in running economy between the On and a conventional shoe model. However, a slightly lower heart rate (HR) (≈1.3%) and blood lactate concentration (≈5.5%) were observed during submaximal running with the On running shoe compared with a conventional running shoe, as well as a greater lateral deviation of the centre of pressure mid-stance. The ramifications of the reduced HR and blood lactate concentration for competitive performance are unknown.  相似文献   

14.
ABSTRACT

This study examined potential differences between maximally cushioned (MAX) shoes and standard cushioned (STND) shoes during countermovement vertical jump (CMVJ) performance. Twenty-one males (23[2] y; 86.5[15.4] kg; 179.8[6.3] cm) completed eight jumps each in MAX and STND shoes while three-dimensional kinematic and kinetic data were collected. Paired-samples t-tests (α = 0.05) and Cohen’s d effect sizes (ES) were used to compare the following variables: vertical jump displacement, jump time, hip, knee and ankle joint angles at the start of the countermovement, the end of the unloading phase, the end of the eccentric phase, and at takeoff, peak joint power, and the joint contributions to total lower extremity work during the eccentric and concentric phases. The ankle was more dorsiflexed at the end of the countermovement in the MAX shoe (p = 0.002; ES = 0.55) but greater plantarflexion occurred in the STND shoes at takeoff (p = 0.028; ES = 0.56). No other differences were observed. The result of this study suggests that unique ankle joint angular positioning may be employed when wearing MAX versus STND shoes. Since the unique ankle joint positioning did not alter jump performance, potential MAX footwear users might not need to consider the potential for altered CMVJ performance when determining whether to adopt MAX footwear.  相似文献   

15.
Abstract

This study investigates the effect of running shoes’ aging on mechanical and biomechanical parameters as a function of midsole materials (viscous, intermediate, elastic) and ground inclination. To this aim, heel area of the shoe (under calcaneal tuberosity) was first mechanically aged at realistic frequency and impact magnitudes based on a 660 km training plan. Stiffness (ST) and viscosity were then measured on both aged and matching new shoes, and repercussions on biomechanical variables (joint kinematics, muscular pre-activation, vertical ground reaction force and tibial acceleration) were assessed during a leg-extended stepping-down task designed to mimic the characteristics of running impacts. Shoes’ aging led to increased ST (means: from 127 to 154 N ? mm?1) and decreased energy dissipation (viscosity) (means: from 2.19 to 1.88 J). The effects induced by mechanical changes on body kinematics were very small. However, they led with the elastic shoe to increased vastus lateralis pre-activation, tibial acceleration peak (means: from 4.5 g to 5.2 g) and rate. Among the three shoes tested, the shoe with intermediate midsole foam provided the best compromise between viscosity and elasticity. The optimum balance remains to be found for the design of shoes regarding at once cushioning, durability and injury prevention.  相似文献   

16.
This study investigated the effects of body mass and shoe midsole hardness on kinetic and perceptual variables during the performance of three basketball movements: (1) the first and landing steps of layup, (2) shot-blocking landing and (3) drop landing. Thirty male basketball players, assigned into “heavy” (n = 15, mass 82.7 ± 4.3 kg) or “light” (n = 15, mass 63.1 ± 2.8 kg) groups, performed five trials of each movement in three identical shoes of varying midsole hardness (soft, medium, hard). Vertical ground reaction force (VGRF) during landing was sampled using multiple wooden-top force plates. Perceptual responses on five variables (forefoot cushioning, rearfoot cushioning, forefoot stability, rearfoot stability and overall comfort) were rated after each movement condition using a 150-mm Visual Analogue Scale (VAS). A mixed factorial analysis of variance (ANOVA) (Body Mass × Shoe) was applied to all kinetic and perceptual variables. During the first step of the layup, the loading rate associated with rearfoot contact was 40.7% higher in the “heavy” than “light” groups (P = .014) and 12.4% higher in hard compared with soft shoes (P = .011). Forefoot peak VGRF in a soft shoe was higher (P = .011) than in a hard shoe during shot-block landing. Both “heavy” and “light” groups preferred softer to harder shoes. Overall, body mass had little effect on kinetic or perceptual variables.  相似文献   

17.
Abstract

Ethylene vinyl acetate and polyurethane are widely used materials for shoe midsoles. The present study investigated the durability of running shoes made from ethylene vinyl acetate and one type of polyurethane (polyurethane-1), which have similar hardness and density, and another type of polyurethane (polyurethane-2), which has high hardness/density. All shoes differed from one another only in terms of the midsole material used. Eight male runners participated in the present study and used the shoes to run 500 km (10 × 50 km). The cushioning and energy return characteristics of each shoe were measured using an impact tester before and after each 50-km run. The results showed that as the running distance increased, the peak force of midsole materials changed with different patterns. Ethylene vinyl acetate and polyurethane-1 showed greater cushioning than polyurethane-2 over 500 km (ethylene vinyl acetate, 918.2–968.0 N; polyurethane-1, 909.6–972.9 N; polyurethane-2, 983.0–1105.6 N). Polyurethane-1 showed greater cushioning from 200 km to 300 km compared with 0 km (0 km, 972.9 ± 66.3 N; 200 km, 909.6 ± 61.2 N; 250 km, 921.9 ± 51.2 N; 300 km, 924.6 ± 51.9 N). The cushioning of ethylene vinyl acetate shoes was diminished after 500 km compared with that at 0 km (968.0 ± 25.9 N vs. 921.1 ± 20.1 N). Ethylene vinyl acetate resulted in greater energy returns than polyurethane. Both foam category and hardness/density affected the critical biomechanical properties of running shoes.  相似文献   

18.
ABSTRACT

Loading rates have been linked to running injuries, revealing persistent impact features that change direction among three-dimensional axes in different footwear and footstrike patterns. Extracting peak loads from ground reaction forces, however, can neglect the time-varying loading patterns experienced by the runner in each footfall. Following footwear and footstrike manipulations during laboratory-based overground running, we examined three-dimensional loading rate-time features in each direction (X, Y, Z) using principal component analysis. Twenty participants (9 M, 11 F, age: 25.3 ± 3.6 y) were analysed during 14 running trials in each of two footwear (cushioned and minimalist) and three footstrike conditions (forefoot, midfoot, rearfoot). Two principal components (PC) captured the primary loading rate-time features (PC1: 42.5% and PC2: 22.8% explained variance) and revealed interaction among axes, footwear, and footstrike conditions (PC1: F (2.1, 40.1) = 5.6, p = 0.007, η 2 = 0.23; PC2: F (2.0, 38.4) = 62.3, p < 0.001, η 2 = 0.77). Rearfoot running in cushioned footwear attenuated impact loads in the vertical direction, and forefoot running in minimalist footwear attenuated impact loads in the anterior-posterior and medial-lateral directions relative to forefoot running in cushioned shoes. Loading patterns depend on footwear and footstrike interactions, which require shoes that match the runner’s footstrike pattern.  相似文献   

19.
This study investigated whether an increase in the forefoot bending stiffness of a badminton shoe would positively affect agility, comfort and biomechanical variables during badminton-specific movements. Three shoe conditions with identical shoe upper and sole designs with different bending stiffness (Flexible, Regular and Stiff) were used. Elite male badminton players completed an agility test on a standard badminton court involving consecutive lunges in six directions, a comfort test performed by a pair of participants conducting a game-like practice trial and a biomechanics test involving a random assignment of consecutive right forward lunges. No significant differences were found in agility time and biomechanical variables among the three shoes. The players wearing the shoe with a flexible forefoot outsole demonstrated a decreased perception of comfort in the forefoot cushion compared to regular and stiffer conditions during the comfort test (p < 0.05). The results suggested that the modification of forefoot bending stiffness would influence individual perception of comfort but would not influence performance and lower extremity kinematics during the tested badminton-specific tasks. It was concluded that an optimisation of forefoot structure and materials in badminton shoes should consider the individual’s perception to maximise footwear comfort in performance.  相似文献   

20.
Despite the growing interest in minimalist shoes, no studies have compared the efficacy of different types of minimalist shoe models in reproducing barefoot running patterns and in eliciting biomechanical changes that make them differ from standard cushioned running shoes. The aim of this study was to investigate the acute effects of different footwear models, marketed as “minimalist” by their manufacturer, on running biomechanics. Six running shoes marketed as barefoot/minimalist models, a standard cushioned shoe and the barefoot condition were tested. Foot–/shoe–ground pressure and three-dimensional lower limb kinematics were measured in experienced rearfoot strike runners while they were running at 3.33 m · s?1 on an instrumented treadmill. Physical and mechanical characteristics of shoes (mass, heel and forefoot sole thickness, shock absorption and flexibility) were measured with laboratory tests. There were significant changes in foot strike pattern (described by the strike index and foot contact angle) and spatio-temporal stride characteristics, whereas only some among the other selected kinematic parameters (i.e. knee angles and hip vertical displacement) changed accordingly. Different types of minimalist footwear models induced different changes. It appears that minimalist footwear with lower heel heights and minimal shock absorption is more effective in replicating barefoot running.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号