首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
This study aimed to correlate, compare, and determine the reliability of force, velocity, and power values collected with a force plate (FP) and a linear transducer during loaded jumps. Twenty-three swimmers performed an incremental loading test at 25, 50, 75, and 100% of their own body weight on a FP. A linear velocity transducer (LVT) was attached to the bar to assess the peak and the mean values of force, velocity, and power. Both the peak variables (r = 0.94 – 0.99 for peak force, r = 0.83 – 0.91 for peak velocity, and r = 0.90–0.94 for peak power; p < 0.001) and the mean variables (r = 0.96–0.99 for mean force, r = 0.87–0.89 for mean velocity, and r = 0.93–0.96 for mean power; p < 0.001) were strongly correlated between both measurement tools. Differences in the shape of the force-, velocity-, and power-time curves were observed. The LVT data showed a steeper increase in these variables at the beginning of the movement, while the FP recorded larger values in the latter part. Peak values were more reliable than mean values. These results suggest that the LVT is a valid tool for the assessment of loaded squat jump.  相似文献   

2.
Knee peak torque (PT) is associated to jump performance in volleyball players. It is not clear whether muscle strength imbalances of the knee joint can influence jump performance. The purpose of study was to analyse the association between PT and knee muscular imbalances with jump performance in professional volleyball players. Eleven elite male volleyball players (90.3 ± 9.7 kg body mass and 1.94 ± 0.06 m height) were evaluated in an isokinetic dynamometer at speeds of 60, 180 and 300 deg/s. Muscle strength imbalances were obtained through calculation of contralateral deficit between limbs and the conventional ratio (hamstrings/quadriceps). Countermovement jump (CMJ) was performed on a force plate to calculate mechanical power and height. Association was found between knee extensor PT at 180 deg/s with CMJ power (r = 0.610, p = 0.046). Conventional ratio at 300 deg/s showed negative association with CMJ (r = ?0.656, p = 0.029). The optimal ratio between knee extensors PT in relation to the flexors PT is associated with the greater mechanical power in CMJ. Contralateral deficit does not seem to be associated with the CMJ performance. Considering the knee extensor PT is associated with CMJ power, our findings suggest that strength-based training in volleyball athletes should not omit the conventional muscle ratio.  相似文献   

3.
Whilst previous research has highlighted significant relationships between golfers’ clubhead velocity (CHV) and their vertical jump height and maximum strength, these field-based protocols were unable to measure the actual vertical ground reaction force (vGRF) variables that may correlate to performance. The aim of this study was to investigate relationships between isometric mid-thigh pull (IMTP), countermovement jump (CMJ), squat jump (SJ) and drop jump (DJ) vGRF variables and CHV in highly skilled golfers. Twenty-seven male category 1 golfers performed IMTP, CMJ, SJ and DJ on a dual force platform. The vertical jumps were used to measure positive impulse during different stretch-shortening cycle velocities, with the IMTP assessing peak force (PF) and rate of force development (RFD). Clubhead velocity was measured using a TrackMan launch monitor at a golf driving range. Pearsons correlation coefficient analyses revealed significant relationships between peak CHV and CMJ positive impulse (r = 0.788, p < 0.001), SJ positive impulse (r = 0.692; p < 0.001), DJ positive impulse (r = 0.561, p < 0.01), PF (r = 0.482, p < 0.01), RFD from 0–150 ms (r = 0.343, p < 0.05) and RFD from 0–200 ms (r = 0.398, p < 0.05). The findings from this investigation indicate strong relationships between vertical ground reaction force variables and clubhead velocity.  相似文献   

4.
There are two perceived criterion methods for measuring power output during the loaded countermovement jump (CMJ): the force platform method and the combined method (force platform + optoelectronic motion capture system). Therefore, the primary aim of the present study was to assess agreement between the force platform method and the combined method measurements of peak power and mean power output during the CMJ across a spectrum of loads. Forty resistance-trained team sport athletes performed maximal effort CMJ with additional loads of 0 (body mass only), 25, 50, 75 and 100% of body mass (BM). Bias was present for peak velocity, mean velocity, peak power and mean power at all loads investigated, and present for mean force up to 75% of BM. Peak velocity, mean velocity, peak power and mean power 95% ratio limits of agreement were clinically unacceptable at all loads investigated. The 95% ratio limits of agreement were widest at 0% of BM and decreased linearly as load increased. Therefore, the force platform method and the combined method cannot be used interchangeably for measuring power output during the loaded CMJ. As such, if power output is to be meaningfully investigated, a standardised method must be adopted.  相似文献   

5.
The current study aimed to assess the validity and test–retest reliability of a linear position transducer when compared to a force plate through a counter-movement jump in female participants. Twenty-seven female recreational athletes (19 ± 2 years) performed three counter-movement jumps simultaneously using the linear position transducer and force plate for validity. In addition, 11 elite female athletes (23 ± 6 years) performed 3 counter-movement jumps with the linear position transducer on three separate days for test–retest reliability. Pearson correlations for jump height between the devices were at a high level (r = .90), with the linear position transducer overestimating jump height by 7.0 ± 2.8 cm. The reliability measured by the linear position transducer resulted in a mean intraclass correlation of .70 for jump height, .90 for peak velocity, and .91 for mean velocity. The linear position transducer was reliable for measuring counter-movement jumps in elite female athletes; however, caution should be taken for one-off jump measures as it may over-estimate jump height.  相似文献   

6.
A number of field-based investigations have evidenced practically significant relationships between clubhead velocity (CHV), vertical jump performance and maximum strength. Unfortunately, whilst these investigations provide a great deal of external validity, they are unable to ascertain vertical ground reaction force (vGRF) variables that may relate to golfers’ CHVs. This investigation aimed to assess if the variance in European Challenge Tour golfers’ CHVs could be predicted by countermovement jump (CMJ) positive impulse (PI), isometric mid-thigh pull (IMTP) peak force (PF) and rate of force development (RFD) from 0–50 ms, 0–100 ms, 0–150 ms and 0–200 ms. Thirty-one elite level European Challenge Tour golfers performed a CMJ and IMTP on dual force plates at a tournament venue, with CHV measured on a driving range. Hierarchical multiple regression results indicated that the variance in CHV was significantly predicted by all four models (model one R2 = 0.379; model two R2 = 0.392, model three R2 = 0.422, model four R2 = 0.480), with Akaike’s information criterion indicating that model one was the best fit. Individual standardised beta coefficients revealed that CMJ PI was the only significant variable, accounting for 37.9% of the variance in European Challenge Tour Golfers’ CHVs.  相似文献   

7.
Examining a countermovement jump (CMJ) force-time curve related to net impulse might be useful in monitoring athletes' performance. This study aimed to investigate the reliability of alternative net impulse calculation and net impulse characteristics (height, width, rate of force development, shape factor, and proportion) and validate against the traditional calculation in the CMJ. Twelve participants performed the CMJ in two sessions (48 hours apart) for test–retest reliability. Twenty participants were involved for the validity assessment. Results indicated intra-class correlation coefficient (ICC) of ≥ 0.89 and coefficient of variation (CV) of ≤ 5.1% for all of the variables except for rate of force development (ICC = 0.78 and CV = 22.3%). The relationship between the criterion and alternative calculations was r = 1.00. While the difference between them was statistically significant (245.96 ± 63.83 vs. 247.14 ± 64.08 N s, p < 0.0001), the effect size was trivial and deemed practically minimal (d = 0.02). In conclusion, variability of rate of force development will pose a greater challenge in detecting performance changes. Also, the alternative calculation can be used practically in place of the traditional calculation to identify net impulse characteristics and monitor and study athletes' performance in greater depth.  相似文献   

8.
This study aimed to compare the effect of 6 weeks of resistance training or combined resistance training and change of direction exercises on physical performance and motor skills in futsal players. Thirty-four futsal players were divided into full squat group (SG, n = 12), combined full squat and change of direction exercises group (S+CDG, n = 12) and control group (CG, n = 10). The resistance training for SG consisted of full squat with low load (~45–58% 1RM) and low volume (4–6 repetitions), whereas the S+CDG performed the same resistance training program combined with loaded change of direction. Sprint time in 10 and 20 m, change of direction test, countermovement vertical jump (CMJ) height, maximal strength and force–velocity relationship in full squat exercise, kicking speed ball (BSmean) and repeated sprint ability (RSAmean) were selected as testing variables. Both experimental groups showed significant improvements for CMJ, BSmean and all strength parameters. Only SG resulted in significant sprint gains, whereas S+CDG also achieved significant improvements in RSAmean. The CG remained unchanged after training period. No significant differences were found between both experimental groups. These findings suggest that only 12 sessions of either lightweight resistance training alone, lifting the load at maximal intended velocity or combined with change of direction exercises is enough to improve several physical and skills capacities critical to futsal performance in adult players.  相似文献   

9.
ABSTRACT

This study compared the effects of dictating load using individual (ILVP) or group (GLVP) load-velocity profiles on lower-body strength and power. Nineteen trained males (23.6 ± 3.7 years) completed a back squat one-repetition maximum (1-RM), load-velocity profiling (LVP), and countermovement (CMJ), static-squat (SSJ) and standing-broad (SBJ) jump tests before and after 6 weeks of resistance training. Participants were randomly assigned to an ILVP, or GLVP intervention with intra-session load dictated through real-time velocity monitoring and prediction of current relative performance using either the participant’s LVP (ILVP) or a LVP based on all participant data (GLVP). Training resulted in significant increases in back squat 1-RM for the ILVP and GLVP group (p < 0.01; 9.7% and 7.2%, respectively), with no group-by-time interaction identified between training groups (p = 0.06). All jump performance significantly increased for the ILVP group (p < 0.01; CMJ: 6.6%; SSJ: 4.6%; SBJ: 6.7%), with only CMJ and SSJ improving for the GLVP group (p < 0.05; 4.3%). Despite no significant group-by-time interaction across all variables, the ILVP intervention induced a greater magnitude of adaptation when compared to a GLVP approach. Additionally, an individualised approach may lead to greater positive transfer to power-based movements, specifically vertical and horizontal jumps.  相似文献   

10.
This study examined the kinetic and temporal differences between countermovement jumps (CMJs) and eccentrically loaded CMJs. A survey of 109 coaches and athlete showed that 87% of respondents regularly used jumps with added mass within training. Sixteen male and thirteen female track and field athletes from sprinting, hurdling and jumping events performed 5 bodyweight CMJs 5 jumps wearing a weighted jacket and 5 eccentrically loaded dumbbell (LDB) jumps trials in a randomised order. Peak force (PF), peak power (PP), flight time (FT), concentric time (CON-T), eccentric time (ECT), total time (TIME) and eccentric/concentric ratio (E/C-Ratio) were obtained from force plate data. Statistically significant differences (p < 0.05) with moderate to large magnitude effect sizes were found between men and women in FT, PP and PF but not in any of the temporal variables. The results indicated that the WJ decreased FT in men (↓9%) and women (↓10%) but LDB jumps had similar FT to CMJ. Overall, the results showed that LDB increased the E/C Ratio (↑50% and ↑42%) and decreased CON-T (↓37% and ↓25%) compared with WJ and CMJ respectively. LDB jumping is not recommended as a training modality as it tends to disrupt the relative timing of the jump action.  相似文献   

11.
One variation of vertical jump (VJ) training is resisted or weighted jump training, where wearable resistance (WR) enables jumping to be overloaded in a movement specific manner. A two-way analysis of variance with Bonferroni post hoc contrasts was used to determine the acute changes in VJ performance with differing load magnitudes and load placements. Kinematic and kinetic data were quantified using a force plate and contact mat. Twenty sport active subjects (age: 27.8?±?3.8 years; body mass (BM): 70.2?±?12.2?kg; height: 1.74?±?0.78?m) volunteered to participate in the study. Subjects performed the counter movement jump (CMJ), drop jump (DJ) and pogo jump (PJ) wearing no resistance, 3% or 6% BM affixed to the upper or lower body. The main finding in terms of the landing phase was that the effect of WR was non-significant (P?>?.05) on peak ground reaction force. With regard to the propulsive phase the main findings were that for both the CMJ and DJ, WR resulted in a significant (P?<?.05) decrease in jump height (CMJ: ?12% to ?17%, DJ: ?10% to ?14%); relative peak power (CMJ: ?8% to ?17%, DJ: ?7% to ?10%); and peak velocity (CMJ: ?4% to ?7%, DJ: ?3% to ?8%); while PJ reactive strength index was significantly reduced (?15% to ?21%) with all WR conditions. Consideration should be given to the inclusion of WR in sports where VJ’s are important components as it may provide a novel movement specific training stimulus.

Highlights

  • WR of 3 or 6 % BM provided a means to overload the subjects in this study resulting in decreased propulsive power and velocity that lead to a reduced jump height and landing force.

  • Specific strength exercises that closely mimic sporting performance are more likely to optimise transference, therefore WR with light loads of 3–6% body mass (BM)appear a suitable tool for movement specific overload training and maximising transference to sporting performance.

  • Practitioners can safely load their athletes with upper or lower body WR of 3–6% BM without fear of overloading the athletesover and above the landing forces they are typically accustomed too.

  • As a training stimulus it would seem the WR loading provides adequate overload and athletes should focus on velocity of movement to improve power output and jump height i.e. take-off velocity.

  相似文献   

12.
This study investigated the validity and reliability of the GymAware PowerTool (GPT). Thirteen resistance trained participants completed three visits, consisting of three repetitions of free-weight back squat, bench press, deadlift (80% one repetition maximum), and countermovement jump. Bar displacement, peak and mean velocity, peak and mean force, and jump height were calculated using the GPT, a three-dimensional motion capture system (Motion Analysis Corporation; 150 Hz), and a force plate (Kistler; 1500 Hz). Least products regression were used to compare agreeability between devices. A within-trial one-way ANOVA, typical error (TE; %), and smallest worthwhile change (SWC) were used to assess reliability. Regression analysis resulted in R2 values of >0.85 for all variables excluding deadlift mean velocity (R2 = 0.54–0.69). Significant differences were observed between visits 3-2 for bench press bar displacement (0.395 ± 0.055 m; 0.383 ± 0.053 m), and deadlift bar displacement (0.557 ± 0.034 m; 0.568 ± 0.034 m). No other significant differences were found. Low to moderate TE (0.6–8.8%) were found for all variables, with SWC ranging 1.7–7.4%. The data provides evidence that the GPT can be used to measure kinetic and kinematic outputs, however, care should be taken when monitoring deadlift performance.  相似文献   

13.
The purpose of this investigation was to analyse the concurrent validity and reliability of an iPhone app (called: My Jump) for measuring vertical jump performance. Twenty recreationally active healthy men (age: 22.1 ± 3.6 years) completed five maximal countermovement jumps, which were evaluated using a force platform (time in the air method) and a specially designed iPhone app. My jump was developed to calculate the jump height from flight time using the high-speed video recording facility on the iPhone 5 s. Jump heights of the 100 jumps measured, for both devices, were compared using the intraclass correlation coefficient, Pearson product moment correlation coefficient (r), Cronbach’s alpha (α), coefficient of variation and Bland–Altman plots. There was almost perfect agreement between the force platform and My Jump for the countermovement jump height (intraclass correlation coefficient = 0.997, P < 0.001; Bland–Altman bias = 1.1 ± 0.5 cm, P < 0.001). In comparison with the force platform, My Jump showed good validity for the CMJ height (r = 0.995, P < 0.001). The results of the present study showed that CMJ height can be easily, accurately and reliably evaluated using a specially developed iPhone 5 s app.  相似文献   

14.
ABSTRACT

The aim of this investigation was to assess the reliability and validity of the Fitjump system. Fifty-seven participants (age = 22.62 ± 5.24 years, height = 180.69 ± 12.53 cm, body mass = 75.61 ± 9.56 kg) performed three countermovement jump (CMJ) and squat jump (SJ) with a 1-week interval for test and retest reliability. For validity, the participants performed the same jump protocol on the force platform while being simultaneously measured with the Fitjump system. There was excellent test–retest reliability of the Fitjump system for CMJ and SJ with high intraclass correlation coefficient (ICCs) (0.97 and 0.97, respectively), low coefficient variation (CVs) (2.3% and 2.4%, respectively), and low typical error of estimate [(TEE (%)] (4.0% and 4.4%, respectively). For validity, ICCs were extremely high for CMJ and SJ (0.93 and 0.94, respectively), with low TEE (%) (2.9% and 2.0%, respectively). However, Fitjump overestimated jump height for CMJ and SJ (3.54 and 3.37 cm, respectively; p < 0.001) when compared with the force platform. As a conclusion, the Fitjump system demonstrated excellent test–retest reliability and high relationship with a systematic bias for validity. Therefore, the Fitjump system can be used as a portable tool for monitoring vertical jump changes over time, but it should not be used interchangeably with a force platform.  相似文献   

15.
This study aimed to assess the validity and reliability of jump assessments using the MyJump2 application. Eleven junior athletes (15 ± 1.4 years) performed five countermovement (CMJ) and drop jumps (DJ) measured simultaneously by a force platform and MyJump2. Additionally, intra- and inter-day reliability was assessed over two sessions, 7 days apart. Extremely high agreement between MyJump2 and the force platform (intra-class correlation coefficient, ICC ≥ 0.99) and the intra- and inter-operator agreement (ICC = 0.98–0.99) confirmed the validity and reliability of MyJump2. Mean typical errors (coefficient of variation percentage, CV%) within the first and second sessions were 4.9% and 4.5% respectively for CMJs, and 8.0% to 11.8% for DJ outcomes. CMJ height held acceptable inter-day reliability (CV < 10%; ICC > 0.8), while DJ did not. Results supported MyJump2 to be a valid and reliable tool for assessing jumps; however, with variability in DJs in this cohort, appropriate caution should be taken if including in a junior assessment battery.  相似文献   

16.
ABSTRACT

Knee joint coordination during jump landing in different directions is an important consideration for injury prevention. The aim of the current study was to investigate knee and hip kinematics on the non-dominant and dominant limbs during landing. A total of 19 female volleyball athletes performed single-leg jump-landing tests in four directions; forward (0°), diagonal (30° and 60°) and lateral (90°) directions. Kinematic and ground reaction force data were collected using a 10-camera Vicon system and an AMTI force plate. Knee and hip joint angles, and knee angular velocities were calculated using a lower extremity model in Visual3D. A two factor repeated measures ANOVA was performed to explore limb dominance and jump direction. Significant differences were seen between the jump directions for; angular velocity at initial contact (p < 0.001), angular velocity at peak vertical ground reaction force (p < 0.001), and knee flexion excursion (p = 0.016). Knee coordination was observed to be poorer in the early phase of velocity-angle plot during landing in lateral direction compared to forward and diagonal directions. The non-dominant limb seemed to have better coordination than the dominant limb during multi-direction jump landing. Therefore, dominant limbs appear to be at a higher injury risk than non-dominant limbs.  相似文献   

17.
The purpose of this study was to determine the between day reliability of power-time measures calculated with data collected using the linear position transducer or the force plate independently, or a combination of the two technologies. Twenty-five male rugby union players performed three jump squats on two occasions one week apart. Ground reaction forces were measured via a force plate and position data were collected using a linear position transducer. From these data, a number of power-time variables were calculated for each method. The force plate, linear position transducer and a combined method were all found to be a reliable means of measuring peak power (ICC = 0.87‐0.95, CV = 3.4%‐8.0%). The absolute consistency of power-time measures varied between methods (CV = 8.0%‐53.4%). Relative consistency of power-time measures was generally comparable between methods and measures, and for many variables was at an acceptable level (ICC = 0.77‐0.94). Although a number of time-dependent power variables can be reliably calculated from data acquired from the three methods investigated, the reliability of a number of these measures is below that which is acceptable for use in research and for practical applications.  相似文献   

18.
ABSTRACT

The aim of this study was to investigate the differences and long-term reliability in perceptual, metabolic, and neuromuscular responses to velocity loss resistance training protocols. Using a repeated, counterbalanced, crossover design, twelve team-sport athletes completed 5-sets of barbell back-squats at a load corresponding to a mean concentric velocity of ~0.70 m·s?1. On different days, repetitions were performed until a 10%, 20% or 30% velocity loss was attained, with outcome measures collected after each set. Sessions were repeated after four-weeks. There were substantial between-protocol differences in post-set differential ratings of perceived exertion (dRPE, i.e., breathlessness and leg muscles, AU) and blood lactate concentration (B[La], mmol·L?1), such that 30%>20%>10% by small to large magnitudes. Differences in post-set countermovement jump (CMJ) variables were small for most variables, such that 30%<20%<10%. Standard deviations representing four-week variability of post-set responses to each protocol were: dRPE, 8–11; B[La], 0.8–1.0; CMJ height, 1.6–2.0; CMJ PPO, 1.0–1.8; CMJ PCV, 0.04–0.06; CMJ 100ms-Impulse, 5.7–11.9. Velocity loss thresholds control the magnitude of perceptual, metabolic, and neuromuscular responses to resistance training. For practitioners wanting to reliably prescribe training that can induce a given perceptual, metabolic, or neuromuscular response, it is strongly advised that velocity-based thresholds are implemented.  相似文献   

19.
ABSTRACT

This study aimed to analyze the acute effect of inter-repetition rest (IRR) intervals on mechanical and metabolic response during four resistance exercise protocols (REPs). Thirty resistance-trained men were randomly assigned to: continuous repetitions (CR), 10 s (IRR10) or 20 s (IRR20) inter-repetition rest. The REPs consisted of 3 sets of 6, 5, 4 and 3 repetitions against 60, 70, 75 and 80% 1RM, respectively, in the full squat exercise. Muscle fatigue was assessed using: percentage of velocity loss over three sets, percentage of velocity loss against the ~1 m·s?1 load (V1 m·s?1), and loss of countermovement jump (CMJ) height pre-post exercise. Blood lactate was measured before and after exercise. The percentage of velocity loss over three sets and lactate concentration were significantly lower (P < 0.05) for IRR groups compared to CR in all REPs. The CR group showed a significantly higher (P < 0.05) velocity loss against V1 m·s?1 load and loss of CMJ height pre-post exercise than IRR groups in REP against 60% 1RM. In conclusion, both IRR groups produced a significant lower degree of fatigue compared to CR group. However, no significant differences were found in any measured variables between IRR configurations.  相似文献   

20.
ABSTRACT

The aims of the present study were to provide an in-depth comparison of inter-limb asymmetry and determine how consistently asymmetry favours the same limb during different vertical jump tests. Eighteen elite female under-17 soccer players conducted unilateral squat jumps (SJ), countermovement jumps (CMJ) and drop jumps (DJ) on a portable force platform, with jump height, peak force, concentric impulse and peak power as common metrics across tests. For the magnitude of asymmetry, concentric impulse was significantly greater during the SJ test compared to CMJ (p = 0.019) and DJ (p = 0.003). No other significant differences in magnitude were present. For the direction of asymmetry, Kappa coefficients revealed fair to substantial levels of agreement between the SJ and CMJ (Kappa = 0.35 to 0.61) tests, but only slight to fair levels of agreement between the SJ and DJ (Kappa = ?0.26 to 0.18) and CMJ and DJ (Kappa = ?0.13 to 0.26) tests. These results highlight that the mean asymmetry value may be a poor indicator of true variability of between-limb differences in healthy athletes. The direction of asymmetry may provide a useful monitoring tool for practitioners in healthy athletes, when no obvious between-limb deficit exists.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号