首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 109 毫秒
1.
通过劈裂灌浆在蒲峪水库防渗工程中的应用,着重阐述了劈裂灌浆的参数选取、施工工艺流程及防渗效果分析,为水库防渗设计提供参考。  相似文献   

2.
介绍了土工合成材料的种类和功能,结合灌区渠道改造工程,对渠道防渗工程中冻胀破坏的防治措施、防渗材料的选择、施工方法和应用效果等有关问题加以讨论,可供类似工程参考。  相似文献   

3.
随着社会经济的快速发展,水利工程事业得到很大进步。水利工程建设是民生建设中的重要组成部分,所以必须保证水利工程质量。水利工程中渠道防渗措施的实施直接关系到水利工程的使用年限,也影响到工程的利用率。为了提高渠道工程的质量,需要深入研究渠道防渗技术,并根据实际的工程需要采取合适的防渗措施,做好渠道防渗施工管理工作。文章主要针对当前水利工程中渠道防渗技术的设计特点进行分析,希望能够进一步提高我国水利工程质量。  相似文献   

4.
水利水电枢纽工程的防渗施工可以采用多种方法,针对不同工程应具体问题具体分析,采用合适的防渗方法.在除险加固的同时坚固施工便捷高效、工程寿命长、成本低廉及水泥污染少等方面.  相似文献   

5.
结合汉口沿河堤防渗工程,对液压抓斗、深层搅拌和高压旋喷三种防渗墙施工工法在城区堤防防渗工程中的应用进行分析和评价。  相似文献   

6.
运用价值工程原理分析渠道防渗的经济效益   总被引:1,自引:0,他引:1  
从渠道防渗的价值工程功能分析人手,采用价值工程原理对渠道防渗的经济效益进行了分析,并通过实例予以说明。通过本文的论述可以看出,进行渠道防渗的经济效益分析,对科学用水、节约用水和扩大灌溉面积具有很大的作用,它是渠道设计中的一项非常重要的工作。  相似文献   

7.
结合威刀水库复合土工膜坝面防渗工程实际应用情况,复合土工膜防渗取得了良好经济效益和社会效益,本文论述复合土工膜在水库除险加固土坝防渗处理中,采用复合土工膜防渗处理,减少渗透量,防渗效果良好,具有推广价值。  相似文献   

8.
随着我国社会主义市场经济的飞速发展,小型水利水电枢纽工程的防渗技术也得到了应有的发展.本文着重对我国的小型水利水电枢纽工程的防渗技术的发展现状和其中存在的主要问题进行了相应的探讨.并对各种小型水利水电工程的防渗处理方式和方法进行了总结整理,对小型水利水电工程中存在的问题也提出了相应的改革方法和举措.  相似文献   

9.
本文通过董洼水库工程地质条件的分析,大坝采用多头小直径防渗墙垂直防渗措施,并结合工程竣工检测数据和运行效果,对董洼水库大坝防渗效果进行综合评价.  相似文献   

10.
本文通过一起工程实例,介绍了垃圾填埋场防渗工程的施工工艺。  相似文献   

11.
Low-density polyethylene ( LDPE) film andhigh-density polyethylene (HDPE) film are two typi-cal polyethylene films and widely used in electricaland electronic equipment, such as covering and corein ultra-high frequency cables[1—3]. It is well knownthat the unexpected defects in insulating polyethylenefilms under a high voltage will lead to the occurrenceof insulation degradation and act as the beginning ofinsulation breakdown. The insulation degradation ad-vances not only with the accumula…  相似文献   

12.
利用热重/差热同步测量仪在不同升温速率(5,10,20,30℃/min)和氮气气氛下对HDPE、LLDPE、LDPE的热分解行为进行研究。研究表明,三种聚乙烯的热分解只有一个分解过程,均为一级反应,热分解温度随升温速率β呈线性增加,并用Coats-Redfern、Kissinger及Ozawa法计算了HDPE、LLDPE、LDPE的热分解反应活化能E、反应级数n及频率因子A。  相似文献   

13.
通过反应挤出制备了高密度聚乙烯/聚酰胺6/蒙脱土(HDPE/PA 6/MMT)复合材料,研究了MMT在HDPE/PA 6共混物中的分散和分布情况,及其对共混物相态结构的影响。从XRD和TEM的结果中可以看出,有机化蒙脱土(OMMT)选择性地分布在PA 6相内以及两相的界面上,钠基蒙脱土(Na+MMT)则主要分布在PA 6相内;大部分OMMT得到较好的剥离或插层,而Na+MMT出现明显的团聚。FE-SEM分析结果表明,增大MMT的含量会导致PA 6的相态尺寸变大,粒径分布变宽。流变分析结果表明,由于OMMT部分分布于两相界面处,从而增强了界面结合,对共混物起到了增容作用。  相似文献   

14.
振动剪切作用下LDPE和HDPE熔体的非仿射网络结构模型   总被引:1,自引:0,他引:1  
We propose molten polymer‘s entanglement network deformation to be nonaffine and use transient network structural theory with the revised Liu‘s kinetics rate equation and the revised upper convected Maxwell constitutive equation to establish a nonaffine network Structural constitutive model for studying the rheological behavior of molten Low-Density Polyethylene(LDPE)and High Density Polyethylene(HDPE)in oscillatory shear.As a result,when the strain amplitude or frequency increases,the shear stress amplitude increases.At the same time,the accuracy of the nonaffine network model is higher than that of affine network model.It is clear that there is a small amount of nonaffine network deformation for LDPE melts which have long-chain branches,and there is a larger amount of nonaffine network deformation in oscillatory shear for HDPE melts which has no long-chain branches.So we had better consider the network deformation nonaffine when we establish the constitutive equations of polymer melts in oscillatory shear.  相似文献   

15.
According to the structural characteristics of hazardous waste landfill,a new model based on the finite element method(FEM)is developed.The detection layer is considered as a sealed space and it is assumed that total current flows through the leak for the high resistivity of geomembrane liner.The leak current is regarded as a positive point current I and the other current source is-I.Electrical potential of an arbitrary point in detection layer satisfies Poisson equation. Experiments for detecting leaks in liner were carried out.Excellent agreement between experimental data and simulated model data validates the new model.Parametric curves for a single leak show that with optimum selection of field survey parameters leaks can be detected effectively.For multiple leaks,the simulated results indicate that they are detectable when leak separation is larger than measurement spacing.  相似文献   

16.
To solve the disability of conventional model used in electrical leak location when measurement electrodes were buried under the liner, a new model of high voltage DC leak detection is developed. For single-liner landfill, the waste material layer, the geomembrane liner and the soil under the liner are simulated with infinite horizontal layers. The leak is regarded as two parts, one being negative current source at the entrance, and the other positive current source of the same size at the exit. Comparisons between the new theoretical model and conventional model show that conventional model is efficient in locating leaks in geomembane liner associating the dipole scanning above the liner but is ineffective when the measurement electrodes were buried under the liner. The new theoretical model data are in excellent agreement with experimental data not only above the liner but also under the liner.  相似文献   

17.
研究了包覆红磷以及Mg(OH)2对高密度聚乙烯(HDPE)的阻燃作用,考查了聚乙烯熔体粘度、包覆红磷、活性Mg(OH)2分别对HDPE阻燃性和力学性能的影响.发现包覆红磷和Mg(OH)2在阻燃体系中按2∶1的比例加入量16wt%时,体系阻燃性能最优;通过共混高流动性的LDPE共混体系的阻燃性和力学性能最好,所制备的材料适合挤出建筑阻燃穿线管的要求.  相似文献   

18.
研究了4种金属混合物样品对常见塑料的裂解性能,找到了一种活性良好的催化剂配方,该配方使塑料HDPE、PP、LDPE、PS的催化裂解具有较高的汽油选择性和油品收率;塑料PP、PS比PE更易裂解,所得油品中低沸物含量更高。  相似文献   

19.
利用废塑料热解-催化改质制备汽油的研究   总被引:4,自引:0,他引:4  
研究了几种改性HY分子筛对高密聚乙烯废塑料的热解-催化改质性能,讨论了催化剂的表面酸性与油品收率、组成的关系;比较了最优催化剂4#对LDPE、HDPE、PP、PS及混合塑料的改质效果;提出了利用废塑料制取高辛烷值汽油的有效方法.  相似文献   

20.
研究了4种金属混合物样品对常见塑料的裂解性能,找到了一种活性良好的催化剂配方.该配方使塑料HDPE、PP、LDPE、PS的催化裂解具有较高的汽油选择性和油品收率;塑料PP、PS比PE更易裂解,所得油品中低沸物合量更高.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号