共查询到20条相似文献,搜索用时 312 毫秒
1.
2.
随着半导体技术的发展,对半导体生产工艺的测量和评估的需求也在不断地提高。为此针对某半导体测量设备的实时测量需求,在Windows+RTX的平台下,设计并开发了具有强实时性的测量软件系统。系统的底层测量软件利用RTX提供的API和精确的时钟开发完成,其运行在RTX拓展系统中控制数据采集卡实时采集数据。上层用户界面使用MFC编制完成,并采用信号量机制与底层软件进行通信,通过共享内存传递测量数据。该软件系统开发完成后,部署在某测量设备上并进行实验,其实验数据表明该系统能很好地完成实时数据测量的任务。 相似文献
3.
本文介绍了虚拟仪器技术,并在LabVIEW虚拟仪器软件开发环境下,完成了以NI公司M系列数据采集(DAQ)卡PCI-6221为核心的数据采集系统的设计,实验证实了LabVIEW在数据采集应用中的优越性。 相似文献
4.
冷喷涂粒子参数采集系统实验平台实现了冷喷涂粒子速度参数检测。在此基础上通过LDI300硬件采集卡采集粒子飞行的电压参数,粒子电压参数作为冷喷涂粒子速度检测的实验数据。采集卡根据设定的每屏采样点数实时更新采集数据,实时快速存储数据到计算机磁盘文件中,这些工作用传统的I/O文件读取技术很难满足实时存储要求。研究了如何通过内存映射文件的方式将喷涂粒子电压参数实时存储到计算机磁盘文件中,以满足数据实时采集和存储的需要。实践证明:在粒子参数存储中,内存映射文件方法相对于传统I/O方法优势明显。 相似文献
5.
6.
7.
目的:在应用重物下落法制作脊髓损伤模型时,精确衡量不同打击高度下脊髓损伤模型的致伤程度。方法:设计出一套脊髓致伤力测量系统,使用PLC控制三维移动平台以调节打击高度和打击位置,在撞击锤头部安测力传感器,实现冲击力的实时测量。采用便携式差分USB示波器采集传感器输出的电压信号,并应用数据采集软件控制该采集装置,使其能够捕捉打击瞬时数据。结果:该脊髓致伤力测量系统能在不同打击高度下对脊髓进行打击,并实现冲击力的实时测量。结论:实验证明,系统能够制作不同损伤程度的脊髓损伤模型,并能实时显示冲击力波形,并计算打击过... 相似文献
8.
9.
为了提高温室作物的生长质量,提升农业生产的效率,设计并开发了基于ZigBee技术的多通道数据采集系统。该系统能够实时精确采集环境要素信息,通过ZigBee网络将这些数据发送给服务器存储、分析。通过对环境信息实时监测,从而采取恰当的处理措施。 相似文献
10.
11.
设计了一种采用虚拟仪器技术的某型导弹舵机传动机构性能测试系统。利用LabVIEW 2010作为系统开发平台,分析了PCI-6251数据采集卡组成的测控单元硬件组成,在此基础上设计了由M ES系统远程服务器数据库构成的测试系统软件。系统实现了数据采集、数据分析、数据存储和数据传输等功能。实际测试表明,此系统操作简单、界面友好、自动化程度较高,体现了测试系统的实用性。 相似文献
12.
介绍了基于虚拟仪器和热敏电阻的温度监测系统的设计,包括热敏电阻参数特性、测试系统组成,以及如何利用LabVIEW软件进行上位机的编程控制。从而实现了对温度数据及其波形的显示、越限报警等多种功能,并且操作简单、易于控制。 相似文献
13.
本次设计主要通过带有A/D、D/A功能的数据采集模块及外围的检测与执行元件,结合试验室所提供的过程控制对象,针对双层锅炉夹套水温为被控参数,设计研究锅炉温度控制系统,完成了系统的锅炉温度控制定值控制。 相似文献
14.
该软件是温室温度监测系统中的一部分,它接收由现场测温节点上传的数据,并将其处理后进行显示与存储,为管理人员提供温度监测信息。采用了先进ADO数据库引擎技术。该系统设计了实时监测模块、历史查询模块、参数设置模块等,实现了实时温度数据的表格显示、图形化显示以及历史数据的查询显示,同时能对下位机节点数等参数进行配置,实现温室温度监测的基本功能。 相似文献
15.
系统基于公交优先智能控制策略,采用内嵌ARM9内核的三星S3C2410处理器,整合了GPS(全球定位系统)、GPRS(通用无线分组业务)以及多数据流传感器,实现对公交车辆位置、温度、人数等数据的采集、传输及反馈,提高了公交系统调度效率和增强了安全性,实现了公交优先的智能控制。介绍了系统的构成,并给出软硬件的设计方案。 相似文献
16.
为有效地监控和管理煤矿安全,提高矿井安全生产监控技术,设计并开发了基于ZigBee协议的无线温度传感器网络。该网络由若干分站和探头组成。探头负责将温度传感器所采集到的信息反馈给分站,从而达到对一块区域进行温度监控的目的。实时监测矿工周围环境的温度,预防事故发生。本系统通过软件升级,可以实现人员定位监测,系统附加值高。 相似文献
17.
Drawing on Jones's ethical model and Ajzen's theory of planned behavior, this study proposes and tests an integrative model for the decision-making process underlying software piracy. Survey data collected from computer users in Guangzhou, China, in accordance with two software piracy scenarios under study—end user piracy and software counterfeiting—provide general support for the model. Consistent with major propositions of the theory of planned behavior, the findings show that Chinese computer users’ perceived moral intensity of software piracy significantly affects their corresponding moral recognition, judgment, and intention in both scenarios. Moreover, a direct influence of moral judgment on attitude toward software piracy is found in both scenarios. With regard to end-user piracy specifically, the findings further echo the theory of planned behavior by demonstrating a direct influence of attitude, subjective norm, and perceived behavioral control on intention to pirate. As in the case of software counterfeiting, the findings, however, show that only attitude and subjective norm but not perceived behavioral control significantly influence this intention. Implications derived from this study suggest the potential to synthesize ethical and general social psychological concepts to explain software piracy behavior, and also furnish insights on how to deter software piracy in China. 相似文献
18.
运用GEM模型理论建立了软件产业集群竞争力评价模型。并实地访谈软件产业集群研究专家、政府官员及企业家,利用调研结果和评价模型对西安软件产业集群竞争力进行了评估,并找出其发展中存在的问题。 相似文献
19.
基于嵌入式ARM技术实现按键键值的数据采集及LED点阵屏显示,并将采集到的数据通过串口送给上位机PC;另一方面接收上位机送来的数据,控制点亮相应的二极管且将接收到的数据显示在点阵LED屏上。系统硬件由LPC2220及其外围电路组成,采用了性能优良的ARM7处理器;软件在ADSl.2集成开发环境下应用C语言编程。系统工作稳定、可靠,在实际的工程应用设计中具有参考价值。 相似文献
20.
Luiz Antonio Joia José Carlos dos Santos Vinhais 《The Journal of High Technology Management Research》2017,28(2):261-272
This article seeks to analyse the migration trajectory from commercial off-the-shelf and closed source software to open source software in order to establish the critical success/resistance factors associated with the replacement of the extant Microsoft Office with Open Office software in a private Brazilian company. The bibliographical review of this work addresses adoption/resistance to information systems, which is the theoretical framework adopted to explain the data collected. The single case study method was then applied and data was collected via documentation analysis, interviews, questionnaires, and direct and participant observation. Data analysis was then conducted by means of content analysis and non-parametric statistics. Based on that, three types of user behaviour were identified with respect to the intention to use open source software, namely adopters, partial adopters, and non-adopters. Finally, the reasons for such behaviour were set forth and discussed in order to make the implications of the study clear. 相似文献