首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 312 毫秒
1.
Understanding the role of shaft stiffness in the golf swing   总被引：3，自引：3，他引：0  
Theoretically, shaft stiffness can alter shot distance by increasing clubhead speed or altering clubhead orientation at impact. A 3D forward dynamics model of a golfer and flexible club simulated the downswing. A genetic algorithm optimized the coordination of the model’s muscles (four torque generators) to maximize clubhead speed. The maximum torque output and maximum rate of torque development from the torque generators were varied to simulate the swing of golfers that generate different clubhead speeds. Four shafts of varying stiffness (flexible, regular, stiff, and completely rigid) were entered into these simulations to examine the role that shaft flexibility had on clubhead speed and orientation at impact. Shaft stiffness was found to have a meaningful effect only on clubhead orientation (dynamic loft and dynamic close) at impact. There was no evidence to support the premise that matching the stiffness properties of the shaft with the golfer would improve clubhead speed.  相似文献   

2.
The aim of this review was to determine how the findings of biomechanics and motor control/learning research may be used to improve golf performance. To be eligible, the biomechanics and motor learning studies had to use direct (ball displacement and shot accuracy) or indirect (clubhead velocity and clubface angle) golf performance outcome measures. Biomechanical studies suggested that reducing the radius path of the hands during the downswing, increasing wrist torque and/or range of motion, delaying wrist motion to late in the downswing, increasing downswing amplitude, improving sequential acceleration of body parts, improving weight transfer, and utilising X-factor stretch and physical conditioning programmes can improve clubhead velocity. Motor learning studies suggested that golf performance improved more when golfers focused on swing outcome or clubhead movement rather than specific body movements. A distributed practice approach involving multiple sessions per week of blocked, errorless practice may be best for improving putting accuracy of novice golfers, although variable practice may be better for skilled golfers. Video, verbal, or a combination of video and verbal feedback can increase mid-short iron distance in novice to mid-handicap (hcp) golfers. Coaches should not only continue to critique swing technique but also consider how the focus, structure, and types of feedback for practice may alter learning for different groups of golfers.  相似文献   

3.
The purpose of the present study was to analyse the variability in clubhead presentation to the ball and the resulting ball impact location on the club face for a range of golfers of different ability. A total of 285 male and female participants hit multiple shots using one of four proprietary drivers. Self-reported handicap was used to quantify a participant's golfing ability. A bespoke motion capture system and user-written algorithms was used to track the clubhead just before and at impact, measuring clubhead speed, clubhead orientation, and impact location. A Doppler radar was used to measure golf ball speed. Generally, golfers of higher skill (lower handicap) generated increased clubhead speed and increased efficiency (ratio of ball speed to clubhead speed). Non-parametric statistical tests showed that low-handicap golfers exhibit significantly lower variability from shot to shot in clubhead speed, efficiency, impact location, attack angle, club path, and face angle compared with high-handicap golfers.  相似文献   

4.
Understanding of the inter-joint coordination between rotational movement of each hip and trunk in golf would provide basic knowledge regarding how the neuromuscular system organises the related joints to perform a successful swing motion. In this study, we evaluated the inter-joint coordination characteristics between rotational movement of the hips and trunk during golf downswings. Twenty-one right-handed male professional golfers were recruited for this study. Infrared cameras were installed to capture the swing motion. The axial rotation angle, angular velocity and inter-joint coordination were calculated by the Euler angle, numerical difference method and continuous relative phase, respectively. A more typical inter-joint coordination demonstrated in the leading hip/trunk than trailing hip/trunk. Three coordination characteristics of the leading hip/trunk reported a significant relationship with clubhead speed at impact (r < ?0.5) in male professional golfers. The increased rotation difference between the leading hip and trunk in the overall downswing phase as well as the faster rotation of the leading hip compared to that of the trunk in the early downswing play important roles in increasing clubhead speed. These novel inter-joint coordination strategies have the great potential to use a biomechanical guideline to improve the golf swing performance of unskilled golfers.  相似文献   

5.
Previously, forward dynamic models of the golf swing have been planar, two-dimensional (2D) representations. Research on live golfers has consistently demonstrated that the downswing is not planar. This paper introduces and evaluates the validity of a 3D six-segment forward dynamics model of a golfer. The model incorporates a flexible club shaft and a variable swing plane. A genetic algorithm was developed to optimise the coordination of the model’s mathematically represented muscles (torque generators) in order to maximise clubhead speed at impact. The kinematic and kinetic results confirmed previous findings on the proximal to distal sequencing of joints and the muscles powering those joints. The validity of the mathematical model was supported through comparisons of the model’s swing kinematics and kinetics with those of a live golfer.  相似文献   

6.
The purpose of this study was to assess the validity of the X-factor computation methods and to examine whether direct relationships exist between the X-factor parameters and the clubhead velocity in a group of skilled male golfers (n = 18, handicap = ? 0.6 ± 2.1). Five driver trials were captured from each golfer using an optical motion capture system (250 Hz). Two plane-based methods (conventional vs. functional swing plane-based) and one Cardan rotation-based method (relative orientation) were used to compute select X-factor (end of pelvis rotation, top of backswing, ball impact (BI), and maximum), X-factor stretch (stretch and maximum stretch), and X-factor velocity (BI and maximum) parameters. The maximum clubhead velocity was extracted and normalized to golfer's body height to eliminate the effect of body size. A one-way repeated MANOVA revealed that the computation methods generated significantly different X-factor parameter values (p < 0.001). The conventional method provided substantially larger X-factor values than the other methods in the untwisting phase and the meaningfulness of select X-factor parameters generated by this method was deemed questionable. The correlation analysis revealed that the X-factor parameters were not directly related to the maximum clubhead velocity (both unnormalized and normalized).  相似文献   

7.
The purposes of this study were to characterise the golfer–ground interactions during the swing and to identify meaningful associations between the golfer–ground interaction force/moment parameters and the maximum clubhead speed in 63 highly skilled male golfers (handicap ≤ 3). Golfers performed shots in 3 club conditions (driver, 5-iron and pitching wedge) which were captured by an optical motion capture system and 2 force plates. In addition to the ground reaction forces (GRFs), 3 different golfer–ground interaction moments (GRF moments, pivoting moments and foot contact moments) were computed. The GRF moment about the forward/backward (F/B) axis and the pivoting moment about the vertical axis were identified as the primary moments. Significant (p < 0.05) correlations of peak force parameters (all components in the lead foot and F/B component in the trail foot) and peak moment parameters (lead-foot GRF moment and trail-foot pivoting moment) to clubhead speed were found. The lead-foot was responsible for generating the GRF moment, while the trail foot contributed to the pivoting moment more. The instant the lead arm becomes parallel to the ground was identified as the point of maximum angular effort, and the loading onto the lead-foot near this point was critical in generating both peak moments.  相似文献   

8.
Previous research indicates that the motion of the golf club is not planar and that the plane traced out by the club is different than that of the golfer's hands. The aim of the present study was to investigate how the position of the club, relative to the golfer's swing plane, influences the motion of the club by using a four-segment (torso, upper arm, forearm, and club), three-dimensional forward dynamics model. A genetic algorithm optimized the coordination of the model's four muscular torque generators to produce the best golf swings possible under six different conditions. The series of simulations were designed to demonstrate the effect of positioning the club above, and below, the golfer's swing plane as well as the effect of changing the steepness of the golfer's swing plane. The simulation results suggest that positioning the club below the golfer's swing plane, early in the downswing, will facilitate the squaring of the clubface for impact, while positioning the club above the plane will have the opposite effect. It was also demonstrated that changing the steepness of the golfer's swing plane by 10 degrees can have little effect on the delivery of the clubhead to the ball.  相似文献   

9.
The golfer’s body (trunk/arms/club) can be modeled as an inclined axle-chain system and the rotations of its parts observed on the functional swing plane (FSP) can represent the actual angular motions closely. The purpose of this study was to investigate the effects of pelvis-shoulders torsional separation style on the kinematic sequences employed by the axle-chain system in golf driving. Seventy-four male skilled golfers (handicap ≤ 3) were assigned to five groups based on their shoulder girdle motion and X-factor stretch characteristics: Late Shoulder Acceleration, Large Downswing Stretch, Large Backswing Stretch, Medium Total Stretch, and Small Total Stretch. Swing trials were captured by an optical system and the hip-line, thorax, shoulder-line, upper-lever, club, and wrist angular positions/velocities were calculated on the FSP. Kinematic sequences were established based on the timings of the peak angular velocities (backswing and downswing sequences) and the backswing-to-downswing transition time points (transition sequence). The backswing and transition sequences were somewhat consistent across the groups, showing full or partial proximal-to-distal sequences with minor variations. The downswing sequence was inconsistent across the groups and the angular velocity peaks of the body segments were not significantly separated. Various swing characteristics associated with the separation styles influenced the motion sequences.  相似文献   

10.
The trajectory of the clubhead close to ball impact during the golf swing has previously been shown to be planar. However, the relationship between the plane orientation and the orientation characteristics of the clubhead at ball impact has yet to be defined. Fifty-two male golfers (27 high skilled, 25 intermediate skilled) hit 40 drives each in an indoor biomechanics laboratory. This study successfully fitted the trajectory of the clubhead near impact to an ellipse for each swing for players of different skill levels to help better explain this relationship. Additionally, the eccentricities of the ellipses were investigated for links to skill level. The trajectory of the clubhead was found to fit to an ellipse with RMSE of 1.2 mm. The eccentricity of the ellipse was found to be greater in the high-skilled golfers. The club path and angle of attack generated from the ellipse fitted clubhead trajectory were found to have a normalised bias-corrected RMSE of 2% and 3%, respectively. A set of “rule of thumb” values for the relationship between the club path, angle of attack and delivery plane angle was generated for use by coaches.  相似文献   

11.
Most previous research on golf swing mechanics has focused on the driver club. The aim of this study was to identify the kinematic factors that contribute to greater hitting distance when using the 5 iron club. Three-dimensional marker coordinate data were collected (250 Hz) to calculate joint kinematics at eight key swing events, while a swing analyser measured club swing and ball launch characteristics. Thirty male participants were assigned to one of two groups, based on their ball launch speed (high: 52.9 ± 2.1 m · s(-1); low: 39.9 ± 5.2 m · s(-1)). Statistical analyses were used to identify variables that differed significantly between the two groups. Results showed significant differences were evident between the two groups for club face impact point and a number of joint angles and angular velocities, with greater shoulder flexion and less left shoulder internal rotation in the backswing, greater extension angular velocity in both shoulders at early downswing, greater left shoulder adduction angular velocity at ball contact, greater hip joint movement and X Factor angle during the downswing, and greater left elbow extension early in the downswing appearing to contribute to greater hitting distance with the 5 iron club.  相似文献   

12.
An understanding of shaft dynamics during the golf swing was gained through a series of theoretical simulations, using a 3D forward dynamics model. By resolving the resultant force applied at the grip end of the club into a tangential and a radial (centripetal) component, the mechanisms of shaft deflection were quantified. It was determined that radial force plays an important role in producing the toe-down and lead-deflections recorded in all golf swings made with a driver. However, the simulations also revealed that the recoil of the shaft, from its previously toe-up and lag deflected position during the downswing (due to tangential forces), plays at least an equally important role in determining the position and orientation of the clubhead at impact. It was further demonstrated that, due to the influence of the radial force component, maximum kick velocity is reached after the clubhead has passed beyond the neutral shaft position.  相似文献   

13.
The aims of this study were (i) to determine whether significant three-dimensional (3D) trunk kinematic differences existed between a driver and a five-iron during a golf swing; and (ii) to determine the anthropometric, physiological, and trunk kinematic variables associated with clubhead speed. Trunk range of motion and golf swing kinematic data were collected from 15 low-handicap male golfers (handicap = 2.5 ± 1.9). Data were collected using a 10-camera motion capture system operating at 250 Hz. Data on clubhead speed and ball velocity were collected using a real-time launch monitor. Paired t-tests revealed nine significant (p ≤ 0.0019) between-club differences for golf swing kinematics, namely trunk and lower trunk flexion/extension and lower trunk axial rotation. Multiple regression analyses explained 33.7–66.7% of the variance in clubhead speed for the driver and five-iron, respectively, with both trunk and lower trunk variables showing associations with clubhead speed. Future studies should consider the role of the upper limbs and modifiable features of the golf club in developing clubhead speed for the driver in particular.  相似文献   

14.
It is believed that increasing the X-factor (movement of the shoulders relative to the hips) during the golf swing can increase ball velocity at impact. Increasing the X-factor may also increase the risk of low back pain. The aim of this study was to provide recommendations for the three-dimensional (3D) measurement of the X-factor and lower trunk movement during the golf swing. This three-part validation study involved; (1) developing and validating models and related algorithms (2) comparing 3D data obtained during static positions representative of the golf swing to visual estimates and (3) comparing 3D data obtained during dynamic golf swings to images gained from high-speed video. Of particular interest were issues related to sequence dependency. After models and algorithms were validated, results from parts two and three of the study supported the conclusion that a lateral bending/flexion-extension/axial rotation (ZYX) order of rotation was deemed to be the most suitable Cardanic sequence to use in the assessment of the X-factor and lower trunk movement in the golf swing. The findings of this study have relevance for further research examining the X-factor its relationship to club head speed and lower trunk movement and low back pain in golf.  相似文献   

15.
It is believed that increasing the X-factor (movement of the shoulders relative to the hips) during the golf swing can increase ball velocity at impact. Increasing the X-factor may also increase the risk of low back pain. The aim of this study was to provide recommendations for the three-dimensional (3D) measurement of the X-factor and lower trunk movement during the golf swing. This three-part validation study involved; (1) developing and validating models and related algorithms (2) comparing 3D data obtained during static positions representative of the golf swing to visual estimates and (3) comparing 3D data obtained during dynamic golf swings to images gained from high-speed video. Of particular interest were issues related to sequence dependency. After models and algorithms were validated, results from parts two and three of the study supported the conclusion that a lateral bending/flexion-extension/axial rotation (ZYX) order of rotation was deemed to be the most suitable Cardanic sequence to use in the assessment of the X-factor and lower trunk movement in the golf swing. The findings of this study have relevance for further research examining the X-factor its relationship to club head speed and lower trunk movement and low back pain in golf.  相似文献   

16.
The aim of this study was to describe and compare the EMG patterns of select lower limb muscles throughout the golf swing, performed with three different clubs, in non-elite middle-aged players. Fourteen golfers performed eight swings each using, in random order, a pitching wedge, 7-iron and 4-iron. Surface electromyography (EMG) was recorded bilaterally from lower limb muscles: tibialis anterior, peroneus longus, gastrocnemius medialis, gastrocnemius lateralis, biceps femoris, semitendinosus, gluteus maximus, vastus medialis, rectus femoris and vastus lateralis. Three-dimensional high-speed video analysis was used to determine the golf swing phases. Results showed that, in average handicap golfers, the highest muscle activation levels occurred during the Forward Swing Phase, with the right semitendinosus and the right biceps femoris muscles producing the highest mean activation levels relative to maximal electromyography (70–76% and 68–73% EMGMAX, respectively). Significant differences between the pitching wedge and the 4-iron club were found in the activation level of the left semitendinosus, right tibialis anterior, right peroneus longus, right vastus medialis, right rectus femuris and right gastrocnemius muscles. The lower limb muscles showed, in most cases and phases, higher mean values of activation on electromyography when golfers performed shots with a 4-iron club.  相似文献   

17.
Abstract

When using a driver, the centre of pressure of a golfer shows a pattern that is characteristic of one of two distinct swing styles: the “front foot” style or the “reverse” style. The aim of this study was to establish whether these two swing styles are also evident when using other clubs, and if so, to determine whether golfers use the same swing style when using different clubs. Forty-six professional, amateur, and recreational golfers performed swings to hit a ball into a net placed 3 m away. Ten swings were performed for each of the driver, 3-iron, and 7-iron while standing on two force plates. The position of the golfer's centre of pressure parallel with the line of shot and relative to the feet was quantified at eight swing events that were identified from 200-Hz video. Cluster analysis confirmed that the front foot and reverse styles were evident in all three clubs, and most of the golfers (96%) used the same swing style for all three clubs. Golfers that used the reverse swing positioned their centre of pressure nearer to their toes at ball contact compared with golfers that used the front foot swing.  相似文献   

18.
The golf swing has been modelled as a planar movement, but recent findings suggest that the upper limbs and golf club do not move in a single plane. However, the idea that the club alone can be swung in a single inclined plane has not been investigated mathematically. The aims of this study were to determine whether a single plane could be fitted to club motion, and if this plane varied for different clubs. Ten golfers (handicap 1-5) performed repeated, consistent swings with three clubs (driver, 5-iron, and pitching wedge). The motion of each club during the downswing was fitted to a single plane. The fit of the plane varied between golfers and clubs (r(2) = 0.871-0.995, root mean square residual = 44.9-166.2 mm). Mean angles of the plane to the reference horizontal Z axis (driver: 125.5 degrees , s = 3.0; 5-iron: 117.1 degrees , s = 3.0; wedge: 113.6 degrees , s = 2.7) and target line axis (driver: -7.8 degrees , s = 5.9; 5-iron: -4.9 degrees , s = 5.7; wedge: -5.9 degrees , s = 6.0) were significantly (P < 0.05) different. Further analysis revealed a single plane was more appropriate for some participants than others, but that it might be neither desirable nor possible in some cases.  相似文献   

19.
The purpose of this study was to evaluate possible effects of synchronized metronome training (SMT) on movement dynamics during golf-swing performance, as captured by kinematic analysis. A one-group, between-test design was applied on 13 male golfers (27.5 ± 4.6 years old, 12.7 ± 4.9 handicap) who completed 12 sessions of SMT over a four-week period. Pre- and post-assessments of golf swings with three different clubs (4-iron, 7-iron, and pitching wedge) were performed using a three-dimensional motion capture system. Club velocity at three different swing phases (backswing, downswing, and follow-through) was measured and cross-correlation analysis of time-series signals were made on joint couplings (wrist–elbow–shoulder) of both arms, and between joints and the club, during the full golf swing. There were significantly higher cross-correlations between joint-couplings and concomitant changes of the associated phase-shift differences, as well as reduced phase-shift variability at post-test. No significant effect of SMT was found for the club velocities. We suggest that domain-general influences of SMT on the underlying brain-based motor control strategies lead to a more coordinated movement pattern of the golf-swing performance, which may explain previous observations of significantly improved golf-shot accuracy and decreased variability after SMT.  相似文献   

20.
Abstract

Although the golf coaching literature stresses the importance of weight transfer during the swing, research has been conflicting or lacking statistical support. A potential problem with previous studies is that no attempt was made to account for different movement strategies in the golf swing. This study evaluated the relationship between centre of pressure measures and club head velocity within two previously identified swing styles, the “Front Foot” and “Reverse” styles. Thirty-nine Front Foot golfers and 19 Reverse golfers performed swings with a driver while standing on two force plates. From the force plate data, centre of pressure displacement, velocity, range, and timing parameters were calculated. Correlation and regression analysis indicated that a larger range of centre of pressure and a more rapid centre of pressure movement in the downswing was associated with a larger club head velocity at ball contact for the Front Foot group. For the Reverse golfers, positioning the centre of pressure further from the back foot at late backswing and a more rapid centre of pressure transfer towards the back foot at ball contact was associated with a larger club head velocity at ball contact. This study has highlighted the importance of identifying different movement strategies before evaluating performance measures, as different parameters were found to be important for the Front Foot and Reverse styles.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号