首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
ABSTRACT

This study examined the effects of shoe collar-height and counter-stiffness on ground reaction force (GRF), ankle and knee mechanics in landing. Eighteen university basketball players performed drop landing when wearing shoes in different collar height (high vs. low) and counter-stiffness (stiffer vs. less stiff). Biomechanical variables were measured with force platform and motion capturing systems. Two-way repeated measures ANOVA was performed with α = 0.05. Wearing high collar shoes exhibited smaller peak ankle dorsiflexion and total sagittal RoM, peak knee extension moment, but larger peak knee varus moment than the low collar shoes. Stiffer counter-stiffness shoes related to smaller ankle inversion at touchdown and total coronal RoM, but larger peak knee flexion and increased total ankle and knee sagittal RoM than the less stiff counter-stiffness. Furthermore, wearing stiffer counter-stiffness shoes increased forefoot GRF peak at high collar condition, while no significant differences between counter-stiffness at low collar condition. These results suggest that although higher collar height and/or stiffness heel counter used can reduce ankle motion in coronal plane, it would increase the motion and loading at knee joint, which is susceptible to knee injuries. These findings could be insightful for training and footwear development in basketball.  相似文献   

2.
目的:探讨高、低帮篮球鞋对落地时踝关节内翻的运动学、地面反作用力及下肢主要肌群活动的影响,尝试理解高、低帮篮球鞋与踝关节落地稳定之间的关系;方法:13名受试者分别穿着高、低帮篮球鞋,手抓杠悬于空中,从40 cm高度分别垂直下落至内翻15°、内翻30°、内翻25°伴随跖屈10°(25°+10°)、内翻25°伴随跖屈20°(25°+20°)的倾斜面上,分析其踝关节运动学、地面反作用力及小腿主要外翻和背屈肌群(胫骨前肌、腓骨长肌和腓骨短肌)的肌电活动;结果:高、低帮鞋对内翻角度的变化、最大内翻角速度和地面垂直及水平冲击力没有显著影响;在15°倾斜面时,穿着高帮鞋出现预激活时间比低帮鞋晚(P<0.05),同时,在15°和25°+20°下腓骨长肌和腓骨短肌落地前50 ms的平均振幅更小(P<0.05);结论:选取的高帮鞋对踝关节的运动学和冲击力的改变不显著,但却在一定程度上影响了周围肌肉的预激活,对限制踝关节活动起到了积极的作用.  相似文献   

3.
Abstract

Lateral ankle sprains (LAS) are one of the most common musculoskeletal injuries and as a response, clinicians often use external ankle taping prophylactically to reduce the prevalence of injuries. External ankle taping techniques have been shown to significantly reduce passive ankle range of motion; however, there is limited research on the effects of external ankle taping on lower extremity kinematics or kinetics during sport specific tasks. Therefore, our objective was to compare the effects of external ankle taping on ankle, knee and hip kinematics and kinetics compared to no taping during an anticipated sidestep cutting task and a straight sprint task. We conducted a cross-over laboratory study with 16 healthy males. Three-dimensional kinematics and kinetics were collected with a motion capture system and in-ground force plate during 5 trials of a sprint and anticipated side-step cut with or without external ankle taping. Group means and associated 90% confidence intervals were plotted across 100 data points for each task, significance being identified when the confidence intervals did not overlap for three consecutive data points. No significant kinetic or kinematic differences were identified between conditions for the tasks. External ankle taping does not influence lower extremity biomechanics during a control cutting task.  相似文献   

4.
Abstract

This study investigates the effect of running shoes’ aging on mechanical and biomechanical parameters as a function of midsole materials (viscous, intermediate, elastic) and ground inclination. To this aim, heel area of the shoe (under calcaneal tuberosity) was first mechanically aged at realistic frequency and impact magnitudes based on a 660 km training plan. Stiffness (ST) and viscosity were then measured on both aged and matching new shoes, and repercussions on biomechanical variables (joint kinematics, muscular pre-activation, vertical ground reaction force and tibial acceleration) were assessed during a leg-extended stepping-down task designed to mimic the characteristics of running impacts. Shoes’ aging led to increased ST (means: from 127 to 154 N ? mm?1) and decreased energy dissipation (viscosity) (means: from 2.19 to 1.88 J). The effects induced by mechanical changes on body kinematics were very small. However, they led with the elastic shoe to increased vastus lateralis pre-activation, tibial acceleration peak (means: from 4.5 g to 5.2 g) and rate. Among the three shoes tested, the shoe with intermediate midsole foam provided the best compromise between viscosity and elasticity. The optimum balance remains to be found for the design of shoes regarding at once cushioning, durability and injury prevention.  相似文献   

5.
This study investigated whether male runners improve running performance, running economy, ankle plantar flexor strength, and alter running biomechanics and lower limb bone mineral density when gradually transitioning to using minimalist shoes for 100% of weekly running. The study was a planned follow-up of runners (n?=?50) who transitioned to minimalist or conventional shoes for 35% of weekly structured training in a previous 6-week randomised controlled trial. In that trial, running performance and economy improved more with minimalist shoes than conventional shoes. Runners in each group were instructed to continue running in their allocated shoe during their own preferred training programme for a further 20 weeks while increasing allocated shoe use to 100% of weekly training. At the 20-week follow-up, minimalist shoes did not affect performance (effect size: 0.19; p?=?0.218), running economy (effect size: ≤?0.24; p?≥?0.388), stride rate or length (effect size: ≤?0.12; p?≥?0.550), foot strike (effect size: ≤?0.25; p?≥?0.366), or bone mineral density (effect size: ≤?0.40; p?≥?0.319). Minimalist shoes increased plantar flexor strength more than conventional shoes when runners trained with greater mean weekly training distances (shoe*distance interaction: p?=?0.036). After greater improvements with minimalist shoes during the initial six weeks of a structured training programme, increasing minimalist shoe use from 35% to 100% over 20 weeks, when runners use their own preferred training programme, did not further improve performance, running economy or alter running biomechanics and lower limb bone mineral density. Minimalist shoes improved plantar flexor strength more than conventional shoes in runners with greater weekly training distances.  相似文献   

6.
This study investigated the immediate effects of reducing the shoe drop (i.e. the difference between the heel and the forefoot height) on the kinematics and kinetics of the lower extremities of children tennis players performing a tennis-specific movement. Thirteen children tennis players performed a series of simulated open stance forehands wearing 3 pairs of shoes differing only in the drop: 0 (D0), 6 (D6) and the control condition of 12?mm (D12). Two embedded forceplates and a motion capture system were used to analyse the ground reaction forces and ankle and knee joint angles and moments of the leading lower limb. In D6 compared with D12, the peak impact force was reduced by 24% (p?=?.004) and the ankle was less dorsiflexed at foot strike (p?=?.037). In D0 compared with D12, the peak impact force was reduced by 17% (p?=?.049), the ankle was less dorsiflexed at foot strike (p?=?.045) and the knee was more flexed at foot strike (p?=?.007). In addition, 4 out of 13 participants (31%) presented a forefoot strike pattern for some of the trials in D0. No difference was observed across shoe conditions for the peak knee extensor moment (p?=?.658) or the peak ankle plantarflexor moment (p?=?.071). The results provide preliminary data supporting the hypothesis that for children tennis players, using a 6-mm lower shoe drop might reduce heel impact forces and thus limit potentially impact-related injuries.  相似文献   

7.
ABSTRACT

This study examined potential differences between maximally cushioned (MAX) shoes and standard cushioned (STND) shoes during countermovement vertical jump (CMVJ) performance. Twenty-one males (23[2] y; 86.5[15.4] kg; 179.8[6.3] cm) completed eight jumps each in MAX and STND shoes while three-dimensional kinematic and kinetic data were collected. Paired-samples t-tests (α = 0.05) and Cohen’s d effect sizes (ES) were used to compare the following variables: vertical jump displacement, jump time, hip, knee and ankle joint angles at the start of the countermovement, the end of the unloading phase, the end of the eccentric phase, and at takeoff, peak joint power, and the joint contributions to total lower extremity work during the eccentric and concentric phases. The ankle was more dorsiflexed at the end of the countermovement in the MAX shoe (p = 0.002; ES = 0.55) but greater plantarflexion occurred in the STND shoes at takeoff (p = 0.028; ES = 0.56). No other differences were observed. The result of this study suggests that unique ankle joint angular positioning may be employed when wearing MAX versus STND shoes. Since the unique ankle joint positioning did not alter jump performance, potential MAX footwear users might not need to consider the potential for altered CMVJ performance when determining whether to adopt MAX footwear.  相似文献   

8.
One prominent pattern emerging from a review of the literature on sport shoes and biomechanics is the observation that many effects are the indirect result of shoe‐induced adjustments in movement, i.e. a particular shoe characteristic elicits a kinematic adaptation which in turn has secondary consequences on kinetics and on injury and performance. For example, in addition to its variable effects on peak forces, cushioning system design has been shown to alter electromyographic patterns and to affect knee flexion during foot strike and affect indirectly the economy of running. Mediolateral stability as measured by rearfoot kinematics is strongly influenced by shoe design features such as heel lift, and sole hardness and geometry. The frictional properties of the shoe and surface interface have also been shown to affect kinematics in a way that in turn affects the recorded frictional forces themselves. Such kinematically mediated responses are the most provocative result of studies of the biomechanical effects of footwear. It is becoming apparent that the shoe can be a powerful tool for manipulating human movement. The abundance of shoe design possibilities coupled with the body's tendency to adjust in predictable ways to shoe mechanical characteristics have given us a new way to manipulate human kinematics and kinetics, as well as a convenient model for studying biomechanical adaptation.  相似文献   

9.
Abstract

Numerous studies have investigated anterior cruciate ligament (ACL) injury risk by examining gender differences in knee and hip biomechanics during a side-step cutting manoeuvre since it is known that ACL injury often occurs during such a task. Recent investigations have also examined lower extremity (LE) biomechanics during side-step cutting in individuals following ACL reconstruction (ACLR). Common research practice is to compare knee and hip biomechanics of the dominant limb between groups but this can add considerable complexity for clinicians and researchers. At this time, it is not known if there is a difference in LE biomechanics between the dominant and non-dominant limb during side-step cutting. Three-dimensional kinematics and kinetics were collected while 31 healthy participants performed five, side-step cutting manoeuvres with the dominant and non-dominant limbs. Knee and hip variables examined are those commonly investigated in ACL injury literature. There were no differences between limbs in all but one variable (knee internal rotation). These results demonstrate that healthy individuals exhibit little side-to-side differences in certain LE biomechanics when performing a side-step cutting manoeuvre. These findings can be utilised by clinicians when conducting dynamic evaluations of their ACLR patients and when developing injury prevention and rehabilitation programmes.  相似文献   

10.
Kinematically mediated effects of sport shoe design: a review   总被引：1，自引：0，他引：1  
One prominent pattern emerging from a review of the literature on sport shoes and biomechanics is the observation that many effects are the indirect result of shoe-induced adjustments in movement, i.e. a particular shoe characteristic elicits a kinematic adaptation which in turn has secondary consequences on kinetics and on injury and performance. For example, in addition to its variable effects on peak forces, cushioning system design has been shown to alter electromyographic patterns and to affect knee flexion during foot strike and affect indirectly the economy of running. Mediolateral stability as measured by rearfoot kinematics is strongly influenced by shoe design features such as heel lift, and sole hardness and geometry. The frictional properties of the shoe and surface interface have also been shown to affect kinematics in a way that in turn affects the recorded frictional forces themselves. Such kinematically mediated responses are the most provocative result of studies of the biomechanical effects of footwear. It is becoming apparent that the shoe can be a powerful tool for manipulating human movement. The abundance of shoe design possibilities coupled with the body's tendency to adjust in predictable ways to shoe mechanical characteristics have given us a new way to manipulate human kinematics and kinetics, as well as a convenient model for studying biomechanical adaptation.  相似文献   

11.
Despite the growing interest in minimalist shoes, no studies have compared the efficacy of different types of minimalist shoe models in reproducing barefoot running patterns and in eliciting biomechanical changes that make them differ from standard cushioned running shoes. The aim of this study was to investigate the acute effects of different footwear models, marketed as “minimalist” by their manufacturer, on running biomechanics. Six running shoes marketed as barefoot/minimalist models, a standard cushioned shoe and the barefoot condition were tested. Foot–/shoe–ground pressure and three-dimensional lower limb kinematics were measured in experienced rearfoot strike runners while they were running at 3.33 m · s?1 on an instrumented treadmill. Physical and mechanical characteristics of shoes (mass, heel and forefoot sole thickness, shock absorption and flexibility) were measured with laboratory tests. There were significant changes in foot strike pattern (described by the strike index and foot contact angle) and spatio-temporal stride characteristics, whereas only some among the other selected kinematic parameters (i.e. knee angles and hip vertical displacement) changed accordingly. Different types of minimalist footwear models induced different changes. It appears that minimalist footwear with lower heel heights and minimal shock absorption is more effective in replicating barefoot running.  相似文献   

12.
ABSTRACT

This study examined the effect of wearing time on comfort perception and landing biomechanics of basketball shoes with different midsole hardness. Fifteen basketball players performed drop landing and layup first step while wearing shoes of different wearing time (new, 2-, 4-, 6- and 8-week) and hardness (soft, medium and hard). Two-way ANOVA with repeated measures was performed on GRF, ankle kinematic and comfort perception variables. Increased wearing time was associated with poorer force attenuation and comfort perception during landing activities (p < 0.05). The new shoes had significantly smaller forefoot (2- and 4-week) and rearfoot peak GRF impacts (all time conditions) in drop landing and smaller rearfoot peak GRF impact (6- and 8-week) in layup; shoes with 4-week of wearing time had significantly better perceptions of forefoot cushioning, forefoot stability, rearfoot cushioning, rearfoot stability and overall comfort than the new shoes (p < 0.05). Compared with hard shoes, the soft shoes had better rearfoot cushioning but poorer forefoot cushioning (p < 0.05). Shoe hardness and wearing time would play an influential role in GRF and comfort perception, but not in ankle kinematics. Although shoe cushioning performance would decrease even after a short wearing period, the best comfort perception was found at 4-week wearing time.  相似文献   

13.
Abstract

Running shoe construction influences the forces experienced by the human body while running. The aim of this study was to ascertain whether the new sole architecture of the On running shoe reduces ground reaction forces compared with running barefoot or with a conventional running shoe and whether it changes the physiological parameters of running in shoes. Thirty-seven trained male participants were studied while running at submaximal speeds wearing their conventional running shoe, wearing the On running shoe and while barefoot. Additional biomechanical and physiological values were investigated to determine whether the On running shoe induced any changes in these parameters compared with conventional running shoes. The On exhibited similar ground reaction forces as conventional shoes, and these were different from the forces experienced while running barefoot, showing that the On was more similar to typical shoed running. No difference was observed in running economy between the On and a conventional shoe model. However, a slightly lower heart rate (HR) (≈1.3%) and blood lactate concentration (≈5.5%) were observed during submaximal running with the On running shoe compared with a conventional running shoe, as well as a greater lateral deviation of the centre of pressure mid-stance. The ramifications of the reduced HR and blood lactate concentration for competitive performance are unknown.  相似文献   

14.
The purposes of this investigation were to determine if increasing the bending stiffness of sprint shoes increases sprinting performance and to determine whether simple anthropometric factors can be used to predict shoe bending stiffness for optimal performance. Thirty-four athletes were tested using four different shoe conditions--a standard condition consisting of their currently used footwear and three conditions where the bending stiffness was increased systematically. The sprinters performed maximal effort 40 m sprints and their sprint times were recorded from 20 to 40 m. On average, increasing the shoe bending stiffness increased sprint performance. The stiffness each athlete required for his or her maximal performance was subject specific but was not related to subject mass, height, shoe size or skill level. It is speculated that individual differences in the force-length and force-velocity relationships of the calf muscles may influence the appropriate shoe stiffness for each athlete to obtain their maximal performance.  相似文献   

15.
  相似文献   

16.
研究背景：现有研究文献尚无有关在着地过程中不同表面倾斜度和踝关节护具效应的运动学、动力学和地面反作用力的综合数据。通过对比25°斜面和平面的着地以及使用和不使用踝关节护具情况下来检测踝关节的生物力学特性。研究方法： 11名健康受试者[年龄：（24.6±3.5）岁,身高：（24.6±0.10）m,质量：（65.6±14.9）kg）参与本次研究。受试者在4个动态运动条件下各进行5五次实验：从0.45米高处垂直下落至25°的斜面（IS）或平面（FS）上,使用或不使用半刚性踝关节护具,同时采集三维运动学和测力台地面反作用力数据。利用2×2(表面X踝关节护具)的重复测量方差分析来评估选定的变量。研究结果：与平面着地相比,斜面着地造成较小的垂直和内侧地面反作用力峰值。研究还发现踝关节背曲运动范围、着地角度和背曲速度、最大外翻与跖曲角速度提高,但产生了更大内翻角度和运动范围、着地内翻速度和最大跖曲力矩。踝关节护具在斜面着地时减少了达到地面反作用力第二垂直峰值的时间、着地角度、背曲速度、最大外翻和跖曲速度,但增加了跖曲力矩的最大值。研究结论：斜面增加踝关节额状面的运动范围和踝关节负荷。但是,就斜面着地而言,踝关节护具对踝关节额状面的运动范围和踝关节负荷的影响是相当有限的。  相似文献   

17.
ABSTRACT

Unstable footwear may enhance training effects to the lower-limb musculature and sensorimotor system during dynamic gym movements. This study compared the instability of an unstable shoe with irregular midsole deformations (IM) and a control shoe (CS) during forward and lateral lunges. Seventeen female gym class participants completed two sets of ten forward and lateral lunges in CS and IM. Ground reaction forces, lower-limb kinematics and ankle muscle activations were recorded. Variables around initial ground contact, toe-off, descending and ascending lunge phases were compared statistically (p < .05). Responses to IM compared to CS were similar across lunge directions. The IM induced instability by increasing the vertical loading rate (p < .001, p = .009) and variability of frontal ankle motion during descending (p = .001, p < .001) and ascending phases (p = .150, p = .003), in forward and lateral lunges, respectively. At initial ground contact, ankle adjustments enhanced postural stability in IM. Across muscles, there were no activation increases, although results indicate peroneus longus activations increased in IM during the ascending phase. As expected, IM provided a more demanding training stimulus during lunge exercises and has potential to reduce ankle injuries by training ankle positioning for unpredictable instability.  相似文献   

18.
A protocol has been developed to obtain two-dimensional kinematic shoe data of football players in their training environment through high-speed video analysis. Such kinematic data can provide an understanding of how to better replicate the boundary conditions of football movements when simulated using mechanical traction and penetration test devices. As part of a pilot study, 11 youth academy players from a Premiership football club performed football-specific movements which were filmed at 1000 frames s-1. The protocol required minimal set-up time and the area of the pitch to be filmed could be positioned in any part of the playing area, causing low disruption to the players. This aimed to ensure that the movements performed were representative of those carried out during competitive play. Results in this study are concerned with the kinematics of the shoe during contact with the ground for movements identified to be important in terms of injury risk and loss of performance (slipping). Shoe velocities and orientations were measured for subjects wearing shoes of different stud types (traditional round studs versus contemporary bladed studs) on two surfaces (artificial turf, in-filled with rubber and sand, versus a natural surface). All the parameters measured from the relatively small population of subjects had high variances and therefore few significant effects of studs and surface could be found. The data does however provide insight into the appropriate boundary conditions to be used in mechanical test devices. For example, in the forefoot push-off movement it can be seen that test devices should measure the traction forces when the shoe first starts to move, as this is when the player would lose performance, as opposed to the maximum traction which can occur after significant displacement of the shoe through the surface. Analysis of the orientation and velocity path of the studs just before contact with the ground shows that the studs could be aligned to enhance their penetration into the surface and optimise the traction properties of the studs. In order to determine the orientation and velocity of the shoes at crucial phases in movements force-plate data obtained in the laboratory should be utilised in future studies.  相似文献   

19.
ABSTRACT

Lateral ankle stability and how it changes in different footwear has been investigated for years. Research, however, has shown a lack of reliability or sensitivity of available methodologies. This study aimed to evaluate the test-retest reliability and sensitivity of a novel lateral stability protocol, the Submaximal Lateral Shuffle Test (SLST). We recruited 11 and 40 participants to assess reliability and sensitivity of the SLST, respectively. Participants performed the SLST in footwear that differed in collar height and upper stiffness. ICC values showed good to excellent reliability in peak ankle angles and moments, ground reaction forces, impulses, stance time, and performance time. Significantly lower peak inversion and adduction angles and lower medio-lateral push off peak forces were found in the high cut shoes compared to the low cut shoes. The medio-lateral landing peak force showed lower forces in the high cut shoes. The smallest worthwhile change indicated meaningful differences in 70.0–82.5% of participants for inversion, adduction, medio-lateral landing peak, and push off peak forces. These results, however, were not systematic such that there was not a consistent direction of the difference for all participants. In conclusion, the SLST is a promising protocol to further investigate lateral stability in footwear.  相似文献   

20.
Abstract

Dorsiflexion sport shoes aim to increase jumping capacity and speed by means of a lower position of the heel in comparison with the forefoot, favouring additional stretching of the ankle plantar flexors. In previous studies, contradictory results have been found on the benefits of using this type of shoe. With the aim of comparing a dorsiflexion sport shoe model (DF) with a conventional sport shoe (CS), 41 participants performed a countermovement jump (CMJ) test and an agility test (MAT) with both models of shoe. There were no significant differences in the jump test [CS=35.3 cm (6.4) and DF=35.6 cm (6.4), P>0.05]. In the agility test, the conventional shoe obtained better results than the model with dorsiflexion with regard to time taken to complete the circuit [CS=6236 ms (540) and DF=6377 ms (507), P<0.05)]. In spite of producing pre-stretching of the plantar muscles, the DF sport shoes were not effective for improving either jump power or agility in a specific test.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号