共查询到20条相似文献，搜索用时 797 毫秒
1.
In this paper, a novel reconstruction technique based on level set method and algebraic reconstruction technique is proposed for multiphase flow computed tomography (CT) system. The curvature-driven noise reduction method is inserted into the conventional iteration procedure of algebraic reconstruction technique to improve the image quality and convergence speed with limited projection data. By evolving the image as a set of iso-intensity contours after each updation, the sufficient number of iterations for acceptable results is reduced by 80%-90%, while the image quality is enhanced obviously. Quantitative evaluation of image quality is given by using both relative image error and correlation coefficient. The resultant images can be utilized to detect flow regimes for monitoring industrial multiphase flow. Laboratory results demonstrate the feasibility of the proposed method. Phantoms of four typical flow regimes can be reconstructed from few-view projection data efficiently, and the corresponding image errors and correlation coefficients are acceptable for the cases tested in this paper. 相似文献
2.
The notion of weak Doi-Hopfπ-datum and weak Doi-Hopfπ-module are given as generalizations of an ordinary weak Doi-Hopf datum and weak Doi-Hopf module introduced in （Boehm, 2000）, also as a generalization of a Doi-Hopfπ-module introduced in （Wang, 2004）. Then we also show that the functor forgetting action or coaction has an adjoint. Furthermore we explain how the notion of weak Doi-Hopfπ-datum is related to weak smash product. This paper presents our preliminary results on weak Doi-Hopf group modules. 相似文献
3.
This paper provides an overview of models and methods for estimation of lifetime of technical components. Although the focus in this paper is on wind turbine applications, the major content of the paper is of general nature. Thus, most of the paper content is also valid for lifetime models applied to other technical systems. The models presented and discussed in this paper are classified in different types of model classes. The main classification used in this paper divides the models in the following classes： physical models, stochastic models, data-driven models and artificial intelligence, and combined models. The paper provides an overview of different models for the different classes. Furthermore, advantages and disadvantages of the models are discussed, and the estimation of model parameters is briefly described. Finally, a number of literature examples are given in this paper, providing an overview of applications of different models on wind turbines. 相似文献
4.
We introduce a new algebraic approach dealing with the problem of computing the topology of an arrangement of a finite set of real algebraic plane curves presented implicitly. The main achievement of the presented method is a complete avoidance of irrational numbers that appear when using the sweeping method in the classical way for solving the problem at hand. Therefore, it is worth mentioning that the efficiency of the proposed method is only assured for low-degree curves. 相似文献
5.
Hypersonic vehicles subjected to strong aerodynamic forces and serious aerodynamic heating require more stringent design for an infrared window. In this paper, a finite element analysis is used to present the distributions of thermal and stress fields in the infrared window for hypersonic vehicles based on flowfield studies. A theoretical guidance is provided to evaluate the influence of aerodynamic heating and forces on infrared window materials. The aerodynamic heat flux from Mach 3 to Mach 6 flight at an altitude of 15 km in a standard atmosphere is obtained through flowfield analysis. The thermal and stress responses are then investigated under constant heat transfer coefficient boundary conditions for different Mach numbers. The numerical results show that the maximum stress is higher than the material strength at Mach 6, which means a failure of the material may occur. The maximum stress and temperatures are lower than the material strength and melting point under other conditions, so the material is safe. 相似文献
6.
The effects of stabilizing piles on the stability of an embankment slope are analyzed by numerical simulation. The shear strength reduction method is used for the analysis, and the soil - pile interaction is simulated with zero-thickness elasto-plastic interface elements. Effects of pile spacing and pile position on the safety factor of slope and the behavior of piles under these conditions are given. The numerical analysis indicates that the positions of the pile have significant influence on the stability of the slope, and the pile needs to be installed in the middle of the slope for maximum safety factors. In the end, the soil arching effect closely associated with the space between stabilizing piles is analyzed. The results are helpful for design and construction of stabilizing piles. 相似文献
7.
Using the complete genome of Plasmodiumfalciparum 3D7 which has 14 chromosomes as an example, we have examined the distribution functions for the amount of C or G and A or T consecutively and non-overlapping blocks of m bases in this system. The function P(S) about the number of the consecutive C-G or A-T content cluster conforms to the relation P(S)oce-as;values of the scaling exponent αCG are much larger than αAT; and αAT of 14 chromosomes are hardly changed, whereas αCG of 14chromosomes have a number of fluctuations. We found maximum value of A-T cluster size is much larger than C-G, which implies the existence of large A-T cluster. Our study of the width function ξ(m) of cluster C-G content showed that follows good power law ξ(m)ocm-γ. The average γ for 14 chromosomes is 0.931. These investigations provide some insight into the nucleotide clusters of DNA sequences, and help us understand other properties of DNA sequences. 相似文献
8.
To determine workspace and relationship between the workspace and geometry of parallel manipulator is important for optimum design of parallel manipulators. In this paper, the workspace and the relationship between the workspace and the geometry of 3-UPU parallel manipulators with pure translation axe investigated. Geometric and non-geometric constraints are defined and taken account of in determining the workspace of the translation 3-UPU manipulators. A direct average condition number is used as the global performance index of the workspace. This research shows that there exists an optimal value of the direct average condition number favorable for a good design of parallel mechanisms. The results presented in this paper are useful for the optimum design of 3-UPU parallel manipulators. 相似文献
9.
Long-period ground motion has become an important consideration because of the increasing number of large and long-period structures. Therefore, a thorough investigation on the formation and characteristics of longperiod ground motion is desirable for engineering applications. In this work, an analytical study is performed to examine the effect of several parameters and the combining mode for equivalent harmonic components on the dynamic response of systems. The results of the work show that the harmonic components in equivalent ground motion are evidently influenced by the intensity rise time, duration, phase and combining mode. Moreover, the long-period ground motions are simplified and simulated by separate harmonic components through proper combination. The findings of the work are believed to be useful in the selection of input ground motion in structural seismic analysis. 相似文献
10.
Based on Fuller＇s model, a gradation design is presented for the load-carrying capacity of an asphalt mixture with stone-to-stone contact. The coarse aggregate gradation, fine aggregate and filler gradation are respectively designed for their different effects on an asphalt mixture with stone-to-stone contact. The equation of coarse aggregate gradation is deduced from the Fuller＇s model. Fine aggregate gradation is calculated by using Fuller＇s equation. The asphalt mixture with the 16 mm maximum size of aggregate is verified. When the coefficient of coarse aggregate gradation is 0.35 and fine aggregate gradation is 0.25, the volume parameters of asphalt mixture meet the technical specifications. Moreover, the high temperature stability and crack resistance at low temperature are all well. 相似文献
11.
We present a novel model for recognizing long-term complex activities involving multiple persons. The proposed model, named ＇decomposed hidden Markov model＇ （DHMM）, combines spatial decomposition and hierarchical abstraction to capture multi-modal, long-term dependent and multi-scale characteristics of activities. Decomposition in space and time offers conceptual advantages of compaction and clarity, and greatly reduces the size of state space as well as the number of parameters. DHMMs are efficient even when the number of persons is variable. We also introduce an efficient approximation algorithm for inference and parameter estimation. Experiments on multi-person activities and multi-modal individual activities demonstrate that DHMMs are more efficient and reliable than familiar models, such as coupled HMMs, hierarchical HMMs, and multi-observation HMMs. 相似文献
12.
The expectations for sensor networks are growing. The performance of wireless sensor networks （WSNs） is greatly influenced by their network topology. In this paper, we consider four patterned topologies that best support connectivity among these deployed sensor nodes in two-tiered WSNs. The theoretical and simulation results show that the triangle-based topology has smaller cell number, shorter maximum hop length, less total energy consumption, and better performance than other topologies. The analysis carried out in this paper could provide the guidelines for network deployment and protocol design in the future applications. 相似文献
13.
Due to historic reasons China encounters some special difficulties in ESI(electricity system industry) restructureing,An easy and simple electricity value equivalent(es-EVE) method for day-ahead pool purchase pricing of China is therefore presented in this paper.The es-EVE method is different from two-part and one-part tariffs.It is more like the UK‘s method in form,but revised for China with some new concepts and procedure.The main contributions of it include:(1) Find two kinds of eigenvalue,namely EVEs,in an optimization model.(2) Define new concepts of virtual units units and feasible region,(3) Twice merit orderings are employed successively to find marginal price.They are simple maximum and minimum comparison procedures and so on.The special economic significance of the method for China is discussed.and some suggestion for ESI Restructuring based on es-EVE method are provided.A case study is offered at the end of the paper. 相似文献
14.
A novel non-cable whole tectorial membrane micro-robot for an endoscope is developed. The micro-robot we have fabricated and tested can propel itself in the intestine tract of a pig in an autonomous manner by earthworm-like locomotion. The silicone of bellow shape is laid over the outer surface of the micro-robot to reduce the affection of the viscoelastic properties of the intestine. Wireless power transfer and communication systems are employed to realize the non-cable locomotion of the micro-robot. The prototype of the micro-robot is 13.5 mm in diameter and 108 mm in length. The experimental results show that the towing force for the micro-robot is about 0.8 N, which is much smaller than the maximum driving force 2.55 N of the linear actuator. The supplying power of the wireless power transfer system fulfills the needs of the micro-robot system and the micro-robot can creep reliably in the large intestine of a pig and other contact environments. 相似文献
15.
Virtual design and performance prediction of a silencing air cleaner used in an I.C. engine intake system 总被引：3，自引：0，他引：3
INTRODUCTION The primary function of an intake system is firstly to efficiently channel fresh air to the engine,and secondly to minimize intake noise emissions.There are a number of current approaches for devel-oping a more realistic method to improve intake sys-tem design.The objectives include more effective silencing performance to meet increasingly severe legislative targets for reduced noise on the one hand,with optimized engine performance and fuel economy accompanied by improvements… 相似文献
16.
The standardized IEEE ,802. II distributed coordination function （ DCF） provides a contention-based distributed channel access mechanism for mobile stations to share the wireless medium. However, when stations are mobile or portable units, power consumption becomes a primary issue since terminals are usually battery driven. This paper proposes an analytical model that calculates the energy efficiency of both the basic and the RTS/CTS access mechanisms of the IEEE 802. II protocol. The model is validated with simulation results using NS-2 simulation package. The effects of the network size, the average packet length, the initial contention window and maximum backoff stages on the energy efficiency of both access mechanisms are also investigated. Results show that the basic scheme has low energy efficiency at large packet length and large network size, and depends strongly on the number of stations and the backoff procedure parameters. Conversely, the RTS/CTS mechanism provides higher energy efficiency when the network size is large, and is more robust to variations in the backoff procedure parameters. 相似文献
17.
SINGH Bhupinder SINGH S.P KAUSHIK S.K. 《浙江大学学报(A卷英文版)》2007,8(2):257-263
INTRODUCTION Finite Element (FE) procedures are at present widely used in engineering modelling and analysis and employed extensively in the analysis of solids and structures and heat transfer and fluids (Bathe, 1996). The essence of FE solution of an engineering problem is that a set of governing algebraic equations is es-tablished which are then solved with the help of a digital computer. The first practical FE procedures were employed in linear analysis of solids and struc-tures (B… 相似文献
18.
The Greek term for flower is Chloris. It is derived from the name of the Chloris, the goddess of vegetation, in Greek mythology, reasonably so, if we consider the great number of mythological tales linked to flowers of the Greek flowers. The use of flowers was widespread in Greece from time immemorial, since flowers are so important to us from the moment we are born.Flowers play an important role in mythology. As they morph from bud to bloom to faded and wilted petals, they assume various meanings linked to youth, life and death. They are associated with goddesses and legends, and are often attributed with certain powers and symbolism. 相似文献
19.
It is an important part of green mining to control the disasters of coal mining which have caused irreversible damages to buildings and ecological environment. Strip mining is one of the efficient measures to control surface subsidence and mining damage. However, the research on the laws of the surface subsidence are still deficient in multi-coal seam strip mining at present. Based on the Fast Lagrangian Analysis of Continua （short for FLAC3D） numerical simulation software, the laws of the surface subsidence and horizontal movement were systematically studied for different depths, different mining widths, different distances between seams, different mining thickness, different parameters between seams and the special relations of the upper pillar and the lower pillar in the vertical direction in multi-seam strip mining. The function relation between the maximum subsidence and the maximum horizontal movement with the depth, the mining width, the seam distance, mining thickness, different parameters between seams and the partial offset are summarized respectively. Finally the formula integrating the surface maximum subsidence value and the maximum horizontal movement was deduced. The results can be used for reference theory and measure in forecasting the surface displacement in multi-coal seam strip mining. 相似文献
20.
In order to identify the locations of irreversible loss within the transcritical carbon dioxide refrigeration cycle with an expansion turbine, a method with respect to the second law of thermodynamics based on exergy analysis model is applied. The effects of heat rejection pressures, outlet temperatures of gas cooler and evaporating temperatures on the exergy loss, exergy efficiency and the coefficient of performance (COP) of the expansion turbine cycle are analyzed. It is found that the great percentages of exergy losses take place in the gas cooler and compressor. Moreover, heat rejection pressures, outlet temperatures of gas cooler and evaporating temperatures have strong influence on the exergy efficiency, COP and the exergy loss of each component. The analysis shows that there exists an optimal heat rejection pressure corresponding to the maximum exergy efficiency and COP, respectively. The results are of significance in providing theoretical basis for optimal design and the control of the transcritical carbon dioxide system with an expansion turbine. 相似文献