共查询到18条相似文献，搜索用时 703 毫秒
1.
玻璃纤维布加固的钢筋混凝土梁试验研究与抗弯承载力计算 总被引：1，自引：0，他引：1
对9根玻璃纤维布加固的钢筋混凝土梁和3根对比梁进行了抗弯性能试验研究. 试验中考虑了配筋率、加固量、剪跨比与混凝土强度等级4个参数. 试验结果表明, 经玻璃纤维布加固的钢筋混凝土梁抗弯承载力有显著提高; 混凝土强度、配筋率、加固量对极限荷载有显著影响; 剪跨比对加固梁的破坏形态有影响. 根据不同的破坏模式, 提出了抗弯承载力计算方法. 相似文献
2.
为了解玻璃纤维(GFRP)布与钢筋混凝土梁界面之间的粘结性能,进行了7根GFRP布加固的钢筋混凝土梁与2根对比梁的试验研究.试验的变化参数为GFRP布层数、粘结长度及配筋率.试验结果表明,GFRP布加固的钢筋混凝土梁极限荷载显著提高,但是发生剥离破坏的试验梁极限荷载有所降低,粘结长度是影响加固梁剥离破坏的主要因素.根据试验结果提出了GFRP布与钢筋混凝土梁界面粘结剪应力的试验分析方法并分析了界面间粘结剪应力的分布.同时,提出了GFRP布加固的钢筋混凝土梁剥离正应力与粘结剪应力的理论分析方法.最后,给出了GFRP布加固钢筋混凝土梁剥离荷载的计算方法.为验证理论分析方法的正确性,计算了试验梁界面间的粘结剪应力、剥离正应力及剥离荷载.计算结果表明,所提出的理论分析方法与试验值吻合较好. 相似文献
3.
为研究碳纤维布(CFRP)对加固后钢筋混凝土梁的抗弯疲劳性能的影响,进行了3根CFRP加固梁及1根对比梁的抗弯疲劳试验.研究了碳纤维布加固方式、构件使用荷载等参数对碳纤维布加固损伤钢筋混凝土吊车梁的抗弯疲劳性能影响.试验研究表明:采用碳纤维布加固后,构件裂缝的宽度减小50.2%~66%,发展速度也得到控制,钢筋应力减小24.1%~28.2%,构件的刚度提高14.9%~16.1%.依据试验结果,从现有规范中关于构件刚度计算方法出发,进行了CFRP加固钢筋混凝土吊车梁的疲劳刚度计算分析,该计算方法可用于吊车梁加固工程设计.最后给出了CFRP加固梁的疲劳设计的合理化建议. 相似文献
4.
为研究无机胶粘贴碳纤维布对钢筋混凝土梁高温性能的影响,对3根不同加固方式及防火方式的钢筋混凝土梁进行高温试验。试验结果表明,无机胶及防火涂料对钢筋混凝土梁温度场及跨中挠度有重要作用;与防火性能较差的有机胶相比,无机胶具有较好的耐高温性能,可应用于碳纤维布加固混凝土工程中;防火涂料在火灾过程中具有较好的防火和隔热作用,在防火设计中不可忽略。 相似文献
5.
二次受力下碳纤维布加固梁抗弯性能试验研究 总被引：1，自引：0，他引：1
进行了4根不同二次受力条件下碳纤维布加固的钢筋混凝土梁和1根对比混凝土梁的抗弯性能试验研究。试验及分析结果表明,用粘贴碳纤维布的方法来提高梁的承载力十分有效,且预加载的存在使加固梁的极限荷载降低;碳纤维布能有效约束裂缝的开展,但裂缝的数量增加和分布区域变大,且预加载的大小会影响加固梁裂缝的开展和分布;碳纤维布加固可以增强梁的刚度,但延性有所降低。 相似文献
6.
通过利用大型通用有限元软件ANSYS,对不同卸载情况下碳纤维布加固的钢筋混凝土板的抗弯性能进行了非线性有限元分析.结果发现,对于施加了第一期荷载后须利用碳纤维布加固的钢筋混凝土板,加固前卸荷越多,板的极限承载力越大,越能尽量克服碳纤维布应变滞后,从而尽量发挥碳纤维布的作用。 相似文献
7.
碳纤维布与钢构套复合加固锈蚀钢筋混凝土柱抗震性能研究(英文) 总被引：1，自引：0，他引：1
为改善锈蚀钢筋混凝土柱的抗震性能, 利用碳纤维布与角钢对锈蚀柱进行复合抗震加固. 试验共对12根试件进行了低周反复加载试验, 研究参量包括钢筋锈蚀程度、轴向荷载、碳纤维布层数和角钢用量. 试验结果表明, 利用碳纤维布和角钢复合加固锈蚀柱可以显著改善锈蚀柱的承载能力、延性和耗能能力. 复合加固后, 加固柱的强度和延性与锈蚀柱相比, 可分别提高0.9倍和1倍以上. 基于试验结果, 提出了计算加固构件屈服荷载、最大荷载和位移延性系数的简化公式, 计算结果与试验结果极为吻合. 相似文献
8.
9.
杨瑞新 《河北工业大学成人教育学院学报》2006,21(4):25-29
碳纤维布加固混凝土结构是一种新型加固方法。本文在试验研究的基础上,将抗拉强度很高的碳纤维布用环氧树脂预浸成为复合增强材料;用环氧树脂粘结剂沿受拉方向粘贴在要补强的柱子上,形成一个新的复合体,使补强碳纤维布与原有钢筋混凝土共同受力,增大结构的抗剪、抗弯强度和提高柱的延性。 相似文献
10.
采用试验研究和理论分析相结合的方法,对外贴碳纤维布加固的钢筋混凝土受弯梁进行了分析和研究。在介绍钢筋混凝土加固非线性有限元分析理论基础上,选择合适的材料单元(其中混凝土选用SOLID65单元,钢筋选用LINK8单元,接触单元选用TARGE170和CONTA174,碳纤维布选用SHELL41单元),设定正确的模拟参数,建立合理的非线性有限元梁模型。通过对比研究发现,有限元分析结果与试验结果吻合较好,并从弹塑性理论和有限元理论两个角度详细科学的描述了两者之间产生差异的原因。 相似文献
11.
INTRODUCTION The aging or deterioration of existing R. C.(reinforced concrete) or P. C. (prestressed concrete)structures is one of the major problems that modernengineers have to face. If the flexural or shear strengthof R. C. or P. C. structures is not sufficient to maintaintheir service functions, strengthening of these struc-tures becomes necessary. To date, steel plates havebeen used to strengthen concrete members. Usingcomposite plates to strengthen R.C. or P.C. structures… 相似文献
12.
Strengthening reinforced concrete beams using prestressed glass fiber-reinforced polymer-Part Ⅰ: Experimental study 总被引：2，自引：0，他引：2
This work is aimed at studying the strengthening of reinforced concrete (R. C.) beams using prestressed glass fiber-reinforced polymer (PGFRP). Carbon fiber-reinforced polymer (CFRP) has recently become popular for use as repair or rehabilitation material for deteriorated R. C. structures, but because CFRP material is very stiff, the difference in CFRP sheet and concrete material properties is not favorable for transferring the prestress from CFRP sheets to R. C. members. Glass fiber-reinforced polymer (GFRP) sheets with Modulus of Elasticity quite close to that of concrete was chosen in this study. The load-carrying capacities (ultimate loads) and the deflections of strengthened R. C. beams using GFRP and PGFRP sheets were tested and compared. T- and ⊥-shaped beams were used as the under-strengthened and over-strengthened beams. The GFRP sheets were prestressed to one-half their tensile capacities before being bonded to the T- and l-shaped R. C. beams. The prestressed tension in the PGFRP sheets caused cambers in the R. C. beams without cracks on the tensile faces. The PGFRP sheets also enhanced the load-carrying capacity. The test results indicated that T-shaped beams with GFRP sheets increased in load-carrying capacity by 55% while the same beams with PGFRP sheets could increase load-carrying capacity by 100%. The ⊥-shaped beams with GFRP sheets could increase load-carrying capacity by 97% while the same beams with PGFRP sheets could increase the loading-carrying capacity by 117%. Under the same external loads, beams with GFRP sheets underwent larger deflections than beams with PGFRP sheets. While GFRP sheets strengthen R. C. beams, PGFRP sheets decrease the beams' ductility, especially for the over-strengthened beams (⊥-shaped beams). 相似文献
13.
INTRODUCTION When the flexural load-carrying capacities of existing R. C. or P. C. structures are not sufficient for the service loads, structural strengthening becomes necessary. Using steel plates to strengthen concrete members is a traditional method (Raithby, 1980) and is still an important and popular way at the present time. Fiber-reinforced polymer (FRP) sheets and plates have been used recently as an alternative to steel plates for strengthening concrete structures be-cause th… 相似文献
14.
Strengthening reinforced concrete (R. C.) beams using prestressed glass fiber-reinforced polymer (PGFRP) was studied experimentally as described in Part Ⅰ of this paper (Huang et al., 2005). In that paper, R. C. beams, R. C. beams with GFRP(glass fiber-reinforced polymer) sheets, and R. C. beams with PGFRP sheets were tested in both under-strengthened and over-strengthened cases. The test results showed that the load-carrying capacities (ultimate loads) of the beams with GFRP sheets were greater than those of the beams without polymer sheets. The load-carrying capacities of beams with PGFRP sheets were greater than those of beams with GFRP sheets. The objective of this work is to develop an analytical method to compute all of these load-carrying capacities. This analytical method is independent of the experiments and based only on the traditional R. C.and P. C. (prestressed concrete) theory. The analytical results accorded with the test results. It is suggested that this analytical method be used for analyzing and designing R. C. beams strengthened using GFRP or PGFRP sheets. 相似文献
15.
Strengthening reinforced concrete （R. C.） beams using prestressed glass fiber-reinforced polymer （PGFRP） was studied experimentally as described in Part I of this paper （Huang et al., 2005）. In that paper, R. C. beams, R. C. beams with GFRP （glass fiber-reinforced polymer） sheets, and R. C. beams with PGFRP sheets were tested in both under-strengthened and over-strengthened cases. The test results showed that the load-carrying capacities （ultimate loads） of the beams with GFRP sheets were greater than those of the beams without polymer sheets. The load-carrying capacities of beams with PGFRP sheets were greater than those of beams with GFRP sheets. The objective of this work is to develop an analytical method to compute all of these load-carrying capacities. This analytical method is independent of the experiments and based only on the traditional R. C. and P. C. （prestressed concrete） theory. The analytical results accorded with the test results. It is suggested that this analytical method be used for analyzing and designing R. C. beams strengthened using GFRP or PGFRP sheets. 相似文献
16.
通过9根表层嵌入碳纤维增强塑料板条抗剪加固的钢筋混凝土梁和4根对比梁的静载试验,分析了构件的破坏形态、斜截面纤维应变分布特征及加固后极限承载力的影响因素。研究结果表明：嵌入式加固与外贴加固相比,可以明显地提高钢筋混凝土梁的抗剪承载力,并改变构件的变形性能。最后,在国内外研究资料的基础上,提出了加固后混凝土梁的受剪承载力计算公式,并对计算值与试验值进行了比较,结果吻合较好。 相似文献
17.
Feras ALZOUB ZHANG Qi LI Zheng-liang 《重庆大学学报(英文版)》2007,6(4):305-310
This paper presents the results of an experimental investigation on the response of pre-damaged reinforced concrete (RC) beam strengthened in shear using applied-epoxy unidirectional carbon fiber reinforced polymer (CFRP) sheet. The reasearch included four test rectangular simply supported RC beams in shear capacity. One is the control beam, two RC beams are damaged to a predetermined degree from ultimate shear capacity of the control beam, and the last beam is left without pre-damaged and then strengthened with using externally bonded carbon fiber reinforced polymer to upgrade their shear capacity. We focused on the damage degree to beams during strengthening, therefore, only the beams with side- bonded CFRPs strips and horizontal anchored strips were used. The results show the feasibility of using CFRPs to restore or increase the load-carrying capacity in the shear of damaged RC beams. The failure mode of all the CFRP-strengthened beams is debonding of CFRP vertical strips. Two prediction available models in ACI-440 and fib European code were compared with the experimental results. 相似文献
18.
Carbon fiber reinforced polymer(CFRP)bars were prestressed for the structural strengthening of 8 T-shaped rein-forced concrete (RC)beams of a 21-year-old bridge in China.The ultimate bearing capacity of the existing bridge after retrofit was discussed on the basis of concrete structures theory.The flexural strengths of RC beams strengthened with CFRP bars were controlled by the failure of concrete in compression and a prestressing method was applied in the retrofit.The field construction processes of strengthening with CFRP bars-including grouting cracks,cutting groove,grouting epoxy and embedding CFRP bars,surface treating,banding with the U-type CFRP sheets,releasing external prestressed steel tendons-were introduced in detail.In order to evaluate the effectiveness of this strengthening method,field tests using vehicles as live load were applied before and after the retrofit.The test results of deflection and concrete strain of the T-shaped beams with and without strengthening show that the capacity of the repaired bridge,including the bending strength and stiffness,is enhanced.The measurements of crack width also indicate that this strengthening method can enhance the durability of bridges.Therefore,the proposed strengthening technology is feasible and effective. 相似文献