排序方式： 共有58条查询结果，搜索用时 156 毫秒
31.
Understanding the biological feeding strategy and characteristics of a microorganism as an actuator requires the detailed and quantitative measurement of flow velocity and flow rate induced by the microorganism. Although some velocimetry methods have been applied to examine the flow, the measured dimensions were limited to at most two-dimensional two-component measurements. Here we have developed a method to measure three-dimensional two-component flow velocity fields generated by the microorganism Vorticella picta using a piezoscanner and a confocal microscope. We obtained the two-component velocities of the flow field in a two-dimensional plane denoted as the XY plane, with an observation area of 455×341 μm2 and the resolution of 9.09 μm per each velocity vector by a confocal microparticle image velocimetry technique. The measurement of the flow field at each height took 37.5 ms, and it was repeated in 16 planes with a 2.50 μm separation in the Z direction. We reconstructed the three-dimensional two-component flow velocity field. From the reconstructed data, the flow velocity field [u(x,y,z),v(x,y,z)] in an arbitrary plane can be visualized. The flow rates through YZ and ZX planes were also calculated. During feeding, we examined a suction flow to the mouth of the Vorticella picta and measured it to be to 300 pl∕s. 相似文献
32.
Detailed time-series of the resultant joint moments and segmental interactions during soccer instep kicking were compared between the preferred and non-preferred kicking leg. The kicking motions of both legs were captured for five highly skilled players using a three-dimensional cinematographic technique at 200 Hz. The resultant joint moment (muscle moment) and moment due to segmental interactions (interaction moment) were computed using a two-link kinetic chain model composed of the thigh and lower leg (including shank and foot). The mechanical functioning of the muscle and interaction moments during kicking were clearly illustrated. Significantly greater ball velocity (32.1 vs. 27.1 m . s(-1)), shank angular velocity (39.4 vs. 31.8 rad . s(-1)) and final foot velocity (22.7 vs. 19.6 m . s(-1)) were observed for the preferred leg. The preferred leg showed a significantly greater knee muscle moment (129.9 N . m) than the non-preferred leg (93.5 N . m), while no substantial differences were found for the interaction moment between the two legs (79.3 vs. 55.7 N . m). These results indicate that the highly skilled soccer players achieved a well-coordinated inter-segmental motion for both the preferred and non-preferred leg. The faster leg swing observed for the preferred leg was most likely the result of the larger muscle moment. 相似文献
33.
Yamada H 《Child development》2004,75(1):164-179
Sixty-four Japanese mothers of 3- to 6-year-olds were interviewed concerning their conceptions of children's areas of personal control. Mothers granted children choices regarding recreational activities, clothes, and friends to foster autonomy and competence, but they set limits around daily routines, recreational activities, and interpersonal confrontation based on moral, conventional, and prudential concerns. Mothers believed in reaffirming children's personal boundaries when children failed to follow through with their initial decisions. Mothers experienced conflict with children around daily routines and recreational activities and used various resolution strategies. Mothers perceived child resistance as egocentric whereas fewer considered it as establishing personal boundaries. Some age and gender differences were observed. Results supported the heterogeneity of social judgments and practices of individuals within cultures. 相似文献
34.
Yoshinori Nagasawa Shinichi Demura 《Measurement in physical education and exercise science》2013,17(3):140-150
This study aimed to examine the age and sex differences in controlled force exertion measured by the bar chart display in 207 males (age 42.1 ± 19.8 years) and 249 females (age 41.7 ± 19.1 years) aged 15 to 86 years. The subjects matched their submaximal grip strength to changing demand values, which appeared as a moving bar chart on the display of a personal computer. The subjects performed the controlled force exertion test using the dominant hand three times with 1-min intervals (one trial was 40 sec) after one practice trial. A total of the differences between the demand value and the grip exertion value for 25 sec was used as the evaluation parameter. The errors in controlled force exertion showed a right-skewed distribution in both sexes but showed a normal distribution after logarithmic transformation (males, W = .06; females, W = .74; p > .05). In addition, the errors in controlled force exertion tended to increase constantly with age in both sexes. Significant linear regressions were identified (r 2 males = .88, r 2 females = .81), but there was no significant difference in the increase rate of both sexes. The results of the analysis of variance and multiple comparisons showed insignificant sex differences among means, except for those in individuals older than 70 years; significant differences between means in the older than 40-year-old age group and the 20-year-old age group were found in both sexes. Individual differences were almost the same in both sexes (CVmales = 20.0～34.8, CVfemales = 17.7～36.2). Errors in controlled force exertion showed a nonsignificant sex difference and increased gradually with age in both sexes but increased remarkably with age after 40 years of age. 相似文献
35.
Validity and reliability of body composition assessed by the sulphur hexafluoride dilution method 总被引：1，自引：0，他引：1
The aims of this study were to assess the validity and reliability of body volume and percent body fat determined by sulphur hexafluoride dilution, using underwater weighing as the criterion method, and to determine the influence of the magnitude of body volume. Thirty-one healthy Japanese individuals aged 18-27 years (16 males: height 1.70 +/- 0.06 m, mass 64.8 +/- 7.7 kg; 15 females: height 1.60 +/- 0.05 m, mass 55.2 +/- 6.2 kg; mean +/- s) participated in the study. Sulphur hexafluoride dilution measures the concentration of sulphur hexafluoride gas in the chamber (BSF-200, Shimazu Corp.). Underwater weighing was performed five times using a weight scale (AD-6204, A&D) after residual volume had been determined (System9, Minato Medical Corp.). There were no significant differences in the mean between two trials for body volume, body density or percent body fat determined by sulphur hexafluoride dilution. The intra-class correlation coefficient of these variables ranged from 0.985 to 0.999. The results suggest that sulphur hexafluoride dilution is a reliable method for assessing body composition. There was no significant difference in body volume or percent body fat between sulphur hexafluoride dilution (males: 61.3 +/- 7.6 litres, 18.4 +/- 6.7%; females: 52.8 +/- 6.9 litres, 21.0 +/- 8.9%) and underwater weighing (males: 60.6 +/- 7.0 litres, 15.6 +/- 3.5%; females: 53.0 +/- 6.5 litres, 23.7 +/- 6.1%) and there was a high correlation between the two (r = 0.997, P < 0.05). A Bland-Altman plot of the difference between percent body fat estimated by underwater weighing and sulphur hexafluoride dilution versus average percent body fat by the two methods showed no systematic difference (mean difference = -0.12 +/- 6.6 kg). The upper and lower limits of agreement were 13.2% and -13.4%, respectively. Determination by sulphur hexafluoride dilution resulted in both over- and underestimations in body volume and the difference between the two body volumes (determined by underwater weighing and by sulphur hexafluoride dilution) was inversely proportional to the mean body volume by the two methods. This suggests that improvements need to be made to the device or to the technique to maintain a constant volume of sulphur hexafluoride in the chamber. 相似文献
36.
Muraki Y Ae M Yokozawa T Koyama H 《Sports biomechanics / International Society of Biomechanics in Sports》2005,4(1):1-15
The aim of this study was to establish the functions of the support leg in the long jump take-off with a three-element mechanical model spring, damper, and actuator The take-off motions of eleven male long jumpers, with personal bests from 6.45 to 7.99 m, were videotaped at 250 Hz and ground reaction forces were simultaneously recorded at 1 kHz. A two-dimensional 14-segment linked model was used to collect basic kinematic parameters. The spring, damper and actuator forces were determined from the displacement and velocity of the centre of mass and from ground reaction forces. Large spring and damper forces were exerted, and absorbed the impact force immediately after the touch-down. The spring force was also exerted from 25 to 75% of the take-off phase. The actuator force was dominant in the latter two-thirds of the take-off phase. Statistically significant correlations were found between the spring force impulse and the knee flexion during the take-off phase (r = 0.699, p < 0.05), and between the knee flexion and the angular velocity of the thigh at the touch-down (r = 0.726, p < 0.05). These results indicated that the jumper should retain less flexion of the take-off leg knee to increase the spring force, after a fast extension of the hip, and use a more extended knee at the touch-down to prevent excessive knee flexion. 相似文献
37.
Determinants of successful R&D cooperation in Japanese small businesses: The impact of organizational and contractual characteristics 总被引：1，自引：0，他引：1
Using original survey data on Japanese small businesses, this paper analyses the impact of the organizational and contractual characteristics of cooperative R&D, such as membership structure, partner relationship, external support, and rules of cost and outcome sharing, on the probability of the technological and commercial success of the project. Empirical results suggest that cooperative R&D is more successful, the higher the quality and quantity of external resources available through cooperation, and the lower the transaction and coordination costs required for such arrangements. Moreover, we found that the determinants of technological and commercial success differ considerably. 相似文献
38.
基于 8个碳纤维布约束高强混凝土棱柱体试件的试验 ,研究了碳纤维布对提高高强混凝土抗压强度和改善其变形性能的作用 .试验发现 ,包裹碳纤维布可以提高试件的抗压强度 ,并有效地改善混凝土的变形性能 ,其效果随碳纤维用量的增加而更加显著 .在试验基础上 ,根据理论分析和对试验结果的整理 ,归纳出碳纤维布约束高强混凝土的应力 应变全曲线方程 .最后 ,利用提出的全曲线方程编制计算机程序 ,分析了包裹碳纤维布对提高高强混凝土压弯构件的强度和延性的作用 相似文献
39.
Many coaches often instruct swimmers to keep the elbow in a high position (high elbow position) during early phase of the underwater stroke motion (pull phase) in front crawl, however, the high elbow position has never been quantitatively evaluated. The aims of this study were (1) to quantitatively evaluate the “high elbow” position, (2) to clarify the relationship between the high elbow position and required upper limb configuration and (3) to examine the efficacy of high elbow position on the resultant swimming velocity. Sixteen highly skilled and 6 novice male swimmers performed 25 m front crawl with maximal effort and their 3-dimensional arm stroke motion was captured at 60 Hz. An attempt was made to develop a new index to evaluate the high elbow position (Ihe: high elbow index) using 3-dimensional coordinates of the shoulder, elbow and wrist joints. Ihe of skilled swimmers moderately correlated with the average shoulder internal rotation angle (r = ?0.652, P < 0.01) and swimming velocity (r = ?0.683, P < 0.01) during the pull phase. These results indicate that Ihe is a useful index for evaluating high elbow arm stroke technique during the pull phase in front crawl. 相似文献
40.
A new method was established for the continuous measurement of force applied from a springboard to a gymnast in vaulting (board reaction force). Male gymnasts performed a handspring vault using a springboard mounted on force platforms. A high-speed video camera sampled the springboard motion at 500 Hz. The springboard was initially partitioned into 29 segments. The force due to the accelerative motion of the springboard was determined by summing the forces of the individual segments. The board reaction force acting on the gymnast was calculated by subtracting the force due to the accelerative motion of the springboard and weight from the force recorded by the force platform. The new method succeeded in illustrating transient changes of the board reaction force. The horizontal and vertical components of the peak values of the board reaction force were three and two times greater respectively than the average values. A series of tests was conducted to determine whether the number of segments of the springboard model could be reduced without affecting accuracy. A model consisting of only four segments produced almost the same accuracy as the 29-segment model. The simplified model is recommended as a more efficient method to measure board reaction force. 相似文献