共查询到20条相似文献,搜索用时 671 毫秒
1.
2.
基于样图的纹理合成基本思想是根据给定的小区域的纹理样本,拼合生成任意大小的纹理图像并且在视觉上与样本是相似而连续的。通过对基于样图的纹理合成算法进行研究,在待合成纹理块的搜索策略上,提出优先搜索前一个已合成纹理块在样图中的位置附近,快速定位下一个用于合成的纹理块。在纹理块的匹配策略中引入小波变换,结合小波变换后的小波系数和小泼变换后的低频域图像进行块的重叠区域匹配,最后使用最小路径法将待合成纹理块缝合到输出图像中。充分考虑了样图的结构信息并提高了合成速度,获得了较好的纹理合成效果。 相似文献
3.
4.
提出了一种双树复小波域基元共生矩阵的纹理特征提取方法。利用双树复小波域作为分析域,以纹理基元作为依据,来描述纹理的局部特征,提取图像纹理特征值。实验结果表明,该方法能有效提取出多尺度、多方向的纹理特征,并兼顾纹理局部随机性和整体规律性,所提取的纹理特征具有良好的聚类分离度和类内样本差异性。 相似文献
5.
提出了一种基于模板匹配的图像修复方法。该算法在所有的待修复区域边缘寻找优先权最高的待修复块,在规定的样本区域寻找与上一步所得的具有最高优先权的待修复块最为匹配的样本块,用所得的最佳样本块填充所受损的图像区域,直到图像整体修复完成。试验仿真表明该方法在大面积图像受损的条件下,实现了图像的纹理信息保护,整幅图像有较好的修复视觉效果。 相似文献
6.
将随机森林引入图像分类研究.首先利用MR8滤波器组进行纹理过滤,然后用随机子窗口对这些响应提取纹理特征,用随机森林进行训练.对待测图像采样后导入已训练完成的随机森林,用投票的方式为其预测类别.引入MR8滤波器组,将随机森林扩展为能处理滤波图像块,用于纹理图像的分类.在CURe T图像库上的实验表明,该方法能够取得优良的分类精度,并具有较高的分类效率. 相似文献
7.
8.
9.
10.
提出一种基于颜色和纹理特征的图像检索方法,采用颜色直方图表示图像的颜色特征,利用Gabor小波提取图像的纹理特征,为进一步提高图像检索的质量引入相关反馈机制,提出了一种动态调整两幅图像相似度中颜色特征和纹理特征的权值系数的方法。实验结果表明,该方法具有较好的检索性能。 相似文献
11.
本文结合图像数据的特点论述了适合于描述图像数据库的模型——扩充的关系数据库模型。并给出了汽车图像数据库的具体实现方案,系统框图,以及软硬件实现。 相似文献
12.
The objective of the present research is to investigate the relationship among tool wear, surface topography, and surface roughness when high-speed end milling Ti-6Al-4V alloy, and also to define an optimal flank wear criterion for the cutting tool to integrate tool life and the surface roughness requirements of the finish milling process. An annealed Ti-6Al-4V alloy was selected as the workpiece material, undergoing end milling with uncoated carbide inserts. The flank wear of the insert was observed and measured with the toolmaker's microscope. To examine machined surfaces, 3D surface topography was provided by the white light interferometer, and the arithmetical mean roughness (Ra) was calculated with the WYKO Vision32 software. The flank wear increases with cutting time, and the maximal flank wear is set as the flank wear criterion. As the cutting process progresses, tool wear is the predominant factor affecting the variation of surface roughness. According to the plots for the tool wear propagation and surface roughness variation, an optimal flank wear criterion can be defined which integrates the tool life and the surface roughness requirements for the finish milling process. 相似文献
13.
高广进 《天津职业院校联合学报》2011,13(2):43-46
在高速铣削中由球头铣刀的几何因素致使加工表面残留高度发生相应改变,而其影响因素是多方面的,通过对铝合金试件的表面粗糙度实验分析出不同几何因素对加工表面质量的影响程度。 相似文献
14.
基于多级夹角函数的傅里叶形状描述子(英文) 总被引:1,自引:0,他引:1
为了描述形状由全局信息到局部变化的层次信息,提出一种有效的形状签名,即多级夹角函数.多级夹角函数具有内在的旋转、平移和缩放不变性.对轮廓上每一点,其多级夹角函数通过轮廓的非等弧长分割所得的成对线段计算得到.然后利用多级夹角函数推导出傅里叶描述子,以进行高效的形状检索.使用标准的性能评价方法对所提出的描述子在3个形状图像库上进行了测试,包括MPEG-7图像库、Kimia-99图像库和Swedish树叶图像库.形状检索实验结果表明,基于多级夹角函数的傅里叶描述子优于已有的傅里叶描述子,且具有较低的计算复杂度.与其他类型的形状描述方法相比,所提出的描述子在相同查全率时具有最高的查准率,证明了该描述子的有效性. 相似文献
15.
吴海勇 《南京晓庄学院学报》2005,21(5):22-24
本文比较了GDI+下三种提取JPEG图像像素值的方法,然后用Robot算子提取图像的边缘,最后用GDI+方式将它保存到图像文件。 相似文献
16.
17.
18.
工件已加工表面的鳞刺,对工件表面粗糙度有严重的影响,本文通过对鳞刺的形成过程进行了详细分析,得出了鳞刺的形成原因,并且提出了防止措施。 相似文献
19.
在图像主分量分析的基础上,提出了一种基于图像矩阵变换的主分量分析方法.该方法首先对图像矩阵进行适当的变换,用得到的新的图像矩阵构造图像总体散布矩阵后,再运用图像投影主分量分析进行特征抽取.该方法在ORL标准人脸库上的试验结果表明,经过适当的变换后抽取的鉴别特征在识别性能和速率上均优于单纯的图像主分量分析方法.另外,在AR人脸库上的试验结果也表明该方法对光照变化具有较强的鲁棒性. 相似文献
20.
This paper presents the characteristics of nickel-based alloys, alongside their division into groups, and describes the features that make such materials difficult to grind. The possibilities of exerting a positive influence upon machining conditions, especially through the proper application of grinding fluids, are briefly presented. Both the precise methodologies for, and the results of, the experimental tests carried out on flat surfaces are also detailed. The aim of these tests was to determine the influence of the application of two types of grinding liquid (Ecocut Mikro Plus 82 and Biocut 3000) upon the grinding force values and surface roughness of the machined workpieces made from three nickel alloys (Nickel 201, INCONEL® alloy 600, and MONEL® alloy 400). An additional goal of the tests was to determine the influence of grinding wheel structure on the course and results of the machining process. The results indicate that the physical and chemical properties of Biocut 3000 enabled the most advantageous properties of the machined surface roughness, alongside a simultaneous increase in grinding power, when compared to the results when applying Ecocut Mikro Plus 82. The results showed an almost inversely proportional dependence upon the specific tangential grinding force F t′ and arithmetic mean deviation of the surface profile R a values, especially in cases of machining Nickel 201 and INCONEL® alloy 600. The original traverse grinding methodology used in the tests made it possible to assess the changes of the grinding conditions within the conventionally selected zones. 相似文献