首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 453 毫秒
1.
“临界速度”就是指物体运动“刚好出现”或“刚好不出现”某种现象时的速度.求临界速度是处理临界问题的关键,其基本思惟方法是假设推理法.本文将圆周运动物体的几种临界速度的求解作一归纳. 一、线端小球在竖直面内做圆周运动时,刚  相似文献   

2.
数控机床是机械、液压、电气和计算机技术高度集成的一体化产品,其故障的发生也多数是机械、液压、电气等方面的综合反映。主要介绍了数控机床爬行与振动的现象,并对其进行分析,提供了诊断数控机床爬行与振动现象的方法和思路。  相似文献   

3.
首先介绍液压系统爬行现象,然后详细分析了液压系统油液中混有空气导致的爬行现象、滑动副摩擦阻力不均导致的爬行现象以及液压元件内漏或失灵,最后对爬行现象的各种因素进行归纳总结,结合此例说明其原因及排除方法。  相似文献   

4.
车削螺纹时发生的"啃刀"现象,其主要原因是:刀架部件刚度变化;加工硬化和小滑板产生了爬行。防止产生此现象的方法是:调整中、小滑板的塞铁间隙;保持车刀刃口的锋利以减小加工硬化程度,同时可在车刀前刀面上磨出圆弧和预防"爬行"产生。  相似文献   

5.
圆周运动中临界状态及临界条件的分析是圆周运动中的一类重要问题,其主要有临界速度、临界受力、临界约束等.下面对此作简单的阐述,供同学们参考一、圆周运动中的临界速度问题变速圆周运动中的某些特殊位置上,常存在着最小(或最大)的速度,小于(或大于)这个速度,物体就不能再继续作圆周运动了,这个速度常称为临界速度.  相似文献   

6.
八十年代的航空、航天以及超大规模集成电路等尖端技术之能够成为现实,无不与超精密加工发生紧密的联系。现代超高精度加工技术的开发目标是毫微米加工,即实现紫外线波长到X光波长(10~(-9)m)的加工精度。但机床运动部件在低速移动时会出现爬行现象,如何抑制爬行?本文通过大量的试验对爬行机理进行研究并提出一种用法向激振来抑制爬行的办法。实验结果表明是可行的,引起同行专家的注目。  相似文献   

7.
本定量分析了PALp彩色解调中的延时误差和幅度误差所行起的串色效应,并对串色在屏幕上引起的爬行现象作出了定性的解释.指出了减小爬行的有效连径。  相似文献   

8.
正例题1:蚂蚁离开蚁巢沿直线爬行,它的速度与它到蚁巢中心的距离成反比。当蚂蚁爬到距蚁巢中心L_A=1m处的A点时,速度是V_A=2cm/s。求:蚂蚁继续由A点爬到距蚁巢中心L_B=2 m的B点时需要多长的时间?解析:设蚂蚁爬行速度v=k/T,其中k为常数。由题意有V_A=2cm/s,求得k=O.02m~2/s。  相似文献   

9.
走捷径     
如图画的是一个圆柱体,一只蜘蛛若从A点沿着虚线匀速爬行至B点需要10秒钟,从B点沿着底圆的边爬行到C点需要5 秒钟,请问,如果这只蜘蛛的爬行速度不变,它再从C点爬行至A点,最少需要多少秒钟呢?  相似文献   

10.
蚂蚁在物体的表面爬行是我们日常生活中经常看到的现象,研究它爬行的最短距离却涉及到数学中重要的勾股定理.蚂蚁爬行问题也就成了中考的热点.现略举两例,浅析如下,供同学们学习时参考.  相似文献   

11.
In the current study the reading speed of the narration and the difficulty of the text was manipulated and links were explored with children’s attention to the printed text in shared book reading. Thirty-nine children (24 grade 1 and 15 grade 2) were presented easy and difficult books at slow (syllable by syllable) or fast (adult reading speed) pace while their eye movements were monitored. Results revealed an interaction between speed and difficulty. For the easy and difficult books, children spent more time and made more fixations on the printed text when it was presented at slow speed than at fast speed. However, at fast speed, children spend more time and made more fixations on the text of the easy rather than the difficult books, but at slow speed no difference was observed. In addition, at slow speed positive correlations were observed between attention to print and letter knowledge and word reading skills. Results provide important information for the practice of shared book reading suggesting that to increase attention to print, speed should be reduced. Future research should investigate the role of reading speed on reading related outcomes such as discourse comprehension and children’s interest in reading activities.  相似文献   

12.
文章在引用流体力学一些结论的基础上 ,对物体做漂流运动的速度特征进行分析和讨论 ,从而得出物体的漂流速度大于水的流速并正比于其质量的结论  相似文献   

13.
在电力系统发生故障后,数字式继电保护中的数字滤波器的暂态响应速度将影响到故障的切除时间。文章分析了超高压电力线发生单相接地故障时电流中的指数分量,估算出与实际录波电流相近的衰减系数。将该指数分量和基波分量的叠加信号作为研究对象,讨论了设计零、极点数字滤波器时的极点位置对于数字滤波器的暂态响应速度的影响。在设计数字滤波器时要根据输入信号的特点,兼顾滤波性能和响应速度选择适当的极点位置。  相似文献   

14.
用全新的方法推证了人造卫星在某点运行速度的近似公式,并给出了人造地球卫星绕地球一周所需时间的简明公式.  相似文献   

15.
我们所研制的含钙易切钢(40 CrCa)的可加工性具有一个明显的特点,即在某一切削速度范围内,这种钢的可加工性是随着切削速度的提高而改善的。当切削速度V≈200米/分时,可加工性达到最佳状态。此时刀具的耐用度为切削普通钢(40Cr)时的8倍。 这种易切钢的可加工性特别好的原因在于:用钨、钛、钴类硬质合金刀具(YT15)以高的切削速度切削这种钢时,钢中的球状氧化夹杂物会软化,并且沉积在刀具表面上形成一层薄膜,这层薄膜对刀具的磨损有阻碍作用。  相似文献   

16.
浅析标枪助跑速度与成绩的关系   总被引:2,自引:0,他引:2  
提高标枪助跑的可控速度是获得理想初速度的关键.良好的加速形式是助跑速度逐渐增大的过程.标枪出手的可控速度应处在助跑速度的最大速度峰值,所以.在标枪运动员的训练过程中,应从提高助跑加速的形式曲线即可控速度方面进行训练,减少助跑速度的损失,这对掷标枪运动成绩有着重要的现实意义.统计分析可为进一步改进技术,指导训练,提供参考依据.  相似文献   

17.
The rapid spread affranchising activity by universities over the last few years has been a quiet revolution - revolutionary in its speed and radical nature, but so quiet that its significance has yet to be assessed. Publications on franchising, and there are only a few, are investigative and informative, rather than analytical or policy-oriented. This is perhaps because there has been no major national policy lead on franchising. Government departments and national bodies have contributed at best encouragement and recognition; at worst suspicion and obstruction. In the tradition of revolutionary activity, franchising has been a bottom-up initiative, institution-led, and at a speed which, 'In a sector not known as a quick-change artist is breathtaking'. This paper examines the origins, nature and implications of this quiet revolution.  相似文献   

18.
基于线性振动理论分析并计算了滚动轴承和滑动轴承联合作用下转子系统理想对中和不对中时的不平衡响应。结果表明,不平衡响应主要发生在临界转速附近,此时不对中量对系统的不平衡响应的影响非常显著,而在工作转速处,不对中量对系统不平衡响应的影响变小。  相似文献   

19.

Aims

Speed reading is advertised as a way to increase reading speed without any loss in comprehension. However, research on speed reading has indicated that comprehension suffers as reading speed increases. We were specifically interested in how processes of inference generation were affected by speed reading.

Methods

We examined how reading speed influenced inference generation in typical readers, trained speed readers and participants trained to skim read passages. Passages either strongly or weakly promoted a bridging or predictive inference. After reading, participants performed a lexical decision task on either a nonword, neutral or inference‐related word.

Results

Typical readers responded to strong and weak inference words faster than neutral words. There were no statistical differences in reaction time between inference‐related and neutral words for speed and skim readers.

Conclusions

These findings provide no substantive evidence that the appropriate inferences are generated when reading at rapid speeds. Thus, speed reading may be detrimental to normal integrative comprehension processes.  相似文献   

20.
Cache技术及应用   总被引:3,自引:0,他引:3  
这几年,CACHE技术被广泛应用.CACHE实际上就是一种高速缓冲存储器,现在CPU的速度比主存的速度愈来愈快,如果CPU直接对主存访问,将减小的效率,则将大的较慢的主存与小的较快CACHE的存储器放在一起.CACHE内存的目的是将内存速度提高到最快,同时以较低的价格提供较大的内存空间的半导体存储器.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号