首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 78 毫秒
1.
The influence of chemical treatments based on novel organic products on the consolidation of deteriorated wood by insect attack was evaluated on two hardwoods and one softwood: fir (Abies alba), beech (Fagus sylvatica) and deciduous oak (Quercus sp.). Degraded and intact specimens of the three wood species were impregnated with two different chemical treatments aimed to verify the potential synergic action of the novel products on wood. Then, the specimens were subjected to bending, compression parallel to the grain, impact, hardness and water absorption tests. Untreated specimens of the same botanical species, both degraded and non-degraded, were examined for comparison purposes. The experimental results showed a different effectiveness of the proposed chemical treatments to improve the mechanical and absorption properties of degraded wood. The most effective treatment was the one assuming the concurrent use of the studied novel consolidants. The species more susceptible of the enhancement in mechanical properties were fir and beech. The observed differentiations were most likely caused by the different structure of the botanical species considered, leading to a consequent different product penetration in the wood structure. The dimensional stability in terms of water repellent and antiswelling efficiency, after a three-month immersion in deionized water, was found to improve in all the treated wood specimens. Overall, experimental results showed that the impact of the chemical treatments was higher on degraded samples than on intact ones.  相似文献   

2.
This article demonstrates the importance of treatment application procedures on the consolidation effectiveness obtained by comparison of the results obtained using three different consolidants on four carbonate stone types, and proposes a general methodology for assessing the potential effectiveness of consolidants in laboratory conditions. It stresses the relevance of taking into account the treatment methodology, given the influence application protocols can have on the overall behaviour of the consolidated material. Several mechanical properties were assessed to demonstrate this influence on the performance of the consolidant. The results demonstrate that the strengthening action achieved with a specific product can only be defined in a strict relation to the treatment protocol used to produce it. The results also contribute towards the definition of standard testing protocols on stone consolidation. The application of a consolidant by direct contact capillary absorption is a reliable procedure and the results are easier to interpret than others obtained by brushing or by full immersion, thus making this procedure a good candidate for an eventual standard laboratory assessment method of the consolidation action of any specific stone/consolidant combination. This study also showed that the best test method to assess the strengthening action of stone consolidants in soft stones is DRMS (Drilling Resistance Measuring System). Moreover, the collection of longitudinal ultrasound velocity profiles determined in stones specimens treated by contact capillary absorption was shown to be a useful non-destructive method to assess the depth of the strengthening action achieved.  相似文献   

3.
It is a common practice to use several chemical products during restoration projects of monuments or sculptures. However, care must be taken when combining the products to avoid a misuse. For example, it is well-known that applying a biocide on stone before a water-repellent leads to a diminishment of the hydrophobic effect of the treatment. But the application of biocide after a water-repellent treatment has been poorly analysed, although studies have proven that the stone looses its hydrophobicity after the application of the biocide. Henceforth, this study investigates the effects of biocide application on a water-repellent film and focuses on the possibilities to restore the efficiency of the previous water-repellent treatment (after the application of the biocide). At first, the tests were performed on glass slides to understand the mechanisms, with the subsequent results revealing that the biocide product deposits on the water-repellent film. Then, the study focuses on determining methods to remove the remains of biocide on limestone samples, previously treated with a water-repellent. The water-repellent used in the study is an alkylpolysiloxane, Rhodorsil H224 from Rhodia.  相似文献   

4.
Epoxy resins, widely used in conservation, still remain controversial materials. Considering some of the drawbacks that currently limit the application of epoxy consolidants, we present the application of the cationic ring opening polymerization as a novel method to cure the epoxy monomer in the restoration field. The cationic polymerization was carried out through a redox system based on the reduction of the iodonium salt in the presence of ascorbic acid catalyzed by a copper salt. The use of this initiator system for carrying out a suitable consolidant for lime plaster is considered. First, the film properties of the cured films were investigated. Then, the formulation was applied on a sample of plaster and its compatibility was verified. Its effectiveness as a consolidant product is explored through the evaluation of chromatic changes, mechanical strength, morphology of the re-aggregated material, and changes of the surface properties.  相似文献   

5.
Library materials are susceptible to fungal deterioration. The paper constituents of archival materials are subjected to harmful physical and chemical processes as they are slowly consumed by fungi. Remediation of fungal contamination can be costly and risk further damage to fragile or previously degraded materials. Early detection of fungal growth would permit the use of relatively noninvasive treatments to remediate fungal contamination of artifacts before visible or lasting damage has occurred. Current methods used for the detection of microbial biomass, such as colony counts, microscopic biovolume estimation, and ergosterol analysis are expensive, time consuming, or are inappropriate for use with fungi. Beta-N-acetylhexosaminidase (EC 3.2.1.52) activity provides a rapid and reliable means of fungal detection on a variety of cultural heritage materials. Adapted for use on archival materials, fluorogenic 4-Methylumbelliferyl (MUF) labeled substrate N-acetyl-Beta-D-glucosamine (NAG) was used to detect fungal beta-N-acetylhexosaminidase activity. The fluorescence generated by minute quantities of fungi was quickly detected at an early stage of growth. The sensitivity of the assay was comparable to other biochemical techniques. The fluorometric assay was well-suited for early detection of fungal biomass on paper and assessment of the effectiveness of common remediation practices.  相似文献   

6.
The ASTM D6819-02e3 standard for testing the accelerated ageing of paper, published in 2002, recommends using closed glass vials in order to keep the degradation products in contact with the paper and thus permitting a better simulation of the natural ageing conditions inside closed books. In the present study, the actual conditions and their stability inside closed vessels have been evaluated. The necessity of assuring a very high sealing performance (tightness) of the systems in order to avoid leakage of water vapour is the main drawback of this ageing method. Systematic studies presented in this publication tried to monitor this tightness and have provided data that helped to answer the question of what circumstances could lead to achieving its improvement. Both gravimetric monitoring of water content in vials and “in situ” IR measurements of the aged paper humidity have been applied for this purpose. As a result, better sealing materials (gaskets and caps) than those recommended by the ASTM standard, have been found. Additionally, application of a dynamometric spanner for closing the vials is recommended, as this is a guarantee of reasonably high and recurring tightness of the systems used in tests. Nevertheless, the systematic, linear with time, loss of moisture for all used vials was observed. A 9% loss of the initial moisture content in samples of the aged paper was observed for the tested conditions (14 days at 90 °C). Therefore, it seems that including some kind of gravimetric control for ageing tests performed in closed vessels is of essential importance.Kinetic studies of accelerated ageing in both closed and open systems, as monitored by DP and breaking length measurements, unexpectedly show that no statistically meaningful difference of degradation rates can be observed. On the other hand, the pH and whiteness index values reveal a meaningful difference between the rates of ageing in these systems, thus confirming the basic assumption of the ASTM test concerning the interaction of paper degradation products with the paper itself.  相似文献   

7.
The aim of the work is to set up a methodological approach to verify the effectiveness of the treatments of decayed waterlogged archaeological wood and to point out the proper thermo-hygrometric conditions for its preservation after treatment. The treatments were performed on wood samples of maritime pine (Pinus pinaster Aiton), oak (Quercus sp. caducifolia), elm (Ulmus cf. minor) and strawberry tree (Arbutus unedo L.), obtained from stems pertaining to the original vegetation found in the excavation site of the Ancient Ships in Pisa (Italy), and dated from seventh century BC to second century AD The utilised products were: Polyethylene Glycols (PEG) of various molecular weights, a Polypropylene Glycol (PPG 425), Trehalose (α-D-glucopyranosyl-α-D-glucopyranoside), and their mixtures, and also a Hydroxypropylcellulose (Klucel). The main objective to be pursued by the treatments was considered the stabilisation of the original size and shape of samples. The various steps of this approach were: the execution of a preliminary diagnostic survey on untreated samples; the characterisation of treatment solutions ‘as such’ to establish the property to be monitored during the treatment; the evaluation of the main physical characteristics of wood after the treatment were determined. Among the latter, the coefficient of dimensional stability during the exposure to a series of selected thermo-hygrometric conditions and the retention of consolidants after the treatment. These two measurements allowed the definition of the ‘efficacy of a treatment’, φT, a new parameter firstly utilised in this work. It measures the stabilisation capability of the percent unit of retained product, and its value permits to put in evidence the consolidants that stabilise wood with the lowest amount of product. Conversely, it was not possible to measure the Anti-Shrink Efficiency (ASE), one of the most utilised parameters for the evaluation of treatments, because of the serious distortions and fractures observed in all the heavily degraded untreated samples.  相似文献   

8.
For conservation of the built cultural heritage, the application of conservation products like consolidants or water repellents is often suggested. Their impregnation depth is a key factor for the assessment of the treatment efficiency. It will vary depending on the internal structure of the stone material and the properties of the conservation products. In this study a porous bioclastic limestone from Maastricht (the Netherlands) and a porous sandstone of Bray (Belgium) were selected for treatment with either ethylsilicate-based consolidant products or siloxane-based water repellents. We explore the potential of neutron radiography to visualize the conservation products after polymerization, since previous experiments already proved their detectability before polymerization. Additionally, water absorption by capillarity was monitored inside the samples. The experiments in this study illustrate that the ethylsilicate-based consolidants remained visible for neutrons even after the polymerization process, while the siloxane-based water repellents can only clearly be distinguished in the stone as long as they contain a certain amount of solvent. The study proves that neutron radiography can provide important additional information for the research in the built cultural heritage domain, especially as it allows to successfully visualize the impregnation depth of silicate-based consolidants inside natural building stones.  相似文献   

9.
This study is aimed at an assessment of the properties of two polymeric products applied to Norway spruce (Picea abies) and White poplar (Populus alba) wood species. It contributes to ongoing research experiments on the consolidating properties of two synthetic resins and their potential synergic action on wood, resulting from their different interaction with the substrate: Paraloid B72 and Regalrez 1126. Experiments were carried out on a series of samples of the two wood varieties. The consolidants were applied alone and one after the other, with one coat of Regalrez and then one of Paraloid. Porosity and variations in pore size distribution were ascertained by mercury intrusion porosimetry (MIP). Colorimetric and IR spectroscopic measurements were also taken before and after aging by solar radiation and freeze/thaw cycles, to verify the possible slowing of photodegradation of the treated wood and the consolidating resistance. Results confirm that both products penetrate the wood with a different behaviour. After double treatment with Regalrez + Paraloid, a significant advantage was observed in terms of mechanical resistance and pore size distribution, although no advantages as regards resistance to photo-oxidizing processes or colour changes were observed.  相似文献   

10.
The present study dealt with the characterisation of marble surfaces coated by three kinds of polymeric material usually employed in stones conservation and with the evaluation of the removal of these coatings from the surfaces by means of new nanocontainer aqueous systems constituted of micellar solutions (MS) and oil-in-water microemulsions (MC). The polymeric coatings were also subjected to accelerated artificial ageing in order to detect possible effects associated to natural photochemical ageing. The aim of the work was the assessment of the performance of such nanocontainer aqueous systems taking acetone (Ac) as a reference “traditional” solvent for the removal procedure. The characterisation was carried out by means of Scanning Electron Microscopy (SEM) and Environmental Scanning Electron Microscopy (ESEM), Fourier Transform Infra-Red (FTIR) and Nuclear Magnetic Resonance (NMR) spectroscopies and the results obtained showed that the performance of these innovative methods based on nanocontainer aqueous systems can be considered highly promising in the view of a “green approach” to the conservation of cultural heritage.  相似文献   

11.
A new conservation process was developed for archaeological iron-wood artefacts. Metal part protection was achieved by adding a corrosion inhibitor (Hostacor IT®) in the polyethylene glycol (PEG) soaking solutions. Nevertheless, a significant microbiological growth was observed in the baths and around the objects. From the different soaking solutions, 23 bacterial strains and 12 strains of filamentous fungi were isolated. Adding compatible biocide has been absolutely essential to allow the PEG and Hostacor IT® to be effective. Among biocides tested, Dowicide®A that contains sodium o-phenylphenate is the most efficient. As shown by electrochemical measurements (corrosion potential, intensity and polarization resistance), this biocide does not destabilize the formation of protective film created by Hostacor IT®. There is no competition of adsorption between Hostacor IT® and Dowicide®. In the presence of Dowicide®, Hostacor IT® acts more quickly and in a significant way.At the concentration of 3000 ppm, Dowicide® is effective to protect the aqueous solutions of PEG 400+ Hostacor IT® from the development of the selected microorganisms. Adding the biocide at the beginning of the object impregnation was the most effective way to prevent bacterial and fungal growth. Tests in real conditions showed that after two months of impregnation, solutions reminded clear and no biofilm was observed around artefacts.  相似文献   

12.
The damage to historical documents and books caused by the acidic character of paper is often manifested as a complete loss of their mechanical properties. Deacidification and restoration of archived paper objects require knowledge of the long-term behaviour of paper before and after repair actions. Our study was focused on the investigation of mechanical properties (tensile strength, stretch, tensile index, zero-span tensile strength, folding endurance) of original papers (one alkaline and three different acidic samples) exposed to five methods of dry-heat and moist-heat accelerated ageing. The degree of paper deterioration upon ageing was significantly influenced by the temperature and relative humidity, along with the intrinsic chemistry of the individual paper samples. The correlation matrix evaluated at a 95% confidence level for tensile strength, stretch, tensile index and zero-span showed linear correlations between these mechanical properties for all the paper samples. However, a linear dependence of folding endurance on zero-span tensile strength was found only for alkaline paper, which revealed the highest resistance to the accelerated ageing tests. In addition, the concentration of paramagnetic semiquinone species in the acidic lignin-containing paper samples was monitored by Electron paramagnetic resonance spectroscopy.  相似文献   

13.
Correct interventions on cultural heritage should have as their starting point an accurate diagnosis of its health, in order to design a compatible care. NDTs seem to offer a promising way in this sense. This paper deals with the combined use of IRT and LDV for the investigation of historical thin vaults made by timber arches, reeds, and plaster and it demonstrates that they can effectively support a deeper knowledge of these vaults as it concerns the presence of detached areas among the different mortar layers of the plaster and of detached areas among the mat of reeds and the nailed connection with the wooden bearing elements. This is a very important goal because these ND methodologies can be employed only on the lower surface of these vaults and sufficiently far from it, and they do not have any mechanical interaction with the historical, eventually frescoed or stuccoed, plaster, thus saving money and time.  相似文献   

14.
  相似文献   

15.
This paper aims to view the implications of an identification of wood species found during an archaeological excavation on a medieval church building and a surrounding graveyard at Thorarinsstadir in Seydisfjordur, east Iceland. The excavation in Seydisfjördur is a part of a project entitled ‘The transition from paganism to Christianity in Iceland’ sponsored by The East Iceland Heritage Museum, the Research Council of Iceland and The European Commission. It started in 1997 and from 1998 it has been a part of the PARABOW project, in the frame of the Raphael project. The project involves archaeological researches on pagan and Christian remains from the early medieval times in Iceland. The aim is to examine the origin and development of the Christian religion in Iceland. Furthermore, it is the intention to investigate how Christianity evolved alongside paganism assuming the conversion to Christianity was a long process, climaxing in the year 1000 when Christianity was adopted as a national religion. The wood identification uncovered evidence concerning church architecture, limiting actors for building traditions, Icelandersˈ ritual practices as well as their contacts with the foreign countries during the Viking Age and early medieval times. It did show that the native species were mainly used as fuel but drift timber was probably mainly used for construction purposes and for making coffins. According to the results from the wood identification, for instance, the excavation at Thorarinsstadir in Seydisfjördur revealed a wooden church made of drift timber.  相似文献   

16.
As part of a working definition of a new code of practice, this paper develops a methodology to determine the suitability of plasters manufactured on-site to protect the earthen walls of vernacular architecture buildings. Given the diversity of raw earth construction types, ranging from massive earth to stone masonry with earth mortars, and the variability of the materials used, two on-site tests (a shrinkage test followed by a shear test) were proposed. Those tests, as well as additional tests, were performed with lime/sand, earth/sand and earth with plaster admixtures. Lime/sand plasters do not typically pose shrinkage issues, which is why more earth based specimens were tested than lime based specimens. An analysis of the on-site testing complemented with laboratory tests reveals an antagonistic control of the bond between earth plaster and earthen wall based on clay content: an increase in the plaster clay content leads to increased bending strength, which strengthens the plaster and increased shrinkage, which weakens the plaster-wall interface. The heterogeneity of the wall leads to a wide range of results; therefore, this study was conducted to validate the formulation of plasters by means of shrinkage and shear tests at five different points on the wall. The shrinkage test allows finding the earth plaster formulations. Among all the validated formulations, the mason chooses the best one thanks to two criteria: the best workability (which is variable according to masons) with the highest clay content as possible. Then, when the formulation is chosen, the shear test must be done to verify if the bond between the plaster and the wall is high enough. This series of tests allows masons to validate formulations that will ensure good mechanical resistance of the plasters that protect buildings of vernacular earthen architecture.  相似文献   

17.
This work shows the capability of principal component analysis (PCA) to detect molecular, chemical and mineralogical changes in historic painting materials subjected to a thermal ageing test (< 250 °C). To simulate the heat-induced alterations an ageing accelerated process was performed on two sets of samples containing two mineral phases (hydroxyapatite and quartz) and two organic compounds (collagen and albumin). The chosen minerals behaved as internal standards during the tests since they are stable and chemically inert at the tested temperatures. Raman microscopy (RM) was applied to characterise one set of samples made of bone, containing ca. 70% hydroxyapatite and 30% collagen. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy was used to study the other set of samples made of four different quartz/albumin mixtures with quartz contents of 30%, 50%, 70% and 90% (w/w). The aim was to identify the ideal proportion of internal standard to be validated by ATR-FTIR and PCA, determined to be 70%. PCA analyses detected changes in the molecular structures of the organic components while the internal mineral standard remained stable. Moreover, the internal standard IR/Raman bands were constant during the tests and confirmed that the results of PCA analyses were independent of instrumental and technical factors, as well as sample collecting and handling. This demonstrates the potential benefits of our approach to study historical painting materials, which have suffered any type of heat-induced alteration.  相似文献   

18.
Plasterwork, a very typical element of Islamic art, comprises highly artistic decorative elements on wall, arches, and vaults. Due to their gypsum composition, such elements are easily weathered, primarily because of low mechanical strength and slight solubility in water. This work has studied the traditional Islamic plasterwork in the halls and patios of the Mudéjar Palace (13–16th centuries) in the Real Alcázar of Seville. This palace complex was declared a World Heritage Site by UNESCO in 1987. The analysis of its porosity and shore C surface hardness has allowed determination of the mathematical correlation between them. Consequently, future evaluations can merely measure the hardness (a non-destructive test) to estimate the plasterwork's porosity (which reveals its mechanical strength and its degree of weathering). These elements must be maintained in order to prevent the spread of pathologies. In addition to requiring an in-depth knowledge of its materials, application techniques, and properties, to do so also demands simple techniques for regular assessments and criteria to prioritize interventions if they become necessary.  相似文献   

19.
Stone consolidation is one of the major restoration treatments used for historical monuments preservation. A natural stone is a complicated heterogeneous porous system making the process of consolidation dependent on many variables. In practical restoration aims, for a given stone type, the selection of a suitable consolidant and consolidation conditions therefore remains a complex issue. The impregnation depth is a key factor for the assessment of the treatment efficiency. The combination of state-of-the-art hybrid pixel semiconductor detectors with newly available micro-focus X-ray sources makes possible to apply X-ray radiography, an ideal non-destructive tool, for penetration depth monitoring. In this study, high-resolution X-ray radiography is used for monitoring the penetration depth of organosilicon consolidants in the Opuka stone. The penetration depth has been evaluated in relation to the time of consolidation, stone porosity and consolidation mixtures properties. The exact influence of the X-ray contrast agent on the consolidation depth has been investigated as well. The information obtained provides supplementary knowledge on the suitability of investigated products for the treatment of this type of stone. In our study, the capabilities of X-ray radiography have been demonstrated on X-ray radiography simple projections, high-resolution computed tomography (CT) as well as on the dynamic processes monitoring. The results thus can serve also as an instrumental and methodological example applicable for consolidation monitoring of other stone types.  相似文献   

20.
An empirical exploration of global film franchises provides insights for managers of film franchises, investors in franchisable products, and scholars interested in motion picture performance. Performance tends to deteriorate as extensions are introduced: production budgets rise, advertising expenditures remain similar, and the number of opening-weekend theaters experiences a jump with the first sequel and then remains similar in subsequent installments. However, revenue, return-on-investment (ROI) and audience and critical reviews fall, and foreign performance becomes increasingly important. Offsetting deteriorating performance, risk falls: revenue and ROI become more predictable. An early change in the lead actor causes reduced performance, but changes in key product characteristics and inputs in later installments help prolong the franchise. ROI of the current installment is the most critical financial determinant of whether a further extension will occur, but high-budget films and those with higher domestic share of revenue are also more likely to yield further extensions.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号