共查询到20条相似文献，搜索用时 156 毫秒
1.
Ten slender steel reinforced cencrete (SRC) composite columns are tested under eccentric loading conditions.Effects of concrete strength, slenderness of columns and eccentricity of the axial load are studied. The load-carrying capacity is reduced with increased slenderness ratio and eccentricity. Concrete strength has no obvious influence on eccentrically loaded columns. Then, a nonlinear numerical method of pin-ended slender columns is also presented. This method is applicable for determining the material failure load or buckling failure load of a slender steel reinforced concrete composite column. In this method both material and geometric nonlinearities are taken into account. The results of numerical analysis accord well with the test results. The test results are also compared with the results predicted by ACI318-05 and the China Specifications. 相似文献
2.
Numerical Simulation of Dynamic Response and Collapse for Steel Frame Structures Subjected to Blast Load 总被引：4，自引：0，他引：4
The progressive collapse of steel frame structures under the blast load was investigated using LS-DYNA. The multi-material Eulerian and Lagrangian coupling algorithm was adopted. A flu-id-structure coupling finite element model was established which consists of Lagrange element for simulating steel frame structures and concrete ground, multiple ALE element for simulating air and TNT explosive material. Numerical simulations of the blast pressure wave propagation, struc-tural dynamic responses and deformation, and progressive collapse of a five-story steel frame structure in the event of an explosion near above ground were performed. The numerical analysis showed that the Lagrangian and Eulerian coupling algorithm gave good simulations of the shock wave propagation in the mediums and blast load effects on the structure. The columns subjected to blast load may collapse by shear yielding rather than by flexural deformation. The columns and joints of steel beam to column in the front steel frame structure generated enormous plastic defor-mation subjected to intensive blast waves, and columns lost carrying capacity, subsequently lead-ing to the collapse of the whole structure. The approach coupling influence between struc-tural deformation and fluid load well simulated the progressive collapse process of structures, and provided an effective tool for analyzing the collapse mechanism of the steel frame structure under blast load. 相似文献
3.
The progressive collapse of steel frame structures under the blast load was investigated using LS-DYNA.The multi-material Eulerian and Lagrangian coupling algorithm was adopted.A fluid-structure coupling finite element model was established which consists of Lagrange element for simulating steel frame structures and concrete ground,multiple ALE element for simulating air and TNT explosive material.Numerical simulations of the blast pressure wave propagation,structural dynamic responses and deformation,and progressive collapse of a five-story steel frame structure in the event of an explosion near above ground were performed.The numerical analysis showed that the Lagrangian and Eulerian coupling algorithm gave good simulations of the shock wave propagation in the mediums and blast load effects on the structure.The columns subjected to blast load may collapse by shear yielding rather than by flexural deformation.The columns and joints of steel beam to column in the front steel frame structure generated enormous plastic deformation subjected to intensive blast waves,and columns lost carrying capacity,subsequently leading to the collapse of the whole structure.The approach coupling influence between structural deformation and fluid load well simulated the progressive collapse process of structures,and provided an effective tool for analyzing the collapse mechanism of the steel frame structure under blast load. 相似文献
4.
In Order to reduce economic and life losses due to terrorism or accidental explosion threats,reinforced concrete(RC)slabs of buildings need to be designed or retrofitted to resist blast loading.In this paper the dynamic behavior Of RC slabs under blast loading and its influencing factors are studied.The numerical model of an RC slab subjected to blast loading is established using the explicit dynamic analysis software.Both the strain rate effect and the damage accumulation are taken into account in the material model.The dynamic responses of the RC slab subiected to blast loading are analyzed,and the influence of concrete strength,thickness and reinforcement ratio on the behavior of the RC slab under blast loading iS numerically investigated.Based on the numerical results.some principles for blast-resistant design and retrofitting are proposed to improve the behavior of the RC slab subjected to blast loading. 相似文献
5.
Evaluation of blast-resistant performance predicted by damaged plasticity model for concrete 总被引：2，自引：0，他引：2
In order to evaluate the capacity of reinforced concrete (RC) structures subjected to blast loadings,the damaged plasticity model for concrete was used in the analysis of the dynamic responses of blast-loaded RC structures,and all three failure modes were numerically simulated by the finite element software ABAQUS.Simulation results agree with the experimental observations.It is demonstrated that the damaged plasticity model for concrete in the finite element software ABAQUS can predict dynamic responses and typical flexure,flexure-shear and direct shear failure modes of the blast-loaded RC structures. 相似文献
6.
Retrofitting of RC Slabs Against Explosive Loads 总被引：1，自引：0，他引：1
OEHLERS Deric John 《天津大学学报(英文版)》2006,12(Z1)
With the increase of terrorist bomb attacks on buildings, there is a need to develop advanced retrofitting techniques to strengthen structures against blast loads. Currently, several guidelines including an Australian version for retrofitting reinforced concrete (RC) structures are available for the design of retrofitting systems against seismic and monotonic loads using steel or fibre reinforced polymer (FRP) plates that can be either adhesively bonded to the surface or near surface mounted to the concrete cover. However, none of these guidelines provide advice suitable for retrofitting structures subjected to blast loads. In this paper, numerical models are used to simulate the performance of retrofitted RC slabs subjected to blast loads. Airblast pressure distributions on the surface of the slabs estimated in a previous study are used as input in the analysis. A material damage model developed previously for concrete and an elastoplastic model for steel bars are employed in this research for modelling reinforced concrete behaviour due to explosive loads. The material models and blast loading are coded into a finite element computer program LS-DYNA3D to do the analysis. With the numerical model, parametric studies are conducted to investigate RC slabs retrofitted by either externally bonded or near-surface mounted plates or GFRP sheets subjected to blast loads. Discussion is made on the effectiveness of the retrofitting system for RC slabs against blast loads. 相似文献
7.
ZHOU Xiaoqing HAO Hong KUZNETSOV Valerian A WASCHL John 《天津大学学报(英文版)》2006,12(B09):94-99
In the present paper, a dynamic plastic damage model for concrete has been employed to estimate responses of a reinforced concrete slab subjected to blast loading. The interaction between the blast wave and the concrete slab is considered in 3D simulation. In the first stage, the initial detonation and blast wave propagation is modelled in 2D simulation before the blast wave reaches the concrete slab, then the results obtained from 2D calculation are remapped to a 3D model. The calculated blast load is compared with that obtained from TM5-1300. Numerical results of the concrete slab response are compared with the explosive test carried out-in the Weapons System Division, Defence Science and Technology Organisation, Department of Defence, Australia. 相似文献
8.
In the present paper, a dynamic plastic damage model for concrete has been employed to estimate responses of a reinforced concrete slab subjected to blast loading. The interaction between the blast wave and the concrete slab is considered in 3D simulation. In the first stage, the initial detonation and blast wave propagation is modelled in 2D simulation before the blast wave reaches the concrete slab, then the results obtained from 2D calculation are remapped to a 3D model. The calculated blast load is compared with that obtained from TM5-1300. Numerical results of the concrete slab response are compared with the explosive test carried out- in the Weapons System Division, Defence Science and Technology Organisation, Department of Defence, Australia. 相似文献
9.
Under extreme loading condition,a shelter will provide a safe place to protect people from injury caused by blast wave and fragments.In order to save resource and reuse waste materi-als,a new design concept for blast protection shelter was explored.The new construction was composed of I-section steel panel or C-channel steel panel filled with recycled concrete aggregate.The compaction process of the recycled concrete aggregate filled in the steel construction was ex-perimentally investigated.A single storey shelter based on the proposed design concept was nu-merically simulated by using LS-DYNA software.In the 3D numerical model,three walls were de-signed using I-section steel and one wall using C-channel steel,and all of the four walls were filled with recycled concrete aggregate.The penetration analysis was done by using ConWep.Some penetration tests were also carried out by using a gas gun.It is found that the proposed shelter based on the design concept is effective for blast protection. 相似文献
10.
Two numerical simulations were performed to investigate the protective effect of the foam cladding. One simulation is based on a previous experimental study, which is a ballistic pendulum with and without a foam cladding subjected to close-range blast loading. The other model is a steel beam with and without a foam cladding under blast loading. The overpressure due to the blast event can be calculated by the empirical function ConWep or by an arbitrary Lagrangian-Eulerian (ALE) coupling model. The first approach is relatively simple and widely used. The second approach can model the propagation of the blast wave in the air and the interaction between the air and the solid. It is found that the pendulum with the foam cladding always swings to a larger rotation angel compared to a bare pendulum. However, the steel beam with an appropriate foam cladding has a smaller deflection compared to the bare beam without a foam cladding. It is concluded that the protective effect of the foam cladding depends on the properties of the foam and the protected structure. 相似文献
11.
因为异形柱经常承受偏心受压加受扭的复杂受力,所以理论计算比较复杂。本研究使用有限元分析软件ABAQUS对T形截面型钢混凝土柱的抗扭性能进行了数值模拟分析,并考虑混凝土塑性发展探讨不同轴压比与钢骨率对型钢混凝土T形截面柱延性与抗扭承载力的影响。利用已有的实验数据,建立构件的受压有限元模型,通过对比荷载-位移曲线验证有限元材料本构的有效性。建立三组模型分析不同轴压比与钢骨率对构件抗扭力学性能的影响,为今后型钢混凝土异形柱的应用提供参考。 相似文献
12.
Dong-ming Yan Hua-wei Yin Cheng-lin Wu Yan-long Li Jason Baird Gen-da Chen 《浙江大学学报(A卷英文版)》2016,17(9):689-701
In this study, two full-size concrete walls were tested and analyzed to demonstrate the effectiveness of a chemically reactive enamel (CRE) coating in improving their mechanical behavior under blast loading: one with CRE-coated rebar and the other with uncoated rebar. Each wall was subjected in sequence to four explosive loads with equivalent 2, 4, 6-trinitrotoluene (TNT) charge weights of 1.82, 4.54, 13.6, and 20.4 kg. A finite element model of each wall under a close-in blast load was developed and validated with pressure and strain measurements, and used to predict rebar stresses and concrete surface strain distributions of the wall. The test results and visual inspections consistently indicated that, compared with the barrier wall with uncoated reinforcement, the wall with CRE-coated rebar has fewer concrete cracks on the front and back faces, more effective stress transfers from concrete to steel rebar, and stronger connections with its concrete base. The concrete surface strain distributions predicted by the model under various loading conditions are in good agreement with the crack patterns observed during the tests. 相似文献
13.
GONG Shunfeng LU Yong GAO Feng JIN Weiliang 《天津大学学报(英文版)》2006,12(B09):248-253
For a building structure subjected to impulsive loading, particularly shock and impact loading, the response of the critical columns is crucial to the behaviour of the entire system during and after the blast loading phase. Therefore, an appropriate evaluation of the column response and damage under short-duration impulsive loading is important in a comprehensive assessment of the performance of a building system. This paper reports a dynamic analysis approach for the response of RC columns subjected to impulsive loading. Considering that the dynamic response of a column in a frame structure can also be affected by the floor movement which relates to the global vibration of the frame system, a generic column-mass model is used, in which a concentrated mass is attached to the column top to simulate the effect of a global vibration. To take into account the high shear effect under impulsive load, the model is formulated using Timoshenko beam theory, and three main nonlinear mechanisms are considered. Two typical scenarios, one under a direct air blast loading, and another under a blast-induced ground excitation, are analyzed and the primary response features are highlighted. 相似文献
14.
为研究偏心距对钢-连续纤维复合筋(SFCB)混凝土柱的受压性能,对7根混凝土强度等级为C35的SFCB混凝土柱进行静力受压试验,其中纵筋采用内芯钢筋6mm外包BFRP的SFCB。分析了偏心距对试件承载力、挠度、裂缝及破坏形态的影响。研究表明,偏心距越大,柱中挠度越大,最大裂缝宽度越大,极限承载力越小。 相似文献
15.
For a building structure subjected to impulsive loading, particularly shock and impact loading , the response of the critical columns is crucial to the behaviour of the entire system during and after the blast loading phase. Therefore, an appropriate evaluation of the column response and damage under short-duration impulsive loading is important in a comprehensive assessment of the performance of a building system. This paper reports a dynamic analysis approach for the response of RC columns subjected to impulsive loading. Considering that the dynamic response of a column in a frame structure can also be affected by the floor movement which relates to the global vibration of the frame system, a generic column-mass model is used, in which a concentrated mass is attached to the column top to simulate the effect of a global vibration. To take into account the high shear effect under impulsive load, the model is formulated using Timoshenko beam theory, and three main nonlinear mechanisms are considered. Two typical scenarios, one under a direct air blast loading, and another under a blast-induced ground excitation, are analyzed and the primary response features are highlighted. 相似文献
16.
The earthquake-resistant property of reinforced concrete members depends on the interaction between reinforcing bars and surrounding concrete through bond to a large degree,In this paper a general system aimed at dealing with the failure analysis of reinforced concrete columns strengthened with carbon-fiber-reinforced plastic(CFRP) sheets including bond-slip of the anchored reinforcing bars at the foot of the columns is presented.It is based on the yield design theory with a mixed modeling of the structue,according to which the concrete material is treated as a classical two-dimensional continuum ,whereas the longitudinal reinfocing bars are regarded as one-dimensional rods including bond-slip at the foot of the columns,In shear reinforced zones both the shear CFRP sheets and transvers reinforcing bars are incorporated in the analysis throuth a homogenization procedure and they are only in tesion ,The approach is then implemented numerically by means of the finite-element formulation,The numerical procedure produces accurate estimates for the loading-carrying capactiy of the shear members taken as an illustrative application by correlation with the experimental results,so the proposed approach is valid. 相似文献
17.
The tests of box-type structures under internal-blast loading are carried out. Then a numerical analysis of the test structures is done using a fully coupled numerical finite element model. The break-up process of the structure is simulated. The failure modes of the simulated structure agree well with the experimental results. The effects of the size of the reinforcing bars and the detailing of connections among the rebars in the concrete on the throw velocity of the fragments are discussed. 相似文献
18.
Shear failure in panel zones and plastic hinges in steel beams are the two major failure modes of connections between concrete-filled steel tubular(CFST) columns and steel beams. To investigate the behavior of this type of connection in both modes,two through-diaphragm connections were tested under cyclic and monotonic loadings and the load-carrying capacity,ductility,and strength of degradation of connections were discussed. Using ABAQUS software,we developed nonlinear finite-element models(FEMs) to simulate the load-carrying capacity and failure modes of the connections under monotonic loading. The finite-element(FE) analysis and test results showed reasonable agreement for the through-diaphragm connections,which confirms the accuracy of FEMs in predicting the load-carrying capacity and failure modes of connections. Based on the validated FEM,a parametric study was then conducted to investigate the infl uence of the thicknesses of the tube and diaphragm on the load-carrying capacity and failure modes of these connections. The results indicate that the strength,stiff ness,and load-carrying capacity are infl uenced less by the thickness of the diaphragm,and more by the thickness of the steel tube. According to the FE analysis results,it can be found that the critical condition between the two failure modes is determined by the shear resistance and bending resistance. 相似文献
19.
Current practice in analysis and design of blast doors subjected to blast loading considers only simple boundary conditions and material properties. The boundary conditions and material properties, in fact, have considerable influence on the response of blast doors subjected to blast loading. In this paper, the dynamic responses of a reinforced concrete arched blast door under blast loading were analyzed by the finite element program ABAQUS, combined with a previously developed elasto-viscoplastic rate-sensitive material model. And the effect of the surrounding rock mass and contact effect of the doorframe were also taken into account in the simulation. It is demonstrated that the strain-rate effect has considerable influence on the response of reinforced concrete blast door subjected to blast loading and must be taken into account in the analysis. 相似文献
20.
孙翠兰 《河北工业大学成人教育学院学报》2007,22(4):49-52,62
轻钢骨混凝土结构是一种新型的结构体系,它自重轻,安装方便,保温性能好,因而有广阔的发展余地和使用空间。本文分别对轻钢骨模网混凝土的工作性能、轻钢骨剪力墙的抗剪性能做了深入的理论研究。用3片缩尺轻钢骨剪力墙模型进行了试验研究,并推导了轻钢骨剪力墙的抗剪承载力公式。由于模型试验构件少,数据有所不足,本文又采用ADINA有限元分析软件进行分析,提出有关轻钢骨砼剪力墙轴压比设计的建议。 相似文献