首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 322 毫秒
1.
  相似文献   

2.
The aim of this study was to examine lower limb joint kinetics during the block and first stance phases in athletic sprinting. Ten male sprinters (100 m PB, 10.50 ± 0.27 s) performed maximal sprint starts from blocks. External force (1000 Hz) and three-dimensional kinematics (250 Hz) were recorded in both the block (utilising instrumented starting blocks) and subsequent first stance phases. Ankle, knee and hip resultant joint moment, power and work were calculated at the rear and front leg during the block phase and during first stance using inverse dynamics. Significantly (P < 0.05) greater peak moment, power and work were evident at the knee joint in the front block and during stance compared with the rear block. Ankle joint kinetic data significantly increased during stance compared with the front and rear block. The hip joint dominated leg extensor energy generation in the block phase (rear leg, 61 ± 10%; front leg, 64 ± 8%) but significantly reduced during stance (32 ± 9%), where the ankle contributed most (42 ± 6%). The current study provides novel insight into sprint start biomechanics and the contribution of the lower limb joints towards leg extensor energy generation.  相似文献   

3.
Abstract

This study analysed the first stance phase joint kinetics of three elite sprinters to improve the understanding of technique and investigate how individual differences in technique could influence the resulting levels of performance. Force (1000 Hz) and video (200 Hz) data were collected and resultant moments, power and work at the stance leg metatarsal-phalangeal (MTP), ankle, knee and hip joints were calculated. The MTP and ankle joints both exhibited resultant plantarflexor moments throughout stance. Whilst the ankle joint generated up to four times more energy than it absorbed, the MTP joint was primarily an energy absorber. Knee extensor resultant moments and power were produced throughout the majority of stance, and the best-performing sprinter generated double and four times the amount of knee joint energy compared to the other two sprinters. The hip joint extended throughout stance. Positive hip extensor energy was generated during early stance before energy was absorbed at the hip as the resultant moment became flexor-dominant towards toe-off. The generation of energy at the ankle appears to be of greater importance than in later phases of a sprint, whilst knee joint energy generation may be vital for early acceleration and is potentially facilitated by favourable kinematics at touchdown.  相似文献   

4.
The purpose of this study was to investigate the effect of lumbosacral kinetics on sprinting. Twelve male sprinters performed 50 m sprints at maximal effort. Kinematic and ground reaction force data were recorded at approximately 40 m from sprint commencement. A whole-body inverse dynamics approach was applied to calculate joint forces and torques at the hip and lumbosacral joints. The contribution of the hips and lumbosacral joint torques to pelvic rotation was subsequently calculated, with joint force powers indicating the rate of mechanical energy transfer between segments across joint centres calculated for both hip joints. The kinetic analysis indicated that the lumbosacral torsional torque contributed significantly to pelvic rotation. Additionally, the pelvic rotation exerted anterior–posterior joint forces on the hips, contributing to the large positive joint force power at the hip of the stance leg. These hip joint force powers assisted in motion recovery during sprinting. In conclusion, the lumbosacral torsional torque might contribute to the recovery motion in sprinting through application of the anterior–posterior joint forces at the hip joints via pelvic rotation.  相似文献   

5.
ABSTRACT

The aim of this study was to investigate the kinetic functions of the lower limbs at different hitting-point heights to provide key information for improving batting technique in baseball players. Three-dimensional coordinate data were acquired using a motion capture system (250 Hz) and ground reaction forces were measured using three force platforms (1000 Hz) in 22 male collegiate baseball players during tee-batting set at three different hitting-point heights (high, middle, and low). Kinetic data were used to calculate joint torque and mechanical work in the lower limbs by the inverse dynamics approach. The peak angular velocity of the lower trunk about the vertical axis was smaller under the low condition. The joint torques and mechanical works done by both hip adduction/abduction axes were different among the three conditions. These results indicate that hip adduction/abduction torques mainly contribute to a change in the rotational movement of the lower body about the vertical axis when adjusting for different hitting-point heights. In order to adjust for the low hitting-point height which would be difficult compared with other hitting-point heights, batters should focus on rotating the lower trunk slowly by increasing both hip abduction torques.  相似文献   

6.
ABSTRACT

Successful sprinting depends on covering a specific distance in the shortest time possible. Although external forces are key to sprinting, less consideration is given to the duration of force application, which influences the impulse generated. This study explored relationships between sprint performance measures and external kinetic and kinematic performance indicators. Data were collected from the initial acceleration, transition and maximal velocity phases of a sprint. Relationships were analysed between sprint performance measures and kinetic and kinematic variables. A commonality regression analysis was used to explore how independent variables contributed to multiple-regression models for the sprint phases. Propulsive forces play a key role in sprint performance during the initial acceleration (r = 0.95 ± 0.03) and transition phases (r = 0.74 ± 0.19), while braking duration plays an important role during the transition phase (r = ?0.72 ± 0.20). Contact time, vertical force and peak propulsive forces represented key determinants (r = ?0.64 ± 0.31, r = 0.57 ± 0.35 and r = 0.66 ± 0.30, respectively) of maximal velocity phase performance, with peak propulsive force providing the largest unique contribution to the regression model for step velocity. These results clarified the role of force and time variables on sprinting performance.  相似文献   

7.
Abstract

This study aimed to investigate the contributions of kinetic and kinematic parameters to inter-individual variation in countermovement jump (CMJ) performance. Two-dimensional kinematic data and ground reaction forces during a CMJ were recorded for 18 males of varying jumping experience. Ten kinetic and eight kinematic parameters were determined for each performance, describing peak lower-limb joint torques and powers, concentric knee extension rate of torque development and CMJ technique. Participants also completed a series of isometric knee extensions to measure the rate of torque development and peak torque. CMJ height ranged from 0.38 to 0.73 m (mean 0.55 ± 0.09 m). CMJ peak knee power, peak ankle power and take-off shoulder angle explained 74% of this observed variation. CMJ kinematic (58%) and CMJ kinetic (57%) parameters explained a much larger proportion of the jump height variation than the isometric parameters (18%), suggesting that coachable technique factors and the joint kinetics during the jump are important determinants of CMJ performance. Technique, specifically greater ankle plantar-flexion and shoulder flexion at take-off (together explaining 58% of the CMJ height variation), likely influences the extent to which maximal muscle capabilities can be utilised during the jump.  相似文献   

8.
Abstract

The metatarsal phalangeal joint (MPJ) and its crossing toe flexor muscles (TFM) represent the link between the large energy generating leg extensor muscles and the ground. The purpose of this study was to examine the functional adaptability of TFM to increased mechanical stimuli and the effects on walking, running and jumping performance.

Fifteen men performed a heavy resistance TFM strength training with 90% of the maximal voluntary isometric contraction (MVIC) for 7 weeks (560 contractions) for the left and right foot. Maximal MPJ and ankle plantar flexion moments during MVICs were measured in dynamometers before and after the intervention. Motion analyses (inverse dynamics) were performed during barefoot walking, running, and vertical and horizontal jumping. Athletic performance was determined by measuring jump height and distance.

Left (0.21 to 0.38 Nm · kg?1; P < 0.001) and right (0.24 to 0.40 Nm · kg?1; P < 0.001) MPJ plantar flexion moments in the dynamometer, external MPJ dorsiflexion moments (0.69 to 0.75 Nm · kg?1; P = 0.012) and jump distance (2.25 to 2.31 m; P = 0.006) in horizontal jumping increased significantly.

TFM responded highly to increased loading within a few weeks. The increased force potential made a contribution to an athlete's performance enhancement.  相似文献   

9.
ABSTRACT

In this study, we aimed to clarify the characteristics of neuromuscular function, kinetics, and kinematics of the lower extremity during sprinting in track and field athletes with a history of strain injury. Ten male college sprinters with a history of unilateral hamstring injury performed maximum effort sprint on an athletic track. The electromyographic (EMG) activity of the long head of the biceps femoris (BFlh) and gluteus maximus (Gmax) muscles and three-dimensional kinematic data were recorded. Bilateral comparisons were performed for the EMG activities, pelvic anterior tilt angle, hip and knee joint angles and torques, and the musculotendon length of BFlh. The activity of BFlh in the previously injured limb was significantly lower than that in the uninjured limb during the late-swing phase of sprinting (p < 0.05). However, the EMG activity of Gmax was not significantly different between the previously injured and uninjured limbs. Furthermore, during the late-swing phase, a significantly more flexed knee angle (p < 0.05) and a decrease in BFlh muscle length (p < 0.05) were noted in the injured limb. It was concluded that previously injured hamstring muscles demonstrate functional deficits during the late swing phase of sprinting in comparison with the uninjured contralateral muscles.  相似文献   

10.
Correspondence     
Abstract

Selected kinematic variables of the foot segments and the metatarsophalangeal (MTP) joint were investigated in relation to sprinting performance among 100 m sprint athletes at the 2000 Summer Olympic Games. It was hypothesized that the kinematics of the MTP joint, and forefoot and rearfoot segments, are related to sprint performance for both male and female athletes. Kinematic sagittal plane data were collected using two digital video cameras recording at 120 fields per second. It was determined that faster male sprinters experienced higher maximal rates of MTP extension, and faster female sprinters touch down with higher posterior sole angles and take off with lower posterior sole angles.  相似文献   

11.
Abstract

The purpose of this study was to capture the lower limb kinematics before during and after ball impact of soccer kicking by examining the influence of both sampling rate and smoothing procedures. Nine male soccer players performed maximal instep kicks and the three-dimensional leg movements were captured at 1000 Hz. Angular and linear velocities and accelerations were determined using four different processing approaches: processed using a modified version of a time-frequency filtering algorithm (WGN), smoothed by a second-order low-pass Butterworth filter at 200 Hz cut-off (BWF), re-sampled at 250 Hz without smoothing (RSR) and re-sampled at 250 Hz but filtered by the same Butterworth filter at 10 Hz cut-off (RSF). The WGN approach appeared to establish representative kinematics, whereas the other procedures failed to remove noisy oscillation from the baseline of signal (BWF), lost the peaks of rapid changes (RSR) or produced totally distorted movement patterns (RSF). The results indicate that the procedures used by some previous studies may have been insufficient to adequately capture the lower limb motion near ball impact. We propose a new time-frequency filtering technique as a better way to smooth data whose frequency content varies dramatically.  相似文献   

12.
ABSTRACT

Many sports demand high forces at high movement speeds. Joint power combines these two measures and is frequently analyzed by isokinetic tests. However, various concepts of assessing joint power lead to conflicting results. The aim was to examine different methods to calculate peak power during isokinetic knee tests of sixty-one healthy male participants (20 y, 182 cm, 76 kg). Unilateral movements of the eccentrically working hamstrings and the concentrically working quadriceps at 150°/s were captured by high-speed cameras. Peak power derived from isokinetic data was significantly higher (p < 0.01, d > 1.54) compared to the camera-based kinematic procedures. To achieve best accuracy, peak power should be derived from the camera-based joint angular velocity and the measured moment at time of peak power during the dynamometer’s isokinetic range of motion. A meaningful assessment of isokinetic joint power should incorporate a camera-based kinematic analysis to account for potential measuring inaccuracies owing to anatomical features, axis misalignment, and tissue deformation.  相似文献   

13.
The aim of this study was to examine the biomechanical injury risk factors at the wrist, including joint kinetics, kinematics and stiffness in the first and second contact limb for parallel and T-shape round-off (RO) techniques. Seven international-level female gymnasts performed 10 trials of the RO to back handspring with parallel and T-shape hand positions. Synchronised kinematic (3D motion analysis system; 247 Hz) and kinetic (two force plates; 1235 Hz) data were collected for each trial. A two-way repeated measure analysis of variance (ANOVA) assessed differences in the kinematic and kinetic parameters between the techniques for each contact limb. The main findings highlighted that in both the RO techniques, the second contact limb wrist joint is exposed to higher mechanical loads than the first contact limb demonstrated by increased axial compression force and loading rate. In the parallel technique, the second contact limb wrist joint is exposed to higher axial compression load. Differences between wrist joint kinetics highlight that the T-shape technique may potentially lead to reducing these bio-physical loads and consequently protect the second contact limb wrist joint from overload and biological failure. Highlighting the biomechanical risk factors facilitates the process of technique selection making more objective and safe.  相似文献   

14.
This study investigated changes in performance and technique that occur during maximal effort bend sprinting compared with straight-line sprinting under typical outdoor track conditions. Utilising a repeated measures design, three-dimensional video analysis was conducted on seven male sprinters in both conditions (bend radius: 37.72 m). Mean race velocity decreased from 9.86 to 9.39 m/s for the left step (p = 0.008) and from 9.80 to 9.33 m/s for the right step (p = 0.004) on the bend compared with the straight, a 4.7% decrease for both steps. This was mainly due to a 0.11 Hz (p = 0.022) decrease in step frequency for the left step and a 0.10 m (p = 0.005) reduction in race step length for the right step. The left hip was 4.0° (p = 0.049) more adducted at touchdown on the bend than the straight. Furthermore, the bend elicited significant differences between left and right steps in a number of variables including ground contact time, touchdown distance and hip flexion/extension and abduction/adduction angles. The results indicate that the roles of the left and right steps may be functionally different during bend sprinting. This specificity should be considered when designing training programmes.  相似文献   

15.
Abstract

The aim of this study was to test the hypothesis that sprint performance (time over a given distance) would be affected by track compliance, with better performances on the more compliant surface. Ten sprinters participated in the study. The athletes performed maximal sprints (60 m) on three different track configurations (hard, 5500 kN · m?1; soft, 2200 kN · m?1; spring, 550 kN · m?1). A 60-m single-lane running surface was constructed. Plywood boards (1.2 cm thick) were placed on a 60 × 0.6 m wooden chipboard frame serving as the base surface. All participants ran two times on each track configuration in a randomized order. The athletes' kinematics were recorded using the Vicon 624 system with 12 cameras operating at 250 Hz. Four Kistler force plates (1250 Hz) were used to record ground reaction forces. Sprint performance (time over 60 m) was unaffected by the different track compliances (P = 0.57). In addition, there was no effect of track (P > 0.05) on the sprinting kinematics and kinetics of the ankle or knee joint. The hypothesis that sprint performance is affected by track compliance can be rejected because the sprinters recorded similar performances while sprinting over 60 m on all three track configurations. We conclude that: (1) the possible deformation of the track while sprinting is minor enough not to cause a specific adjustment in the leg mechanics affecting the effectiveness of the stretch – shortening cycle of the sprinters; and (2) the energy exchange between sprinters and tracks has only a marginal effect on sprint performance due to its small magnitude. More research on tracks with lower stiffness is required.  相似文献   

16.
The treadmill is an attractive device for the investigation of human locomotion, yet the extent to which lower limb kinematics differ from overground running remains a controversial topic. This study aimed to provide an extensive three-dimensional kinematic comparison of the lower extremities during overground and treadmill running. Twelve participants ran at 4.0 m/s ( ± 5%) in both treadmill and overground conditions. Angular kinematic parameters of the lower extremities during the stance phase were collected at 250 Hz using an eight-camera motion analysis system. Hip, knee, and ankle joint kinematics were quantified in the sagittal, coronal, and transverse planes, and contrasted using paired t-tests. Of the analysed parameters hip flexion at footstrike and ankle excursion to peak angle were found to be significantly reduced during treadmill running by 12° (p = 0.001) and 6.6° (p = 0.010), respectively. Treadmill running was found to be associated with significantly greater peak ankle eversion (by 6.3°, p = 0.006). It was concluded that the mechanics of treadmill running cannot be generalized to overground running.  相似文献   

17.
Purpose: The purpose of this study was to determine the reliability of cardiorespiratory and pelvic kinematic responses to simulated horseback riding (SHBR) and to characterize responses to SHBR relative to walking in apparently healthy children. Method: Fifteen healthy children (Mage = 9.5 ± 2.6 years) completed SHBR on a commercially available simulator at low intensity (0.27 Hz) and high intensity (0.65 Hz) during 3 sessions on different occasions. Heart rate (HR), blood pressure, and respiratory gases were measured at rest and during steady-state exercise at both intensities. Pelvic displacement was measured during steady-state exercise. Rate of energy expenditure, mean arterial pressure, and rate pressure product (RPP) were calculated. Participants also walked on a treadmill for 26.8 m/min to 80.5 m/min in 13.4-m/min increments at 0% grade during 1 session to compare cardiorespiratory responses with those of SHBR. Results: Physiological variables across all 3 SHBR sessions were similar at both intensities (p>.05 for all). Intraclass correlation coefficients (ICCs) and coefficients of variation indicate good to modest reliability of cardiorespiratory measures during SHBR (ICCs = .542–.996 for oxygen consumption, energy expenditure, and RPP). Cardiorespiratory variables, except for HR, were 2% to 19% greater, and pelvic displacement was up to 37% greater with high-intensity riding. Treadmill walking at all speeds elicited greater physiological responses compared with SHBR (p < .05). Conclusion: Cardiorespiratory responses and pelvic kinematics are reproducible with SHBR in young children, and these responses were lower than those elicited by slow treadmill walking.  相似文献   

18.
Analysis of lower limb work-energy patterns in world-class race walkers   总被引：1，自引：1，他引：0  
The aim of this study was to analyse lower limb work patterns in world-class race walkers. Seventeen male and female athletes race walked at competitive pace. Ground reaction forces (1000 Hz) and high-speed videos (100 Hz) were recorded and normalised joint moments, work and power, stride length, stride frequency and speed estimated. The hip flexors and extensors were the main generators of energy (24.5 J (±6.9) and 40.3 J (±8.3), respectively), with the ankle plantarflexors (16.3 J (±4.3)) contributing to the energy generated during late stance. The knee generated little energy but performed considerable negative work during swing (?49.1 J (±8.7)); the energy absorbed by the knee extensors was associated with smaller changes in velocity during stance (r = .783, P < .001), as was the energy generated by the hip flexors (r = ?.689, P = .002). The knee flexors did most negative work (?38.6 J (±5.8)) and the frequent injuries to the hamstrings are probably due to this considerable negative work. Coaches should note the important contributions of the hip and ankle muscles to energy generation and the need to develop knee flexor strength in reducing the risk of injury.  相似文献   

19.
Abstract

The aim of this study was to analyse lower limb joint moments, powers and electromyography patterns in elite race walking. Twenty international male and female race walkers performed at their competitive pace in a laboratory setting. The collection of ground reaction forces (1000 Hz) was synchronised with two-dimensional high-speed videography (100 Hz) and electromyography of seven lower limb muscles (1000 Hz). As well as measuring key performance variables such as speed and stride length, normalised joint moments and powers were calculated. The rule in race walking which requires the knee to be extended from initial contact to midstance effectively made the knee redundant during stance with regard to energy generation. Instead, the leg functioned as a rigid lever which affected the role of the hip and ankle joints. The main contributors to energy generation were the hip extensors during late swing and early stance, and the ankle plantarflexors during late stance. The restricted functioning of the knee during stance meant that the importance of the swing leg in contributing to forward momentum was increased. The knee flexors underwent a phase of great energy absorption during the swing phase and this could increase the risk of injury to the hamstring muscles.  相似文献   

20.
Abstract

The aim of this study was to investigate spatiotemporal and kinematic changes between the initial acceleration, transition and maximum velocity phases of a sprint. Sagittal plane kinematics from five experienced sprinters performing 50-m maximal sprints were collected using six HD-video cameras. Following manual digitising, spatiotemporal and kinematic variables at touchdown and toe-off were calculated. The start and end of the transition phase were identified using the step-to-step changes in centre of mass height and segment angles. Mean step-to-step changes of spatiotemporal and kinematic variables during each phase were calculated. Firstly, the study showed that if sufficient trials are available, step-to-step changes in shank and trunk angles might provide an appropriate measure to detect sprint phases in applied settings. However, given that changes in centre of mass height represent a more holistic measure, this was used to sub-divide the sprints into separate phases. Secondly, during the initial acceleration phase large step-to-step changes in touchdown kinematics were observed compared to the transition phase. At toe-off, step-to-step kinematic changes were consistent across the initial acceleration and transition phases before plateauing during the maximal velocity phase. These results provide coaches and practitioners with valuable insights into key differences between phases in maximal sprinting.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号