首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 824 毫秒
1.
This study investigated changes in performance and technique that occur during maximal effort bend sprinting compared with straight-line sprinting under typical outdoor track conditions. Utilising a repeated measures design, three-dimensional video analysis was conducted on seven male sprinters in both conditions (bend radius: 37.72 m). Mean race velocity decreased from 9.86 to 9.39 m/s for the left step (p = 0.008) and from 9.80 to 9.33 m/s for the right step (p = 0.004) on the bend compared with the straight, a 4.7% decrease for both steps. This was mainly due to a 0.11 Hz (p = 0.022) decrease in step frequency for the left step and a 0.10 m (p = 0.005) reduction in race step length for the right step. The left hip was 4.0° (p = 0.049) more adducted at touchdown on the bend than the straight. Furthermore, the bend elicited significant differences between left and right steps in a number of variables including ground contact time, touchdown distance and hip flexion/extension and abduction/adduction angles. The results indicate that the roles of the left and right steps may be functionally different during bend sprinting. This specificity should be considered when designing training programmes.  相似文献   

2.
Running on side-sloped surfaces is a common obstacle in the environment; however, how and to what extent the lower extremity kinematics adapt is not well known. The purpose of this study was to determine the effects of side-sloped surfaces on three-dimensional kinematics of hip, knee, and ankle during stance phase of running. Ten healthy adult males ran barefoot along an inclinable runway in level (0°) and side-sloped (10° up-slope and down-slope inclinations, respectively) configurations. Right hip, knee, and ankle angles along with their time of occurrence were analysed using repeated measures MANOVA. Up-slope hip was more adducted (p = 0.015) and internally rotated (p = 0.030). Knee had greater external rotations during side-sloped running at heel-strike (p = 0.005), while at toe-off, it rotated externally and internally during up-slope and down-slope running, respectively (p = 0.001). Down-slope ankle had greatest plantar flexion (p = 0.001). Up-slope ankle had greatest eversion compared with down-slope (p = 0.043), while it was more externally rotated (p = 0.030). These motion patterns are necessary to adjust the lower extremity length during side-sloped running. Timing differences in the kinematic events of hip adduction and external rotation, and ankle eversion were observed (p = 0.006). Knowledge on these alterations is a valuable tool in adopting strategies to enhance performance while preventing injury.  相似文献   

3.
In this study, we compared sprint kinematics of sled towing and vest sprinting with the same relative loads. Twenty athletes performed 30-m sprints in three different conditions: (a) un-resisted, (b) sled towing, and (c) vest sprinting. During sled towing and vest sprinting, external loads of 15% and 20% of body mass were used. Sprint times were recorded over 10 and 30 m. Sagittal-plane high-speed video data were recorded at 5, 15, and 25 m from the start. Relative to the un-resisted condition, sprint time increased (7.5 to 19.8%) in both resisted conditions, resulting mainly from decreased step length ( ? 5.2 to ? 16.5%) with small decreases in step frequency ( ? 2.7 to ? 6.1%). Sled towing increased stance phase duration (14.7 to 26.0%), trunk angle (12.5 to 71.5%), and knee angle (10.3 to 22.7%), and decreased swing phase duration ( ? 4.8 to ? 15.2%) relative to the un-resisted condition. Vest sprinting increased stance phase duration (12.8 to 24.5%) and decreased swing phase duration ( ? 8.4 to ? 14.4%) and trunk angle ( ? 1.7 to ? 13.0%). There were significant differences between the two resisted conditions in trunk, thigh, and knee angles. We conclude that sled towing and vest sprinting have different effects on some kinematics and hence change the overload experienced by muscle groups.  相似文献   

4.
The incidence of patellofemoral pain (PFP) is 2 times greater in females compared with males of similar activity levels; however, the exact reason for this discrepancy remains unclear. Abnormal mechanics of the hip and knee in the sagittal, frontal, and transverse planes have been associated with an increased risk of PFP. The purpose of this study was to compare the mechanics of the lower extremity in males and females during running in order to better understand the reason(s) behind the sex discrepancy in PFP. Three-dimensional kinematic and kinetic data were collected as male and female participants completed overground running trials at a speed of 4.0 m · s?1 (±5%). Patellofemoral joint stress (PFJS) was estimated using a sagittal plane knee model. The kinematics of the hip and knee in the frontal and transverse planes were also analysed. Male participants demonstrated significantly greater sagittal plane peak PFJS in comparison with the female participants (P < .001, ES = 1.9). However, the female participants demonstrated 3.5° greater peak hip adduction and 3.4° greater peak hip internal rotation (IR). As a result, it appears that the sex discrepancy in PFP is more likely to be related to differences in the kinematics of the hip in the frontal and transverse planes than differences in sagittal plane PFJS.  相似文献   

5.
This study presents the kinematics and plantar pressure characteristics of eight elite national-level badminton athletes and eight recreational college-level badminton players while performing a right-forward lunge movement in a laboratory-simulated badminton court. The hypothesis was that recreational players would be significantly different from elite players in kinematics and plantar pressure measures. Vicon® motion capture and Novel® insole plantar pressure measurement were simultaneously taken to record the lower extremity kinematics and foot loading during stance. Recreational players showed significantly higher peak pressure in the lateral forefoot (P = 0.002) and force time integral in the lateral forefoot (P = 0.013) and other toes (P = 0.005). Elite athletes showed higher peak pressure in the medial forefoot (P = 0.003), hallux (P = 0.037) and force time integral in the medial forefoot (P = 0.009). The difference in landing techniques for the lunge step between elite athletes and recreational players was observed with peak ankle eversion (?38.2°±2.4° for athletes and ?11.1°±3.9° for players, P = 0.015); smaller knee range of motion in the coronal and transverse planes, with differences in peak knee adduction (28.9°±6.8° for athletes and 15.7°±6.2° for players, P = 0.031); peak knee internal rotation (20.3°±1.3° for athletes and 11.8°±3.2° for players, P = 0.029) and peak hip flexion (77.3°±4.1° for athletes and 91.3°±9.3° for players, P = 0.037).  相似文献   

6.
The aim of this study was to examine lower limb joint kinetics during the block and first stance phases in athletic sprinting. Ten male sprinters (100 m PB, 10.50 ± 0.27 s) performed maximal sprint starts from blocks. External force (1000 Hz) and three-dimensional kinematics (250 Hz) were recorded in both the block (utilising instrumented starting blocks) and subsequent first stance phases. Ankle, knee and hip resultant joint moment, power and work were calculated at the rear and front leg during the block phase and during first stance using inverse dynamics. Significantly (P < 0.05) greater peak moment, power and work were evident at the knee joint in the front block and during stance compared with the rear block. Ankle joint kinetic data significantly increased during stance compared with the front and rear block. The hip joint dominated leg extensor energy generation in the block phase (rear leg, 61 ± 10%; front leg, 64 ± 8%) but significantly reduced during stance (32 ± 9%), where the ankle contributed most (42 ± 6%). The current study provides novel insight into sprint start biomechanics and the contribution of the lower limb joints towards leg extensor energy generation.  相似文献   

7.
ABSTRACT

The aims of this study were (a) to describe the kinematics underlying the phenomenon of the knee of the swing leg passing medially in front of the athlete during the single push (SP) phase of the block sprint start, and (b) to determine the relationships between block phase pelvis range of motion (RoM), 1st step width and block phase performance. Three-dimensional kinematic data (250 Hz) were collected from eleven competitive sprinters (100 m PB: 11.17 ± 0.41) performing maximal effort block starts. The joint angles of the rear hip with respect to the pelvis and the pelvis segment angles with respect to the laboratory coordinate system were calculated during the block start phase to the end of the 1st stance. A combination of pelvis list and rotation (not hip adduction) was coupled with the thigh of the swing leg moving medially during the SP phase. A very high positive correlation was found between pelvic list RoM and 1st step width (r = 0.799, p = 0.003). No other significant correlations were found. Attempting to reduce pelvic RoM or changing frontal and transverse plane hip joint angles to minimise medial thigh motion is unlikely to lead to an improvement to performance.  相似文献   

8.
The purpose of this study was to investigate the kinematic and metabolic effects of running on an irregular surface. We also examined how altering the frontal plane foot angle (inversion/eversion) at contact using real-time visual feedback would affect these other variables. Sixteen participants completed three running bouts lasting 5–7 minutes each on an irregular surface (IS) treadmill, a traditional smooth surface (SS) treadmill, and on SS while receiving visual feedback of the frontal plane foot angle at contact (SSF) with a goal of matching IS foot angle on SS. Frontal plane foot angle increased 40% from IS to SS (IS: 8.4 ± 4.09°, SS: 11.8 ± 4.52°, P < 0.0001, ES 1.40). Knee flexion angle at contact decreased 33% from IS to SS (IS: 9.2 ± 4.88°, SS: 6.2 ± 5.03°, P < 0.0001, ES 1.30). Rate of oxygen consumption decreased by 10% from IS to SS (IS: 37.9 ± 5.68 ml·kg?1·min?1, SS: 34.1 ± 5.07 ml·kg?1·min?1, P < 0.0001, ES 3.05). PSD of leg accelerations decreased by 38% (IS: 0.17 ± 0.07 g2/Hz, SS: 0.106 ± 0.05 g2/Hz, P < 0.000, ES 1.69). Frontal plane foot angle decreased by 14% from SS to SSF (SS: 11.8 ± 4.52°, SSF: 10.1 ± 4.42°, P = 0.027. ES 0.62) but did not result in significant changes in any other variables. There were no significant differences in shock attenuation between any conditions (IS: ?9.8 ± 2.26 dB, SS: ?9.5 ± 3.12 dB, SSF: ?9.9 ± 2.62 dB, P = 0.671). Running with greater eversion on the irregular surface may be an attempt by runners to reduce the perceived potential of an inversion ankle sprain. As a partial compensation for the decreased foot angle, runners increased knee flexion. This maintained shock attenuation but increased the rate of oxygen consumption. Altering the foot angle at contact using feedback on the SS caused the knee angle at contact to increase, but did not change shock attenuation or metabolic cost.  相似文献   

9.
We determined if performance and mechanical running alterations during repeated treadmill sprinting differ between severely hot and hypoxic environments. Six male recreational sportsmen (team- and racket-sport background) performed five 5-s sprints with 25-s recovery on an instrumented treadmill, allowing the continuous (step-by-step) measurement of running kinetics/kinematics and spring-mass characteristics. These were randomly conducted in control (CON; 25°C/45% RH, inspired fraction of oxygen = 20.9%), hot (HOT; 38°C/21% RH, inspired fraction of oxygen = 20.9%; end-exercise core temperature: ~38.6°C) and normobaric hypoxic (HYP, 25°C/45% RH, inspired fraction of oxygen = 13.3%/simulated altitude of ~3600 m; end-exercise pulse oxygen saturation: ~84%) environments. Running distance was lower (P < 0.05) in HOT compared to CON and HYP for the first sprint but larger (P < 0.05) sprint decrement score occurred in HYP versus HOT and CON. Compared to CON, the cumulated distance covered over the five sprints was lower (P < 0.01) in HYP but not in HOT. Irrespective of the environmental condition, significant changes occurred from the first to the fifth sprint repetitions (all three conditions compounded) in selected running kinetics (mean horizontal forces, P < 0.01) or kinematics (contact and swing times, both P < 0.001; step frequency, P < 0.001) and spring-mass characteristics (vertical stiffness, P < 0.001; leg stiffness, P < 0.01). No significant interaction between sprint number and condition was found for any mechanical data. Preliminary evidence indicates that repeated-sprint ability is more impaired in hypoxia than in a hot environment, when compared to a control condition. However, as sprints are repeated, mechanical alterations appear not to be exacerbated in severe (heat, hypoxia) environmental conditions.  相似文献   

10.
Chronic ankle instability (CAI) is a condition resulting from a lateral ankle sprain. Shank-rearfoot joint-coupling variability differences have been found in CAI patients; however, joint-coupling variability (VCV) of the ankle and proximal joints has not been explored. Our purpose was to analyse VCV in adults with and without CAI during gait. Four joint-coupling pairs were analysed: knee sagittal-ankle sagittal, knee sagittal-ankle frontal, hip frontal-ankle sagittal and hip frontal-ankle frontal. Twenty-seven adults participated (CAI:n = 13, Control:n = 14). Lower extremity kinematics were collected during walking (4.83 km/h) and jogging (9.66 km/h). Vector-coding was used to assess the stride-to-stride variability of four coupling pairs. During walking, CAI patients exhibited higher VCV than healthy controls for knee sagittal-ankle frontal in latter parts of stance thru mid-swing. When jogging, CAI patients demonstrated lower VCV with specific differences occurring across various intervals of gait. The increased knee sagittal-ankle frontal VCV in CAI patients during walking may indicate an adaptation to deal with the previously identified decrease in variability in transverse plane shank and frontal plane rearfoot coupling during walking; while the decreased ankle-knee and ankle-hip VCV identified in CAI patients during jogging may represent a more rigid, less adaptable sensorimotor system ambulating at a faster speed.  相似文献   

11.
The purpose of this study was to investigate the effect of lumbosacral kinetics on sprinting. Twelve male sprinters performed 50 m sprints at maximal effort. Kinematic and ground reaction force data were recorded at approximately 40 m from sprint commencement. A whole-body inverse dynamics approach was applied to calculate joint forces and torques at the hip and lumbosacral joints. The contribution of the hips and lumbosacral joint torques to pelvic rotation was subsequently calculated, with joint force powers indicating the rate of mechanical energy transfer between segments across joint centres calculated for both hip joints. The kinetic analysis indicated that the lumbosacral torsional torque contributed significantly to pelvic rotation. Additionally, the pelvic rotation exerted anterior–posterior joint forces on the hips, contributing to the large positive joint force power at the hip of the stance leg. These hip joint force powers assisted in motion recovery during sprinting. In conclusion, the lumbosacral torsional torque might contribute to the recovery motion in sprinting through application of the anterior–posterior joint forces at the hip joints via pelvic rotation.  相似文献   

12.
ABSTRACT

Sprint cycling performance depends upon the balance between muscle and drag forces. This study assessed the influence of upper body position on muscle forces and aerodynamics during seated sprint cycling. Thirteen competitive cyclists attended two sessions. The first session was used to determine handlebar positions to achieve pre-determined hip flexion angles (70–110° in 10° increments) using dynamic bicycle fitting. In the second session, full body kinematics and pedal forces were recorded throughout 2x6-s seated sprints at the pre-determined handlebar positions, and frontal plane images were used to determine the projected frontal area. Leg work, joint work, muscle forces and frontal area were compared at three upper body positions, being optimum (maximum leg work), optimal+10° and optimal-10° of hip flexion. Larger hip (p = 0.01–0.02) and reduced knee (p = 0.02–0.03) contribution to leg work were observed at the optimal+10° position without changes at the ankle joint (p = 0.39). No differences were observed in peak muscle forces across the three body positions (p = 0.06–0.48). Frontal area was reduced at optimum+10° of hip flexion when compared to optimum (p = 0.02) and optimum-10° (p < 0.01). These findings suggest that large changes in upper body position can influence aerodynamics and alter contributions from the knee and hip joints, without influencing peak muscle forces.  相似文献   

13.
ABSTRACT

The speed performance is involved not only in linear sprints, but also in a wide spectrum of multi-directional movements, such as curve sprinting. Curved sprint can be defined as sprint with gradual and continuous change of direction (COD). Although ~85% of the actions performed at maximum velocity in a professional soccer league are curvilinear sprints, there is not any specific test to assess this ability. This study aimed to analyse the reliability of a new curve sprint test, and compare its results with those obtained by soccer players in linear sprint. Forty experienced soccer players performed 3 attempts of curve sprint (using the penalty arc) to right and left side (17 m), and 3 linear sprints (17 m) in two different days. The ICCs (inter-session reliability) were 0.93 for sprint curve right side (CSRS) and 0.89 for sprint curve left side (CSLS), considered “acceptable”. The CVs (intra-session reliability) were 0.87% in CSRS and 1.15% in CSLS. The coefficient of determination (R2) between linear and curve sprinting was ~35%. The association between curve sides was “very large” (r = 0.878; p < 0.01). In summary, we showed that “curve sprint test” is highly reliable, and that curvilinear and linear sprints are different and independent actions.  相似文献   

14.
Abstract

Lumbar spine injury is common in rowers and examination of spinal kinematics may improve the understanding of this injury's prevalence. This study aimed to examine the range of frontal plane angular displacement (AD) in the lumbar spine at L3 during ergometer rowing and to investigate the effect of exhaustion on lumbar kinematics. Twelve elite male rowers completed an incremental test on a Concept 2 ergometer. Lumbar AD at L3 was measured continually throughout the rowing trial using a Spectrotilt Inclinometer and blood lactate was sampled at 3-minute intervals. AD of between 4.7° and 8.8° was recorded at L3. There was a significant increase in AD between the first and last stage of the test (mean increase = 4.1 ± 1.94°, 95% Confidence Interval [CI], 2.9 to 5.3°, t = 7.36, P = 0.000014). Incremental rise in AD was associated with an incremental rise in blood lactate but regression confirmed that only stroke rate was a significant predictor for increasing angle. Thus there is a statistically significant increase in frontal plane AD at L3 over the course of an incremental exercise test although it cannot be confirmed if this is as a result of exhaustion. The values of AD confirm that there is motion in the frontal plane in ergometer rowing.  相似文献   

15.
In the current study, we quantified biological movement variability on the start and early acceleration phase of sprinting. Ten male athletes aged 17–23 years (100-m personal best: 10.87 ± 0.36 s) performed four 10-m sprints. Two 250-Hz cameras recorded the sagittal plane action to obtain the two-dimensional kinematics of the block start and initial strides from subsequent manually digitized APAS motion analysis. Infra-red timing lights (80 Hz) were used to measure the 10-m sprinting times. The coefficient of variation (CV%) calculation was adjusted to separate biological movement variability (BCV%) from estimates of variability induced by technological error (SEM%) for each individual sprinter and measure. Pearson's product–moment correlation and linear regression analysis were used to establish relationships between measures of BCV% and 10-m sprint start performance (best 10-m time) or 10-m sprint start performance consistency (10-m time BCV%) using SPSS version 12.0. Measurement error markedly inflated traditional measures of movement variability (CV%) by up to 72%. Variability in task outcome measures was considerably lower than that observed in joint rotation velocities. Consistent generation of high horizontal velocity out of the blocks led to more stable and faster starting strides.  相似文献   

16.
The purpose of this study was to determine the intra and inter-assessor repeatability of a modified Rizzoli Foot Model for analysing the foot kinematics of ballet dancers. Six university-level ballet dancers performed the movements; parallel stance, turnout plié, turnout stance, turnout rise and flex-point-flex. The three-dimensional (3D) position of individual reflective markers and marker triads was used to model the movement of the dancers’ tibia, entire foot, hindfoot, midfoot, forefoot and hallux. Intra and inter-assessor reliability demonstrated excellent (ICC ≥ 0.75) repeatability for the first metatarsophalangeal joint in the sagittal plane. Intra-assessor reliability demonstrated excellent (ICC ≥ 0.75) repeatability during flex-point-flex across all inter-segmental angles except for the tibia-hindfoot and hindfoot-midfoot frontal planes. Inter-assessor repeatability ranged from poor to excellent (0.5 > ICC ≥ 0.75) for the 3D segment rotations. The most repeatable measure was the tibia-foot dorsiflexion/plantar flexion articulation whereas the least repeatable measure was the hindfoot-midfoot adduction/abduction articulation. The variation found in the inter-assessor results is likely due to inconsistencies in marker placement. This 3D dance specific multi-segment foot model provides insight into which kinematic measures can be reliably used to ascertain in vivo technical errors and/or biomechanical abnormalities in a dancer’s foot motion.  相似文献   

17.
The treadmill is an attractive device for the investigation of human locomotion, yet the extent to which lower limb kinematics differ from overground running remains a controversial topic. This study aimed to provide an extensive three-dimensional kinematic comparison of the lower extremities during overground and treadmill running. Twelve participants ran at 4.0 m/s ( ± 5%) in both treadmill and overground conditions. Angular kinematic parameters of the lower extremities during the stance phase were collected at 250 Hz using an eight-camera motion analysis system. Hip, knee, and ankle joint kinematics were quantified in the sagittal, coronal, and transverse planes, and contrasted using paired t-tests. Of the analysed parameters hip flexion at footstrike and ankle excursion to peak angle were found to be significantly reduced during treadmill running by 12° (p = 0.001) and 6.6° (p = 0.010), respectively. Treadmill running was found to be associated with significantly greater peak ankle eversion (by 6.3°, p = 0.006). It was concluded that the mechanics of treadmill running cannot be generalized to overground running.  相似文献   

18.
Abstract

The aim of this study was to test the hypothesis that sprint performance (time over a given distance) would be affected by track compliance, with better performances on the more compliant surface. Ten sprinters participated in the study. The athletes performed maximal sprints (60 m) on three different track configurations (hard, 5500 kN · m?1; soft, 2200 kN · m?1; spring, 550 kN · m?1). A 60-m single-lane running surface was constructed. Plywood boards (1.2 cm thick) were placed on a 60 × 0.6 m wooden chipboard frame serving as the base surface. All participants ran two times on each track configuration in a randomized order. The athletes' kinematics were recorded using the Vicon 624 system with 12 cameras operating at 250 Hz. Four Kistler force plates (1250 Hz) were used to record ground reaction forces. Sprint performance (time over 60 m) was unaffected by the different track compliances (P = 0.57). In addition, there was no effect of track (P > 0.05) on the sprinting kinematics and kinetics of the ankle or knee joint. The hypothesis that sprint performance is affected by track compliance can be rejected because the sprinters recorded similar performances while sprinting over 60 m on all three track configurations. We conclude that: (1) the possible deformation of the track while sprinting is minor enough not to cause a specific adjustment in the leg mechanics affecting the effectiveness of the stretch – shortening cycle of the sprinters; and (2) the energy exchange between sprinters and tracks has only a marginal effect on sprint performance due to its small magnitude. More research on tracks with lower stiffness is required.  相似文献   

19.
This study aimed to investigate the effects of forward trunk lean on hamstring muscle kinematics during sprinting. Eight male sprinters performed maximal-effort sprints in two trunk positions: forward lean and upright. A three-dimensional musculoskeletal model was used to compute the musculotendon lengths and velocity of the biceps femoris long head, semitendinosus, and semimembranosus muscles during the sprinting gait cycle. The musculotendon lengths of all the three hamstring muscles at foot strike and toe-off were significantly greater during the forward trunk lean sprint than during the upright trunk sprint. In addition, a positive peak musculotendon lengthening velocity was observed in the biceps femoris long head and semimembranosus muscles during the late stance phase, and musculotendon lengths at that instant were significantly greater during the forward trunk lean sprint than during the upright trunk sprint. The present study provides significant evidence that a potential for hamstring muscle strain injury involving forward trunk lean sprinting would exist during the stance phase. The results also indicate that the biceps femoris long head and semimembranosus muscles are stretched during forward trunk lean sprinting while contracting eccentrically in the late stance phase; thus, the elongation load on these muscles could be increased.  相似文献   

20.
Abstract

The present study aimed to analyse the influence of speed and power abilities in goal situations in professional football.

During the second half of the season 2007/08, videos of 360 goals in the first German national league were analysed by visual inspection. For the assisting and the scoring player the situations immediately preceding the goal were evaluated. The observed actions were categorised as: no powerful action, rotation (around the body's centre-line), straight sprint, change-in-direction sprint, jump, or a combination of those categories.

Two hundred and ninety-eight (83%) goals were preceded by at least one powerful action of the scoring or the assisting player. Most actions for the scoring player were straight sprints (n = 161, 45% of all analysed goals, P < 0.001) followed by jumps (n = 57, 16%), rotations and change-in-direction sprints (n = 22, 6% each). Most sprints were conducted without an opponent (n = 109, P < 0.001) and without the ball (n = 121, P < 0.001). Similarly, for the assisting player the most frequent action was a straight sprint (n = 137, P < 0.001) followed by rotations (n = 28), jumps (n = 22) and change-in-direction sprints (n = 18). The straight sprints were mostly conducted with the ball (n = 93, P = 0.003).

In conclusion, straight sprinting is the most frequent action in goal situations. Power and speed abilities are important within decisive situations in professional football and, thus, should be included in fitness testing and training.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号