首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 62 毫秒
1.
对四分之一波片补偿腔内退热偏损耗进行了实验研究.在泵浦电流为20 A条件下,带有四分之一波片补偿作用的侧泵Nd:YAG激光谐振腔输出2.67 W 1 064 nm激光输出,其腔内光束退偏率远小于没有腔内补偿的退片率.研究结果证明腔内四分之一波片补偿作用对于降低腔内光束退偏损耗、提升激光功率具有较好的效果.  相似文献   

2.
The noncollinear optical parametric amplification in BBO crystal is theoretically investigated. The phase matching angle, gain bandwidth, optimal noncollinear angle and conversion efficiency for both type-Ⅰ and type-Ⅱ BBO are simulated. The numerical simulation results are important to the practical optical parametric amplification experiments with BBO crystal.  相似文献   

3.
对特殊电容器一极板不平行的电容器进行了研究,主要采用数学物理方法中的复变函数及保角变换理论,结合电磁学和电动力学中的一些基本理论,对其进行了分析和研究,推导出了该类电容器特性参数一电场分布函数以及电容的计算公式,以及电场分布函数和电容值在具体条件下的计算方法.  相似文献   

4.
We studied the problem of bifurcation and chaos in a 4-side fixed rectangular thin plate in electromagnetic and mechanical fields. Based on the basic nonlinear electro-magneto-elastic motion equations for a rectangular thin plate and the expressions of electromagnetic forces, the vibration equations are derived for the mechanical loading in a steady transverse magnetic field. Using the Melnikov function method, the criteria are obtained for chaos motion to exist as demonstrated by the Smale horseshoe mapping. The vibration equations are solved numerically by a fourth-order Runge-Kutta method. Its bifurcation diagram, Lyapunov exponent diagram, displacement wave diagram, phase diagram and Poincare section diagram are obtained.  相似文献   

5.
分析了测量布儒斯特角时出现折射波功率大于入射波功率的异常现象原因:在喇叭口面上折射波场的相位偏差小于入射波场的相位偏差,喇叭接收折射波的增益大于接收入射波增益。提出了改进方法。  相似文献   

6.
通过分析圆偏振外差光束分别经透明板反射和透射后的s光和p光的相位差改变,得到了它们与透明板折射率和厚度的关系.利用改进的M-Z干涉仪设计和构建了能同时测定透明板的折射率和厚度的实验装置,通过测量从透明板反射的圆偏振外差光束的s光和p光的相位差,将测量数据代入理论上导出的特定方程,可以计算出被测透明板的折射率.同时,透明板又在改进的M-Z干涉仪的测量臂中,由波长偏移和光通过透明板引起s光和p光的相位差改变.由透明板折射率的测量值、相位差改变和波长偏移的特定值可得到透明板的厚度.从而实现在同一光学构造下完成对透明板的折射率和厚度的同时测量.  相似文献   

7.
研究目的:通过实验方法定量研究在相变材料较为剧烈的熔化传热过程中散热器倾斜角度的改变对其瞬时性能所产生的影响。创新要点:定量研究在倾斜角度从水平到垂直时,储能式散热器在脉冲式热负荷作用下瞬时性能的变化规律,并在所研究的工况范围内给出了最优的倾斜角度参考值。研究方法:采用电加热方法模拟电子器件所产生的热源,通过调节电压改变脉冲式热负荷的强度和作用时间,并根据热电偶测量所得的加热表面温度变化来表征储能式散热器的瞬时性能。重要结论:在一定的倾斜角度下工作,可以有效提升基于相变材料的储能式散热器的瞬时性能。在加热功率为40 W、以75℃为目标时,其有效保护时间的相对增长可达约67%。  相似文献   

8.
1 Introduction Recently,aseriesofexperimentsbyYacobyetal.[1]andBuksetal.[2]reportedsomemeasurementsofelectrontransmissionphaseinresonanttunnelingthroughaquantumdot(QD)whichisinsertedintoonearmofanAharonovBohm(AB)ring.TheconductancethroughtheABringw…  相似文献   

9.
对薄圆盘的弯曲振动和辐射声场的特性进行了研究,推导出了三种边界条件下圆盘辐射声场指向性的数值表达式,编制程序并研究其声辐射特性。结果表明,相同尺寸不同边界条件下圆盘指向性的尖锐程度不同,固定边界条件下圆盘辐射声场指向性最佳,自由边界条件下较差,并且随着圆盘模式和几何尺寸的增加各边界条件下圆盘的指向性均逐渐变差。  相似文献   

10.
1 Introduction Theproblemofhowlongittakesparticlestotunnelthroughapotentialbarrierremainscontroversial,andavarietyofdefinitionshavebeenproposedforthetunnel ingtimeconcept[1~ 3 ].Animportantoneamongthoseisthephasetime (alsoknownasthegroupdelayintheli teratu…  相似文献   

11.
该文围绕高性能X射线康普顿散射成像需求,开展了大视场、高分辨率Schmidt物镜的研发及成像实验研究。基于光学设计,研制了分离式的Schmidt物镜,解决了物镜在子午方向和弧矢方向存在分辨率差异的问题,提高了物镜的成像分辨率。开展了X射线康普顿散射成像实验研究,检验了物镜的灵敏度和分辨率。实验结果表明,Schmidt物镜在120 mm视场内的分辨率约为3 mm,对置于1 mm钢板后的PMMA探测灵敏度约为10 g,实现了高分辨率、高灵敏度的探测。  相似文献   

12.
Plate packages are effective and promising appa-ratus for the separation of droplets from non-homoge-neous mixed systems of liquid-liquid dispersion inchemical unit operation for their features of compactconfiguration, low equipment cost and high efficien-cy[1]. The theories of plate separators were proposedand a lot of experimental researches were carried outin 1960s. Walteret alproved that in contrast to tradi-tional gravity settlers, plate packages are successfullyused to improve the separa…  相似文献   

13.
车牌识别技术作为智能交通的重要组成部分,在人们的生活中发挥着越来越重要的作用。车牌定位、字符分割、字符识别是车牌识别的三个重要组成部分,是车牌识别技术研究的重点,从这三个方面对车牌识别技术的发展和现状及车牌识别技术的应用进行了简要介绍。  相似文献   

14.
基于0.13μm CMOS技术设计了一个应用于无线传感网频率合成器、电源电压为0.5 V的鉴频鉴相器.它的功能是比较输入信号的频率和相位差,并输出一个与该差值成比例的电压.因电源电压是0.5 V,所以该电路采用低阈值晶体管.为了增大相位误差的检测范围和提高最大工作频率,该电路采用了脉冲锁存的结构.当输入信号频率为2 M...  相似文献   

15.
1 Introduction The three-di mensional optical data storage is ofmuch interest in recent years[1-8].It has a great poten-tial for recording density.Currently,thetwo mainfac-tors affecting the density are the wavelength andspherical aberration caused by bot…  相似文献   

16.
钢板在精轧时开裂,采用金相显微镜和电子探针对开裂钢板进行了观察和分析。结果表明开裂钢板的板厚中心区域存在Mn等元素偏析并观察到较多聚集分布的夹杂物和严重的马氏体偏析条带;分析认为Mn等元素偏析导致马氏体和聚集分布的夹杂物的产生,而马氏体相变属于非扩散型相变,相变时发生较大的体积膨胀,产生较大的内应力,同时夹杂物的存在为裂纹的产生提供裂纹源,二者共同作用导致裂纹产生并扩展至开裂。  相似文献   

17.
李晶 《唐山学院学报》2016,29(6):1-5,40
给出了横向磁场作用下矩形薄板的磁弹性振动方程,针对一边固定、三边简支的矩形薄板,通过位移模态展开,并利用Galerkin法得到两自由度内共振非线性振动微分方程组。算例分析中,利用数值方法得到了系统内共振时两阶模态的时间历程响应图和相平面图,并分别讨论了系统初值及磁场强度对系统振动的影响。结果表明,系统呈现明显的非线性内共振特征。  相似文献   

18.
INTRODUCTIONAsweknow ,thecomputationalpiezoelectricdynamicequationsforhighfrequencyacousticwavepropagationswereoriginallyexpandedfromthegeneralcomputationalstructuralmechanics,andthefiniteelementmethods(FEM)initiallyfromaerospaceandcivilengineering .The…  相似文献   

19.
该文介绍了两种光学薄膜反射系数的计算方法——等效界面法和导纳矩阵法,并比较了两种方法在多层光学薄膜结构下的反射率和相位差计算结果.发现当计算数值有效位数为15时,两种方法的反射率和相位差结果差异分别为10-15量级和10-14rad量级,远小于反射率和相位差的测量分辨率,可以认为两者的结果相同.这说明两个基于相同理论基础的方法,计算结果也是相同的,并通过实验证实了计算结果的可靠性.  相似文献   

20.
This paper discusses the validity of (adaptive) Lagrange generalized plain finite element method (FEM) and plate element method for accurate analysis of acoustic waves in multi-layered piezoelectric structures with tiny interfaces between metal electrodes and surface mounted piezoelectric substrates. We have come to conclusion that the quantitative relationships between the acoustic and electric fields in a piezoelectric structure can be accurately determined through the proposed finite element methods. The higher-order Lagrange FEM proposed for dynamic piezoelectric computation is proved to be very accurate (prescribed relative error 0.02%–0.04%) and a great improvement in convergence accuracy over the higher order Mindlin plate element method for piezoelectric structural analysis due to the assumptions and corrections in the plate theories. The converged Lagrange finite element methods are compared with the plate element methods and the computed results are in good agreement with available exact and experimental data. The adaptive Lagrange finite element methods and a new FEA computer program developed for macro- and micro-scale analyses are reviewed, and recently extended with great potential to high-precision nano-scale analysis in this paper and the similarities between piezoelectric and seismic wave propagations in layered structures and plates are stressed. Project supported by SRF for ROCS, SEM of China and partially by Zhejiang Provincial Natural Science Foundation (NSF) of China.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号