排序方式: 共有70条查询结果,搜索用时 15 毫秒
1.
铋层状结构无铅压电陶瓷具有优良的铁电性能,适合应用于高温、高频领域以及疲劳特性好的铁电存储器领域.本文介绍了铋层状压电材料的结构特点,综述了铋层压电材料的改性研究;着重综述了铋层状结构压电陶瓷材料的掺杂改性研究进展,并对存在的问题和解决方法进行了分析,为制备出高性能的铋层状结构无铅压电陶瓷材料提供一定的参考价值,经过改性的材料可能应用在铁电显示器中. 相似文献
2.
将压电陶瓷片固定在迈克尔逊干涉仪的移动镜上,当加在压电陶瓷片上的驱动直流电压增加时,引起压电陶瓷的微小伸长进而引起移动镜的移动,引起光屏上干涉条纹环数目的变化;用线阵CCD(charge coupled device)作为光电传感器件捕捉干涉条纹的光强信号,再将电信号进行模数转换,采取USB接口与微机接口,用C++语言编写程序设计了一种新型的条纹自动计数软件,将这种计数方法与压电系数的测量结合起来,可以自动得出其压电系数. 相似文献
3.
为了研究不同频率的激振力叠加作用下平板叶片的位移响应变化,在平板叶片上选取激励点和多个响应点进行相关性激励试验。试验中,首先运用设计的加法器对频率为112、280和583 Hz的简谐力分别进行叠加,然后以压电陶瓷片作为激振器对平板叶片进行激励,同时以压电陶瓷片作为感应器采集位移响应,最后应用谱分析方法对位移响应进行分析。通过对比不同频率的激振力叠加作用下的位移响应自功率谱幅值,发现自功率谱幅值比单一频率激振力作用时有所降低,并且降低的程度和与其叠加的激振力频率的大小和个数有关,叠加的个数越多,降低的程度越大。 相似文献
4.
A profilometer used for 3 dimension measurement of micro-surface topography is presented. The instrument is based on the vertical scanning microscopic interferometry (VSMI). A Linnik type interference microscope is used and the interferograms which present changes of surface profile are recorded with a CCD camera. A developed nano-positioning work stage with an integrated optical grating displacement measuring system realizes the precise vertical scanning motion during profile measurement. By a white-light phase shifting algorithm of arbitrary step, frames of interferograms are processed by a computer to rebuild and evaluate the measured profile. Because of the specialty of VSMI, the profilometer is suitable for both smooth and rough surface measurement. It can also be used to measure curved surfaces, dimension of micro electro mechanical systems (MEMS), etc. The vertical resolution of the profilometer is 0.5 nm, and lateral resolution 0.5 μm. 相似文献
5.
基于滑模控制的悬臂梁振动控制实验研究 总被引:1,自引:0,他引:1
文章首先介绍了滑模面和控制函数的选取,然后用Matlab/Simulink建立基于滑模控制的仿真模型,通过实时仿真系统dSPACE实现仿真模型与实验硬件装置的连接。采用压电陶瓷传感器采集悬臂梁振动位移,控制器输出经压电陶瓷驱动器对悬臂梁进行振动控制,控制目标是获得短的调节时间,并减小滑模控制常有的抖振.实验结果表明,设计的滑模控制器对悬臂梁的振动具有很好的抑制作用. 相似文献
6.
介绍了智能阀门定位器及常规电气阀门定位器的工作原理。从使用、维护和经济三个方面对比分析了智能定位器和传统定位器的优缺点,发现智能阀门定位器具有性能稳定、调校方便、维修简单、成本低廉等优点。阐述了当前化工企业中广泛使用智能阀门定位器面临的挑战。 相似文献
7.
8.
A three-dimensional, exact analysis is presented in this paper for the problem of an external circular crack in a transversely
isotropic piezoelectric medium subjected to arbitrary antisymmetric shear loading. A recently proposed general solution of
three-dimensional piezoelectricity is employed. It is shown that four quasi harmonic functions involved in the general solution
can be respresented by just one complex potential. Previous results in potential theory are then used to obtain the exact
solution of the problem. For point shear loading, Green’s functions for the elastoelectric field are derived in terms of elementary
functions.
Project supported by Scientific Research Foundation for Returned Overseas Chinese Scholars, State Education Ministry and partly
by National Natural Science Foundation of China (NSFC) (10002016). 相似文献
9.
10.
采用弹性铰链作为预紧机构,采用压电陶瓷作动器作为驱动机构,设计了一种超精密磨削辅助工件平台。具有结构简单、位移分辨率高、动态响应速度快等优点。文中通过试验研究了其在开环和闭环控制下的静态和动态特性,结果表明,其中心部位静态刚度达到200N/μm,Z向的固有频率达到1289Hz。 相似文献