首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
High resistance thin film chip resistors(0603 type) were studied,and the specifications are as follows:1 k? with tolerance about ±0.1% after laser trimming and temperature coefficient of resistance(TCR) less than ±15×10-6/℃.Cr-Si-Ta-Al films were prepared with Ar flow rate and sputtering power fixed at 20 standard-state cubic centimeter per minute(sccm) and 100 W,respectively.The experiment shows that the electrical properties of Cr-SiTa-Al deposition films can meet the specification requirements of 0603 type thin film chip resistors when the deposition time was about 11 min and deposition films were annealed at 500 ℃ for 120 min.The morphologies of Cr-Si-TaAl film surfaces were examined by scanning electron microscopy(SEM).The analysis suggests that Ta and Al may be distributed in CrSi2 film with mixed form of several structures(e.g.,bridge-like,capillary-like or island-like structures),and such a structure distribution is responsible for high film resistance and low TCR of Cr-Si-Ta-Al film.  相似文献   

2.
Phenolic resin(PF) and nano-SiO2 were used to improve the curing property and high humidity resistance of epoxy resin (EP) and methyl nadic anhydride (MNA) resistor paint, respectively. Hydrogen bonds, formed between phenolic resin and nano-SiO2 in alcohol, made nano-SiO2 disperse easily in EP/MNA paint through phenolic resin without being treated by supersonic vibration. When the mass ratio of PF to EP in paint is 3:7, the formed composite paint film can be cured in 2 min at 170 °C. When the mass ratio of nano-SiO2 to PF in paint is 3:100, the property of high humidity resistance of the composite paint is the best, meeting the requirement of varying ratio of resistance less than 0.1% after experiment on high humidity resistance. SEM analysis shows the surface of the composite paint film is smooth, glassy, tight and homogeneous, without acicular air holes.  相似文献   

3.
INTRODUCTION Steel rebar embedded in concrete is protectedagainst corrosion by the thin passive film on its sur-face and the physical protection from concrete. Thealkaline environment (pH≥12.5) of the concrete poresolution triggers passivation on the rebar surface andformation of the protective oxide film. The physicaprotection of concrete coverage hinders the invasionof aggressive agents. However, this passivity can bebroken down by local pH loss as a result of concretecracking or the…  相似文献   

4.
ZnNiO thin films with different contents of Ni (0–10 at.%) were fabricated on quartz and Si (100) substrates by pulsed laser deposition (PLD). We measured the samples by X-ray diffraction (XRD), field-emission scanning electron microscope (FE-SEM), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectrometer (UV-VIS), and Hall testing. When the Ni contents were below 3 at.%, partial Zn2+ ions were replaced by the Ni2+ ions without forming any other phases, which enhanced the conductivity of the film. When the Ni contents were above 3 at.%, Ni ions were at the interstitial sites, and Ni-related clusters and defects were able to emerge in the films, resulting in a worsening of electrical and optical properties. A ferromagnetic hysteresis with a coercive force of approximately 30 Oe was observed in the ZnNiO film with a Ni content of 3 at.% at room temperature.  相似文献   

5.
离子注入聚合物(在一定的能量和一定的剂量)，可引起聚合物电导率增加几个到十几个数量级。利用这个特性，可制作导电图样，制作连线，制作P型半导体材料和N型半导体材料，制作P-N结，制作二维和三维集成电路互连接。离子注入聚合物还使聚合物的颜色加深，光吸收增加，可制作有机太阳能电池。  相似文献   

6.
为满足客户的要求,获得表面均一、耐蚀性能好的包装用涂漆捆带,对影响涂漆捆带的诸多因素进行了全面分析。包括冷轧基板表面状态、热处理过程、杂质离子、原漆质量、漆膜厚度、涂漆工艺、涂漆后处理及其他对漆膜的机械性损伤等。并针对这些因素提出了相应的改进措施。  相似文献   

7.
Understanding the ecology of the gastrointestinal tract and the impact of the contents on the host mucosa is emerging as an important area for defining both wellness and susceptibility to disease. Targeted delivery of drugs to treat specific small intestinal disorders such as small bowel bacterial overgrowth and targeting molecules to interrogate or to deliver vaccines to the remote regions of the small intestine has proven difficult. There is an unmet need for methodologies to release probes/drugs to remote regions of the gastrointestinal tract in furthering our understanding of gut health and pathogenesis. In order to address this concern, we need to know how the regional delivery of a surrogate labeled test compound is handled and in turn, if delivered locally as a liquid or powder, the dynamics of its subsequent handling and metabolism. In the studies we report on in this paper, we chose 13C sodium acetate (13C-acetate), which is a stable isotope probe that once absorbed in the small intestine can be readily measured non-invasively by collection and analysis of 13CO2 in the breath. This would provide information of gastric emptying rates and an indication of the site of release and absorptive capacity. In a series of in vitro and in vivo pig experiments, we assessed the enteric-protective properties of a commercially available polymer EUDRAGIT®L100-55 on gelatin capsules and also on DRcaps®. Test results demonstrated that DRcaps®coated with EUDRAGIT®L100-55 possessed enhanced enteric-protective properties, particularly in vivo. These studies add to the body of knowledge regarding gastric emptying in pigs and also begin the process of gathering specifications for the design of a simple and cost-effective enteric-coated capsule for delivery of acid-labile macromolecules to the small intestine.  相似文献   

8.
In order to clarify the equilibrium components in the hydrolysis solution of boron trifluoride(BF_3-H_2O),the BF_3-H_2O was prepared by mixing BF_3-CH_3OH with large amount of water,in which the stoichiometric concentration of BF_3 is less than 0.1 mol/L.Two ionic equilibrium models were proposed to simulate the hydrolysis equilibrium of BF_3 and tested by special acid-base titration technique.The most accurate ion equilibrium constants were determined.The model,which was assumed to have no HF,was proved to be more representative for the real system and used to simulate the hydrolysis equilibrium of BF_3.The simulation suggested that H~+,BF_4~-,BF_3OH~- and H_3BO_3 were the main species in the dilute hydrolysis solution,while BF_2(OH)_2~- and F~- were insignificant species whose concentrations were both in the order of 10~(-4) mol/L magnitude,and BF(OH)_3~- could be omitted because its concentration almost equaled zero.Meanwhile,the equilibrium constant of the overall ionic reaction at 25℃ was obtained as 161.6.  相似文献   

9.

As a practicum supervisor in the teacher education program at UW-Madison, I designed many projects and activities around "school films". I define a "school film" as a film that in some way, even incidentally, is about an educator or a student. Some well-known school films are Dead Poets Society , Stand and Deliver , and To Sir, With Love . Some lesser-known ones are Waterland, Welcome to the Doll House, Small Change, and Maedchen in Uniform . In this article, I discuss a project that involved taking up the film Teachers (1984) for the purpose of problematizing practicum students' traditional, "autonomous" views of literacy. The project's goal was to introduce students to a "Discourses" orientation toward literacy through a combination of "reading" both print and film texts, writing reactions to these texts, and discussing these reactions and the texts during seminars.  相似文献   

10.
Pseudomonas aeruginosa strain （AS 1.50） and Bacillus subtilis strain （AS 1.439） from Ming lake were decomposed by photocatalytic nanostructure N-TiO2 thin films in a photo-reactor under UV irradiation. The different thickness nanostructure N-TiO2 thin films coated on mesh grid were prepared by sol-gel method and immobilized at 500 ℃ （films A） or 350 ℃ （films B） for 1 h in a muffle furnace. The results showed that N-TiO2 thin film B （8.18 nm thickness, 2.760 nm height and 25.15 nm diameter） has more uniform granular nanostructure and thinner flat texture than N-TiO2 thin film A （12.17 nm thickness, 3.578 nm height and 27.50 nm diameter）. The bactericidal action of N-TiO2 thin film A and film B for Pseudomonas aeruginosa strain （AS 1.50） and Bacillus subtilis varniger strain （AS1.439） were investigated in this work. More than 95% of photocatalytic bactericidal efficiency for Pseudomonas aeruginosa strain （AS 1.50） and 75% for Bacillus subtilis strain （AS 1.439） were achieved by using N-TiO2 thin films-B for 70-80 rain of irradiation during the photo-bactericidal experimental process. The results indicated that the photo-induced bactericidal efficiency of N-TiO2 thin films probably depended on the characteristics of the films.  相似文献   

11.
Applying theories of cognition and affect that predict emotional responses to a stimulus on the basis of prior affect toward specific cues included in that stimulus, a study was conducted assessing individuals' fear and enjoyment reactions to horror films. Prior fear of specific cues included in each film was a significant predictor of overall fear reactions, after controlling for prior exposure to the film, fear of specific cues not included in the film, and manifest anxiety. Prior liking of specific cues included in each film did not emerge as a significant predictor of overall enjoyment. The contributions of gender and of level of forewarning about the film's content were also assessed.  相似文献   

12.
Amorphous InGaZnO (a-IGZO) films were deposited on the corning eagle XG (EXG) glass substrates using magnetron sputtering method. The structure, surface morphology, electrical and optical properties of these films were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), semiconductor parameter analyzer and spectrophotometry, respectively. The influence of oxygen flow on the electrical properties of IGZO thin films was studied, showing that increasing oxygen flow changes the resistivity with six orders of magnitude. The contact resistance of ITO/IGZO is 7.35×10−2 Ω·cm2, which suggests that a good ohmic contact exists between In2O3: Sn (ITO) and IGZO film.  相似文献   

13.
In this paper, a novel surface-enhanced Raman scattering (SERS) sensor combined with fused biconical taper fiber (FBTF) and film coated with silver sols is proposed. This structure is designed to significantly increase the SERS active surface when the length of the taper is increased and the radius is reduced, since the penetration depth is inversely proportional to the taper radius and proportional to the taper length according to the fiber-optic evanescent-wave theory. Based on the SERS sensing principle, the feasibility of FBTF sensor is analyzed in this paper. As a result, the Raman spectrum of R6G is obtained from the fused biconical taper zone surface coating with the silver sols in our experiments. The detected concentration is up to 10−7mol/L.  相似文献   

14.
The micro-Raman method is a non-contact and non-destructive method for thermal conductivity measurement. To reduce the measurement error induced by the poor fit of the basic equation of the original micro-Raman method, we developed a new basic equation for the heat source ofa Gaussian laser beam. Based on the new basic equation, an analytical heat transfer model has been built to extend the original micro-Raman method to thin films with submicrometer- or nanometer-scale thickness. Experiments were performed to measure the thermal conductivity of dielectric thin films with submicrometer- or nanometer-scale thickness. The thermal resistance of the interface between dielectric thin films and their silicon substrate was also obtained. The obtained thermal conductivity of silicon dioxide film is 1.23 W/（m.K）, and the interface thermal resistance between silicon dioxide film and substrate is 2.35×10^-8 m^2.K/W. The thermal conductivity and interface thermal resistance of silicon nitride film are 1.07 W/（m.K） and 3.69×10^-8 m^2.K/W, respectively. The experimental results are consistent with reported data.  相似文献   

15.
MBE growth of ZnSxSe1-x thin films on ITO coated glass substrates were carried out using ZnS and Se sources with the substrate temperature ranging from 270℃ to 330℃. The XRD θ/2θ spectra resulted from these films indicated that the as-grown polycrystalline ZnSxSe1-x thin films had a preferred orientation along the (111) planes. The evaluated crystal sizes as deduced from the FWHM of the XRD layer peaks showed strong growth temperature dependence, with the optimized temperature being about 290℃. Both AFM and TEM measurements of these thin films also indicated a similar growth temperature dependence. High quality ZnSxSe1-x thin film grown at the optimized temperature had the smoothest surface with lowest RMS value of 1.2 nm and TEM cross-sectional micrograph showing a well defined columnar structure.  相似文献   

16.
A practical film course for educational technology students is described. The course is designed as an intensive two-day 'immersion' in film techniques and ideas. It begins with the making of simple 16mm animated cartoon films using transparent film and coloured spirit pens. Synchronized sound is incorporated in a second cartoon. After exercises designed to teach the recognition of 'shots', the editing and assembly of previously-shot Super 8mm film material is set as an individual exercise. A short Super 8 film is then planned by each student and also (working in pairs) a further short advertising-type film. After basic camera instruction these films are shot, the films being edited at a later date. Student reactions to the course are indicated and simple costing is also included.  相似文献   

17.
为了提高镁合金耐腐蚀性能,采用正交试验对镁合金环保型阳极氧化电解液进行优化,确定了最佳的电解液组成,并通过全浸试验和动电位极化曲线等检测手段研究膜层的耐腐蚀性能.结果表明:镁合金经组成为50g/L氢氧化钠、100 g/L硼酸钠、20 g/L硅酸钠的电解液氧化后,表面生成的氧化膜光滑、平整、致密性好,腐蚀电位提高75 mV左右,耐腐蚀性能提高45%左右,对镁合金基体有良好的防护性.  相似文献   

18.
The copolymerization of CO and styrene catalyzed by Pd/C toward the formation of polyketones(PK)was studied in the N-valeronitrile-N'-methylimidazolium hexafluorophosphate([C4CNmim]+PF-6) medium. The synthesized PK was characterized by Fourier transform infrared(FTIR), elemental analysis, 13C-nuclear magnetic resonance(13C-NMR), differential scanning calorimetry(DSC), thermogravimetric analysis(TGA) and gel permeation chromatography(GPC). The supported ionic liquid film on the surface of Pd/C catalyst can prevent the products from covering the hole of active carbon due to its chemical stability and weak coordination ability with metal ions, and thus efficiently improve the catalytic activity. The effects of different amounts of ionic liquid on the catalytic activity and reusability of the catalyst and the molecular weight of PK were discussed. When the usage of ionic liquid is 10wt%(0.1 g ionic liquid / 1 g active carbon carrier) and the theoretical content of Pd2+ is 5wt%(0.05 g Pd2+/ 1 g active carbon carrier), the highest catalytic activity 2 963.64 gSTCO/(gPd·h) is achieved with the molecular weight and polydispersity index of PK as Mn=9 684, Mw=13 452 and Mw /Mn=1.389.  相似文献   

19.
开发了一套可在控温、控湿环境中开展不同形态薄层液膜下CO2腐蚀测试的实验装置,以适应薄层液膜下的CO2腐蚀机制及规律研究需求.实验装置主要由环境控制系统、液膜厚度测量系统和腐蚀电化学测试系统组成.环境控制系统主体为有机玻璃做成的密闭环境腔,既可以开展控温、控湿以及承压环境下的实验测试,同时又可方便地观察腔体内情况.薄层...  相似文献   

20.
C60是碳的一种同素异形体,具有很多奇特的物理化学性质,[1]Langmuir-Blodgett膜（LB膜）是形成C60分子有序结构的一种有效的方法。[2]通过研究沉积在亲水玻璃基底上的单层C60/SA LB复合膜和单层C60/AA LB复合膜的π-A曲线和原子力显微镜（AFM）图片,发现C60/SA LB复合膜排列更为均匀有序,而C60/AA LB复合膜排布不如C60/SA LB复合膜均匀有序,但是膜的厚度较薄。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号