共查询到20条相似文献，搜索用时 0 毫秒
1.
A 2D and 3D kinematically admissible rotational failure mechanism is presented for homogeneous slurry trenches in frictional/cohesive soils.Analytical approaches are derived to obtain the upper bounds on slurry trench stability in the strict framework of limit analysis.It is shown that the factor of safety from a 3D analysis will be greater than that from a 2D analysis.Compared with the limit equilibrium method,the limit analysis method yields an unconservative estimate on the safety factors.A set of examples are presented in a wide range of parameters for 2D and 3D homogeneous slurry trenches.The factor of safety increases with increasing slurry and soil bulk density ratio,cohesion,friction angle,and with decreasing slurry level depth and trench depth ratio,trench width and depth ratio.It is convenient to assess the safety for the homogeneous slurry trenches in practical applications. 相似文献
2.
Resonant frequencies of a piezoelectric drum transducer 总被引：1，自引：0，他引：1
This paper presents a piezoelectric-metal structure called a drum transducer. An equation for calculating the resonance frequency of the drum transducer is obtained based on thin plate elastic theory of piezoelectric and metal material combined with the Rayleigh-Ritz method. The finite element method （FEM） was used to predict the excitation frequency of the drum transducer. To verify the theoretical analysis, the input impedance characteristic of the drum transducer was measured using an experimental method. The results obtained from theoretical analysis were in very good agreement with those from the FEM and experimental results. The effect of geometrical changes to the thick-walled steel ring of the drum transducer at the first resonance frequency is also described. The calculated results were found to be in good agreement with the FEM results. The results indicate that the first resonance frequency of the drum decreases with the increasing inner diameter of the thick-walled steel ring. 相似文献
3.
This study proposes a model of syngas production from municipal solid waste （MSW） gasification with air in fixed bed reactors. The model （using Aspen plus simulator） is used to predict the results of MSW gasification and to provide some process fundamentals concerning syngas production from MSW gasification. The effects of gasification temperature, air equiva- lence ratio and moisture concentration on the composition of syngas, lower heating value （LHV） of syngas, heat conversion efficiency, and carbon conversion are discussed. The results indicate that higher temperature improves gasification, and higher air equivalence ratio increases the carbon conversion while decreasing syngas LHV. Heat conversion efficiency increases and reaches the maximum and then decreases with the increase of air equivalence ratio. Higher moisture concentration increases the carbon conversion and increases the heat conversion efficiency at lower ratios. Higher temperature and a lower equivalence ratio are favorable for obtaining a higher LHV of syngas at the same moisture concentration. 相似文献
4.
The western Iratsu mass, the largest tectonic body in the Sambagawa metamorphic belt, central Shikoku, is mainly composed of epidote amphibolite with minor amounts of eclogite. Systematically, a majority of garnets show bell-shaped chemical zoning of pyrope contents and Mg/(Mg Fe2 ) monotonously increasing outward. The grossular component in zonal garnet increases outwards, maximizes at an intermediate part, and then decreases towards the outermost rim, reflecting a process from increasing to decreasing pressure conditions during the prograde metamorphism. Jadeite contents of omphacite range from 25～20mole% within the cores to 15～10 mole% at the rims, implying a pressure-decreasing process (from 11 × 105 Pa to 8 × 105 Pa). The peak pressure-temperature (P-T) condition of 630～680 ℃ and ca. 15× 105 Pa in the western Iratsu mass is much higher than that of (610±25) ℃ and (10± 1)× 105 Pa of the Sambagawa oligoclase-biotite zone schists. The authors suggest a clockwise P-T-t path for the western Iratsu mass. 相似文献
5.
Lattice Boltzmann method was used to numerically investigate the motion and orientation distribution of cylindrical and cubic particles in pipe flow with high concentration and high particle to pipe size ratio. The transient impulse model of 3D collisions between particles and between particle and wall is proposed. The numerical results are qualitatively in agreement with and quantitatively comparable to the experiment data. The results show that the increases of both the cylindrical particle to pipe size ratio and the particle aspect ratio decrease the rotation about all axes. All rotations of cubic particles decrease with increasing the particle concentration. The cubic particles, rotating more drastically in the flow with large Reynolds number, rotate faster than the cylindrical particles with the same size. The cylindrical particles align with the flow direction more obviously with decreasing Reynolds numbers. However, the orientations of cubic particles are spread all over the range with no significant difference in magnitude, and the Reynolds numbers have no obvious effect on the orientations of cubic particles. 相似文献
6.
LI Wen-zhuo CHE Yu-liang LIU Zi-yang ZHANG Dan 《浙江大学学报(A卷英文版)》2007,8(2):331-334
The adsorption isotherms of mixtures of linear alkanes, involving n-pentane, n-hexane, and n-heptane in pillared layered materials （PLMs） with three different porosities ψ-0.98, 0.94 and 0.87, and three pore widths H=1.02, 1.70 and 2.38 nm at temperature T=300 K were simulated by using configurational-bias Monte Carlo （CBMC） techniques in grand canonical ensemble. A grid model was employed to calculate the interaction between a fluid molecule and two layered boards here. For alkane mixtures, the n-heptane, the longest chain component in alkane mixtures, is preferentially adsorbed at low pressures, with its adsorption increasing and then decreasing as the pressure increases continuously while the n-pentane, the shortest chain component in alkane mixtures, is still adsorbed at high pressures; the adsorption of the longest chain component of alkane mixtures increases as the pore width and the porosity of PLMs increase. 相似文献
7.
《天津大学学报(英文版)》2018,(6)
A new scheme for the preparation of highly dispersed precious metal catalysts is proposed in this work. Samples of LaCo_(1-x)Pt_xO_3/SiO_2( x = 0.03, 0.05, 0.07, 0.09, and 0.10) were prepared through a simple method of citrate acid complexation combined with impregnation. In a nanocrystallite of LaCo_(1-x)Pt_xO_3, ions of lanthanum, cobalt, and platinum are evenly mixed at the atomic level and confined within the nanocrystallite. In the reduction process, platinum ions were reduced and migrated onto the surface of the nanocrystallite, and the platinum should be highly dispersed owing to the even mixing of the platinum ions in the precursor. When x = 0.05 or lower, the highest dispersion of Pt could be achieved. The highly dispersed Pt is stable, because of the strong interaction between Pt atoms and the support. The catalysts were characterized by BET surface area, temperature-programmed reduction, X-ray diff raction, transmission electron microscopy, CO temperatureprogrammed desorption, and turnover frequency. Compared with general precious metal Pt catalysts, the LaCo_(0.95)Pt_(0.05)O _3/SiO_2 catalyst exhibited better activity for CO oxidation, and it maintained stability at a high temperature of 400 ℃ for 250h with complete CO conversion. 相似文献
8.
A combined numerical model of thermal field and the primary dendrite arm spacing （PDAS） was proposed to correlate the process parameters and PDAS in laser welding of Cu and A1. The solidification parameters simulated by the finite volume method with commercial software ANASYS FLUENT were applied in the PDAS model to predict the dendrite arm spacing of fusion zone. Dendrite was also examined by the metallographic method to validate the model. Results indicate that the calculated PDAS agrees with metallographic measurements reasonably, especially the Hunt model. PDAS increases apparently with increasing laser power while decreases slightly with increasing welding speed. Increasing laser power increases the secondary dendrite and increasing welding speed increases the microporosity in dendrite. 相似文献
9.
The variation of the vibration characteristics of a Huanghua pear was investigated using finite element simulations. A new image processing technique was used to obtain the unsymmetrical and un-spherical geometrical model of a pear. The vibration characteristics of this type of pear with the correlation of its behavior with geometrical configurations and material characteristics were investigated using numerical modal analysis. The results showed that the eigenfrequency increased with the increasing pear Young＇s modulus, while decreased with increasing pear density, and decreased with increasing pear volume. The results of this study provided foundation for further investigations of the physical characteristics of fruits and vegetables by using finite element simulations. 相似文献
10.
Based on Hertz contact theory, a method to determine the parameters of Kelvin impact model for seismic pounding analysis of bridges is proposed. The impact stiffness of Kelvin model is determined by the ratio of maximum impact force to maximum contact deformation, which is calculated based on Hertz contact theory with considering the vibration effect. The restitution coefficient which has great influence on the damping coefficient of Kelvin impact model is investigated by numerical analysis. Numerical results indicate that the impact stiffness of Kelvin impact model increases with the increment of the Hertz contact stiffness, approaching velocity or the length ratio of short to long girders. Vibration effect has remarkable influence on the impact stiffness and cannot be neglected. The restitution coefficient decreases when approaching velocity increases or the length ratio of short girder to long girder decreasing. The practical ranges of impact stiffness and restitution coefficient are obtained as 3×108-6×108 N/m and 0.6-0.95 respectively. 相似文献
11.
Exchange coupling and magnetization reversal mechanism in two series of Co_xNi_(1-x)/CoO(30 nm)(x=0.2 and 0.4)bilayers are studied by vector magnetometer.Two components of magnetization are measured parallel and perpendicular to the applied field.At low temperatures,coercivity H_c∝(t_(FM))~(-n),n=1.5 and 1.38 for x=0.2 and 0.4,respectively,in agreement with the random field model.At room temperature,the coercivity is nearly proportional to the inverse FM layer thickness.In addition to the exchange field and the coercivity,the characteristic of the magnetization reversal mechanism was found to change with temperature.At temperatures below 180 K,magnetization reversal process along the unidirectional axis is accompanied only by nucleation and pinning of domain wall while magnetization rotation is also involved at high temperatures. 相似文献
12.
A rice mutant with Yaponica 9522 cultivar background Oryza sativa extraordinary glume 1 （Oseg 1） was identified from the M2 mutant pool mutagenized by ^60Co γ-ray. Compared with wild type plants, Oseg 1 developed longer empty glumes and rudimentary glumes. In some Oseg 1 mutants, the number of stamens of flowers was reduced and leaf-like lodicules occurred, and excessive lemma/palea-like organ could be observed in some mutant spikelets. This indicated that OsEG1 could regulate the development of rudimentary glumes, empty glumes, lemma/palea, lodicules, and stamens. Genetic analysis indicated that Oseg 1 came from a single recessive genetic locus. To clone OsEG1 gene, F2 population was constructed by a cross between Oseg 1 （Japonica） and Guangluai4 （Indica）. Using map-based cloning approach, OsEG1 was mapped on chromosome 4, between INDEL marker OS407 and WHM0466 with genetic distance of 2.0 cm and 1.0 cm, respectively. These results are useful for further cloning and functional analysis of the OsEG1 gene. 相似文献
13.
In this paper the effect of alloying elements on the environmental embrittlement of Ll2 type intermetallics is summarized. The results show that the ductilizing effect of boron doping in Ni3Al is mainly to suppress the moisture-induced environmental embrittlement. The mechanism of this suppression effect is proved
to be related to its severely reducing the hydrogen diffusivity along the grain boundaries. However, the boron doping in Co3Ti alloys does not have the same effect of suppressing the environmental embrittlement. The different behavior of boron doping
in Ni3Al and Co3Ti may be attributed to its different segregation behavior on the grain boundaries. Boron in Co3Ti does not segregate on the grain boundaries and can not effectively reduce the hydrogen diffusivity along the grain boundaries.
The moisture-induced environmental embrittlement of Co3Ti alloy can be completely suppressed by the addition of Fe. It is proved by Auger that this suppression effect is due to
its obvious reduction of the kinetics of the surface reaction with water vapor.
Supported by the National Natural Science Foundation of China (Grant No.59895157,59081415,59371002,59771007) 相似文献
14.
He XL Yin HL Wu J Zhang K Liu Y Yuan T Rao HL Li L Yang G Zhang XM 《Journal of Zhejiang University. Science. B》2011,12(1):32-39
Radiation therapy has been widely applied in cancer treatment. However, it often causes thrombocytopenia (deficiency of white
blood cells) as an adverse effect. Recombinant human interleukin-6 (rhIL-6) has been found to be a very effective way against
this thrombocytopenia, but IL-6 has low stability in blood, which reduces its efficacy. To increases the stability and half-life
of rhIL-6, it was modified by polyethylene glycol (PEG). The pharmacokinetics and the tissue distribution of PEG-rhIL-6 labeled
with 125I were examined after subcutaneous injection in rats. The pharmacokinetic pattern of PEG-rhIL-6 was defined with linear-kinetics,
and we fitted a one-compartment model with half-lives of 10.44–11.37 h (absorption, t
1/2K
a) and 19.77–21.53 h (elimination, t
1/2Ke), and peak concentrations at 20.51–21.96 h (t
peak) in rats. Half-lives and t
peak of PEG-rhIL-6 were longer than those of rhIL-6 previously reported. In the present study, for deposition of PEG-rhIL-6 in
rats, the tissue distribution examination showed that blood was the major organ involved, rather than liver. However, as to
the elimination of PEG-rhIL-6, the major organ was the kidney. The excretion fraction of the injection dose recovered from
urine was 23.32% at 192 h after subcutaneous administration. Less than 6% of PEG-rhIL-6 was eliminated via the feces at 192
h. These results indicate that PEG-rhIL-6 is a good candidate drug formulation for patients with cancer. 相似文献
15.
LU Li-gang YAN Li-tan XIANG Li-chi 《浙江大学学报(A卷英文版)》2007,8(1):158-163
INTRODUCTION Throughout this paper, we shall work with a filtered complete probability space (?,F,(Ft),P) sat-isfying the usual conditions. Let B=(Bt)t≥0 be a stan-dard Brownian motion with B0=0. Denote by ú the set of all non-negative real numbers. Recall that a diffusion process X starting at x≥0 is called the square of a Bessel process of dimension δ>0 if d X t = δd t 2 | X t |d Bt , X 0= x, (1) Clearly, this equation has a unique non-negative strong solution X, i.e., … 相似文献
16.
In this paper, crude monkshood polysaccharide was isolated from Radix Aconiti Lateralis Preparata. The effects of crude monkshood
polysaccharide on Escherichia coli and Staphylococcus aureus were investigated by microcalorimetry. The power-time curves of the bacterial growth at various concentrations (c) of crude monkshood polysaccharide were plotted with a TAM air isothermal microcalorimeter at 37 °C. The growth rate constant
(μ), inhibitory ratio (I), peak-height (P
m), and peak-time (t
m) were calculated. From the data, the relationship between μ and c also was established. The growth rate constant μ decreased with the increasing concentrations of crude monkshood polysaccharide.
Moreover, P
m reduced and t
m increased with increasing concentrations. The experimental results revealed that crude monkshood polysaccharide had inhibitory
activity towards S. aureus and E. coli. Results obtained from our study strongly suggest that microcalorimetry is a fast, simple, and more sensitive technology
that can be easily performed to study the effect of drugs on bacteria. 相似文献
17.
1 Ｉｎｔｒｏｄｕｃｔｉｏｎ Ｉｎｔｈｅｐａｓｔｄｅｃａｄｅｏｒｓｏ ,ｔｈｅｅｘｉｓｔｅｎｃｅｏｆｇｌｏｂａｌａｔ ｔｒａｃｔｏｒｓａｎｄｔｈｅｅｓｔｉｍａｔｅｓｏｆｔｈｅｉｒＨａｕｓｄｏｒｆｆａｎｄｆｒａｃｔａｌｄｉｍｅｎｓｉｏｎｓｈａｖｅｂｅｅｎｉｎｖｅｓｔｉｇａｔｅｄｆｏｒｎｕｍｅｒｏｕｓｄｉｓｓｉｐａ ｔｉｖｅｎｏｎｌｉｎｅａｒｐａｒｔｉａｌｄｉｆｆｅｒｅｎｔｉａｌｅｑｕａｔｉｏｎｓｗｈｉｃｈａｒｅａｕ ｔｏｎｏｍｏｕｓ[1～ 4 ].Ｔｈｅｎｏｎ ａｕｔｏｎｏｍｏｕｓｉｎｆｉｎｉｔｅ ｄｙｎａｍｉ… 相似文献
18.
Alloying is an effective way to manipulate the composition and physico-chemical properties of functional materials. We demonstrated the syntheses of alloyed Co x Ni1?x O nanocrystals using a nonaqueous approach, with x continuously tuned from 0 to 1 by varying the molar ratios of the cobalt precursor in the reagents. The morphological, structural, and compositional properties of the alloyed Co x Ni1?x O nanocrystals were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and energy dispersive X-ray spectroscopy (EDS). The results showed that the cobalt and nickel atoms were homogeneously distributed in the alloyed nanocrystals. The as-prepared Co x Ni1?x O nanocrystals can be applied as the hole-transporting layers in polymer light emitting diodes (PLEDs). Our study provides a good example for the syntheses of alloyed oxide nanocrystals with continuously tunable composition. 相似文献
19.
Ba0.6Sr0.4TiO3 （BST） thin films with and without HfO 2 buffer layer were fabricated on Pt/Ti/SiO2/Si substrates by pulsed laser deposition. Dependences of HfO 2 thickness on the dielectric property and leakage current of BST thin films were focused. The dielectric constant of BST thin films increased and then decreased with the increase of HfO 2 thickness, while the dielectric relaxation was gradually improved. The loss tangent and leakage current under positive bias decreased with the HfO 2 thickness increasing. The leakage current analysis based on the Schottky emission indicated an improvement of the BST/Pt interface with HfO 2 buffer layer. The loss tangent, tunability and figure of merit of optimized HfO 2 buffered BST thin film achieved 0.009 8, 21.91% （E max = 200 kV/cm）, 22.40 at 10 6 Hz, respectively. 相似文献
20.
Tracing developmental pathways of immigrant-origin adolescents, this 3-year longitudinal study (2012–2015) examined within-person changes in cultural orientations and their consequences for school adjustment. Multivariate latent growth mixture modeling confirmed multiple pathways of integration, revealing variable acculturative changes along dual trajectories of heritage and mainstream orientations among European-origin (N = 592, Mage = 14.45, 55.1% boys) and Turkish- and Moroccan-origin adolescents (N = 1269, Mage = 14.70, 53.1% boys). Two trajectories for European-origin adolescents differed in heritage orientations (high decreasing and low increasing); for Turkish- and Moroccan-origin adolescents, three trajectories differed in mainstream orientations (high stable, low increasing, and high decreasing). Acculturative change affected aspects of later school adjustment: European-origin adolescents in high heritage orientation trajectories reported more belonging and emotional engagement; Turkish- and Moroccan-origin adolescents in high mainstream orientation trajectories reported more behavioral engagement. 相似文献