首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 928 毫秒
1.
The purpose of this study was to investigate effects of the ground reaction forces on the rotation of the body as a whole and on the joint torques of the lower limbs associated with trunk and pelvic rotation in baseball tee batting. A total of 22 male collegiate baseball players participated in this study. Three-dimensional coordinate data were acquired by a motion capture system (250 Hz), and ground reaction forces of both legs were measured with three force platforms (1,000 Hz). Kinetic data were used to calculate the moment about the vertical axis through the body’s centre of mass resulting from ground reaction forces, as well as to calculate the torque and mechanical work in the lower limb joints. The lateral/medial ground reaction force generated by both legs resulted in the large whole body moment about its vertical axis. The joint torques of flexion/extension of both hips, adduction of the stride hip and extension of the stride knee produced significantly larger mechanical work than did the other joint torques. To obtain high bat-head speed, the batter should push both legs in the lateral/medial direction by utilising both hips and stride knee torques so as to increase the whole body rotation.  相似文献   

2.
This study aimed to clarify the differences between the horizontal single-leg rebound jump (HJ) and vertical single-leg rebound jump (VJ) in terms of three-dimensional joint kinetics for the take-off leg, while focusing on frontal and transverse plane movements. Eleven male track and field athletes performed HJ and VJ. Kinematic and kinetic data were calculated using data recorded with a motion capture system and force platforms. The hip abduction torque, trunk lateral flexion torque (flexion for the swing-leg side), hip external and internal torque, trunk rotational torque, and the powers associated with these torques were larger when performing HJ because of resistance to the impact ground reaction force and because of pelvic and posture control. Pelvic rotation was noted in HJ, and this was controlled not only by the hip and trunk joint torque from the transverse plane but also by the hip abduction torque. Therefore, hip and trunk joint kinetics in the frontal and transverse plane play an important role in a single-leg jump, regardless of the jumping direction, and may also play a more important role in HJ than in VJ.  相似文献   

3.
The purpose of this study was to determine hip joint kinetics during a table tennis topspin forehand, and to investigate the relationship between the relevant kinematic and kinetic variables and the racket horizontal and vertical velocities at ball impact. Eighteen male advanced table tennis players hit cross-court topspin forehands against backspin balls. The hip joint torque and force components around the pelvis coordinate system were determined using inverse dynamics. Furthermore, the work done on the pelvis by these components was also determined. The peak pelvis axial rotation velocity and the work done by the playing side hip pelvis axial rotation torque were positively related to the racket horizontal velocity at impact. The sum of the work done on the pelvis by the backward tilt torques and the upward joint forces was positively related to the racket vertical velocity at impact. The results suggest that the playing side hip pelvis axial rotation torque exertion is important for acquiring a high racket horizontal velocity at impact. The pelvis backward tilt torques and upward joint forces at both hip joints collectively contribute to the generation of the racket vertical velocity, and the mechanism for acquiring the vertical velocity may vary among players.  相似文献   

4.
The purpose of this study was to investigate joint kinetics of the throwing arms and role of trunk motion in skilled elementary school boys during an overarm distance throw. Throwing motions of 42 boys from second, fourth, and sixth grade were videotaped with three high-speed cameras operating at 300 fps. Seven skilled boys from each grade were selected on the basis of throwing distance for three-dimensional kinetic analysis. Joint forces, torques, and torque powers of the throwing arm joints were calculated from reconstructed three-dimensional coordinate data smoothed at cut-off frequencies of 10.5–15 Hz and by the inverse dynamics method. Throwing distance and ball velocity significantly increased with school grade. The angular velocity of elbow extension before ball release increased with school grade, although no significant increase between the grades was observed in peak extension torque of elbow joint. The joint torque power of shoulder internal/external rotation tended to increase with school grade. When teaching the overarm throw, elementary school teachers should observe large backward twisting of trunk during the striding phase and should keep in mind that young children, such as second graders (age 8 years), will be unable to effectively utilise shoulder external/internal rotation during the throwing phase.  相似文献   

5.
Abstract

We aimed to demonstrate the changes over time in the lengths and forces of the muscles crossing the hip joint during overground sprinting and investigate the relationships between muscle lengths and muscle–tendon unit forces – particularly peak biceps femoris force. We obtained three-dimensional kinematics during 1 running cycle from 8 healthy sprinters sprinting at maximum speed. Muscle lengths and muscle–tendon unit forces were calculated for the iliacus, rectus femoris, gluteus maximus, and biceps femoris muscles of the target leg as well as the contralateral iliacus and rectus femoris. Our results showed that during sprinting, the muscles crossing the hip joint demonstrate a stretch-shortening cycle and 1 or 2 peak forces. The timing of peak biceps femoris force, expressed as a percentage of the running cycle (mean [SD], 80.5 [2.9]%), was synchronous with those of the maximum biceps femoris length (82.8 [1.9]%) and peak forces of the gluteus maximus (83.8 [9.1]%), iliacus (81.1 [5.2]%), and contralateral iliacus (78.5 [5.8]%) and also that of the peak pelvic anterior tilt. The force of the biceps femoris appeared to be influenced by the actions of the muscles crossing the hip joint as well as by the pelvic anterior tilt.  相似文献   

6.
During sidestep cutting, the pelvis is supported only on one side; this affects the athlete’s posture. This study investigated the mechanism to avoid excessive pelvic obliquity during sidestep cutting. Ten physically active men performed sidestep cutting with maximal effort, and we captured the kinematics and kinetics with force platforms and an eight-camera motion capture system. Our results indicated that the stance hip exerted little abduction torque; however, lumbosacral lateral flexion torque was exerted towards the free-leg side (peak value: 3.39 ± 0.91 N m/kg). Although bilateral hip joint forces acted to drop the free-leg side of the pelvis, the net torque around pelvic elevation/drop axis was nearly zero during the entire stance phase and the change in the angular momentum around the pelvic elevation/drop axis from touchdown to toe-off was negligible (?0.004 ± 0.003 N m s/kg). The integrated components of lateral flexor for elevating the free-leg side of the pelvis (0.220 ± 0.072 N m s/kg) were significantly larger than any other integrated components, which were all negligible (<0.010 N m s/kg). Thus, sidestep cutting requires the lumbosacral lateral flexion torque exertion to neutralise the passive action that drops the free-leg side of the pelvis.  相似文献   

7.
The purpose of this study was to investigate the effect of hip external rotation (turnout) on lower limb kinetics during vertical jumps by classical ballet dancers. Vertical jumps in a turnout (TJ) and a neutral hip position (NJ) performed by 12 classical female ballet dancers were analysed through motion capture, recording of the ground reaction forces, and inverse dynamics analysis. At push-off, the lower trunk leaned forward 18.2° and 20.1° in the TJ and NJ, respectively. The dancers jumped lower in the TJ than in the NJ. The knee extensor and hip abductor torques were smaller, whereas the hip external rotator torque was larger in the TJ than in the NJ. The work done by the hip joint moments in the sagittal plane was 0.28 J/(Body mass*Height) and 0.33 J/(Body mass*Height) in the TJ and NJ, respectively. The joint work done by the lower limbs were not different between the two jumps. These differences resulted from different planes in which the lower limb flexion–extension occurred, i.e. in the sagittal or frontal plane. This would prevent the forward lean of the trunk by decreasing the hip joint work in the sagittal plane and reduce the knee extensor torque in the jump.  相似文献   

8.
ABSTRACT

The aim of this study was to investigate the kinetic functions of the lower limbs at different hitting-point heights to provide key information for improving batting technique in baseball players. Three-dimensional coordinate data were acquired using a motion capture system (250 Hz) and ground reaction forces were measured using three force platforms (1000 Hz) in 22 male collegiate baseball players during tee-batting set at three different hitting-point heights (high, middle, and low). Kinetic data were used to calculate joint torque and mechanical work in the lower limbs by the inverse dynamics approach. The peak angular velocity of the lower trunk about the vertical axis was smaller under the low condition. The joint torques and mechanical works done by both hip adduction/abduction axes were different among the three conditions. These results indicate that hip adduction/abduction torques mainly contribute to a change in the rotational movement of the lower body about the vertical axis when adjusting for different hitting-point heights. In order to adjust for the low hitting-point height which would be difficult compared with other hitting-point heights, batters should focus on rotating the lower trunk slowly by increasing both hip abduction torques.  相似文献   

9.
Abstract

Anterior cruciate ligament (ACL) rupture, during ski-landing, is caused by excessive knee joint forces and kinematics, like anterior tibial translation, internal tibial rotation, and valgus rotation. It is not well understood how these forces/kinematics are directly related to ski-landing impact. In the present study, we applied simulated ski-landing impact to knee specimens, and examined joint force/kinematic responses and their correlations with impact force. Ten human cadaveric knees were subjected to axial impact loading at 70° of flexion to simulate ski-landing impact. Impact was repeated with incremental magnitude until ACL failure. Axial impact forces, anterior-posterior and medial-lateral tibial forces were measured using a tri-axial load cell. Anterior-posterior tibial translation, internal-external tibial rotation, and valgus-varus rotation were determined using a motion-capture system. We found positive correlations of axial impact force with anterior tibial force, medial tibial force, anterior tibial translation, internal tibial rotation, and valgus joint rotation. Axial impact forces were more strongly correlated with anterior tibial forces (R 2 = 0.937 ± 0.050), anterior tibial translation (R 2 = 0.916 ± 0.059), and internal tibial rotation (R 2 = 0.831 ± 0.141) than medial tibial force (R 2 = 0.677 ± 0.193) and valgus joint rotation (R 2 = 0.630+0.271). During ski-landing, these joint forces/kinematics can synergistically act to increase ACL injury risk, whereby the failure mechanism would be dominated by anterior tibial forces, anterior tibial translation, and internal tibial rotation.  相似文献   

10.
Understanding of the inter-joint coordination between rotational movement of each hip and trunk in golf would provide basic knowledge regarding how the neuromuscular system organises the related joints to perform a successful swing motion. In this study, we evaluated the inter-joint coordination characteristics between rotational movement of the hips and trunk during golf downswings. Twenty-one right-handed male professional golfers were recruited for this study. Infrared cameras were installed to capture the swing motion. The axial rotation angle, angular velocity and inter-joint coordination were calculated by the Euler angle, numerical difference method and continuous relative phase, respectively. A more typical inter-joint coordination demonstrated in the leading hip/trunk than trailing hip/trunk. Three coordination characteristics of the leading hip/trunk reported a significant relationship with clubhead speed at impact (r < ?0.5) in male professional golfers. The increased rotation difference between the leading hip and trunk in the overall downswing phase as well as the faster rotation of the leading hip compared to that of the trunk in the early downswing play important roles in increasing clubhead speed. These novel inter-joint coordination strategies have the great potential to use a biomechanical guideline to improve the golf swing performance of unskilled golfers.  相似文献   

11.
Curve running requires the generation of centripetal force altering the movement pattern in comparison to the straight path run. The question arises which kinematic modulations emerge while bend sprinting at high velocities. It has been suggested that during curve sprints the legs fulfil different functions. A three-dimensional motion analysis (16 high-speed cameras) was conducted to compare the segmental kinematics of the lower extremity during the stance phases of linear and curve sprints (radius: 36.5 m) of six sprinters of national competitive level. Peak joint angles substantially differed in the frontal and transversal plane whereas sagittal plane kinematics remained unchanged. During the prolonged left stance phase (left: 107.5 ms, right: 95.7 ms, straight: 104.4 ms) the maximum values of ankle eversion (left: 12.7°, right: 2.6°, straight: 6.6°), hip adduction (left: 13.8°, right: 5.5°, straight: 8.8°) and hip external rotation (left: 21.6°, right: 12.9°, straight: 16.7°) were significantly higher. The inside leg seemed to stabilise the movement in the frontal plane (eversion–adduction strategy) whereas the outside leg provided and controlled the motion in the horizontal plane (rotation strategy). These results extend the principal understanding of the effects of curve sprinting on lower extremity kinematics. This helps to increase the understanding of nonlinear human bipedal locomotion, which in turn might lead to improvements in athletic performance and injury prevention.  相似文献   

12.
The purpose of this study was to determine the kinematic patterns that maximized the vertical force produced during the water polo eggbeater kick. Twelve water polo players were tested executing the eggbeater kick with the trunk aligned vertically and with the upper limbs above water while trying to maintain as high a position as possible out of the water for nine eggbeater kick cycles. Lower limb joint angular kinematics, pitch angles and speed of the feet were calculated. The vertical force produced during the eggbeater kick cycle was calculated using inverse dynamics for the independent lower body segments and combined upper body segments, and a participant-specific second-degree regression equation for the weight and buoyancy contributions. Vertical force normalized to body weight was associated with hip flexion (average, r = 0.691; maximum, r = 0.791; range of motion, r = 0.710), hip abduction (maximum, r = 0.654), knee flexion (average, r = 0.716; minimum, r = 0.653) and knee flexion-extension angular velocity (r = 0.758). Effective orientation of the hips resulted in fast horizontal motion of the feet with positive pitch angles. Vertical motion of the feet was negatively associated with vertical force. A multiple regression model comprising the non-collinear variables of maximum hip abduction, hip flexion range of motion and knee flexion angular velocity accounted for 81% of the variance in normalized vertical force. For high performance in the water polo, eggbeater kick players should execute fast horizontal motion with the feet by having large abduction and flexion of the hips, and fast extension and flexion of the knees.  相似文献   

13.
An analytical biomechanical model was developed to establish the relevant properties of the Smith squat exercise, and the main differences from the free barbell squat. The Smith squat may be largely patterned to modulate the distributions of muscle activities and joint loadings. For a given value of the included knee angle (θ(knee)), bending the trunk forward, moving the feet forward in front of the knees, and displacing the weight distribution towards the forefoot emphasizes hip and lumbosacral torques, while also reducing knee torque and compressive tibiofemoral and patellofemoral forces (and vice versa). The tibiofemoral shear force φ(t) displays more complex trends that strongly depend on θ(knee). Notably, for 180° ≥ θ(knee) ≥ 130°, φ(t) and cruciate ligament strain forces can be suppressed by selecting proper pairs of ankle and hip angles. Loading of the posterior cruciate ligament increases (decreases) in the range 180° ≥ θ(knee) ≥ 150° (θ(knee) ≤ 130°) with knee extension, bending the trunk forward, and moving the feet forward in front of the knees. In the range 150° > θ(knee) > 130°, the behaviour changes depending on the foot weight distribution. The conditions for the development of anterior cruciate ligament strain forces are explained. This work enables careful use of the Smith squat in strengthening and rehabilitation programmes.  相似文献   

14.
目的:对辽宁省排球队女运动员下肢急停纵跳落地时的力矩和最大关节角度进行研究,以期对有膝关节损伤的排球运动员进行科学训练提供参考。方法:以14名辽宁省排球队女运动员为研究对象,将运动员分为两组,其中无伤组8人,损伤组6人,采用三维测力平台和红外光电运动捕捉系统,记录受试者在完成急停纵跳动作落地时的髋关节、膝关节、踝关节的力矩以及最大关节角度数据。结果:在急停纵跳落地时,损伤膝关节的旋转、收展力矩大于无伤组,屈伸力矩小于无伤组,损伤组的髋关节的屈伸、收展、旋转力矩均大于无伤组;损伤组的踝关节旋转力矩小于无伤组,收展力矩和屈伸力矩大于无伤组。损伤组的踝关节在屈伸、收展和旋转时的最大关节角度大于无伤组;损伤组的膝关节在屈伸和收展时的最大关节角度大于无伤组,旋转时小于无伤组;损伤的髋关节屈伸和收展时的最大关节角度大于无伤组,髋关节旋转时的最大关节角度左侧小于无伤组,右侧大于无伤组。结论:膝关节损伤的运动员完成急停纵跳动作落地时,通过代偿性改变增大髋关节力矩、增加膝关节旋转和收展力矩,增大踝关节收展和屈伸力矩,增加膝关节和髋关节在屈伸和收展时活动角度,增加膝关节屈伸和收展时活动角度来完成动作。  相似文献   

15.
Abstract

We aimed to illustrate support leg dynamics during instep kicking to evaluate the role of the support leg action in performance. Twelve male soccer players performed maximal instep kicks. Their motions and ground reaction forces were recorded by a motion capture system and a force platform. Moments and angular velocities of the support leg and pelvis were computed using inverse dynamics. In most joints of the support leg, the moments were not associated with or counteracting the joint motions except for the knee joint. It can be interpreted that the initial knee flexion motion counteracting the extension joint moment has a role to attenuate the shock of landing and the following knee extension motion associated with the extension joint moment indirectly contributes to accelerate the swing of kicking leg. Also, appreciable horizontal rotation of the pelvis coincided with increase of the interaction moment due to the hip joint reaction force on the support leg side. It can be assumed that the interaction moment was the main factor causing the pelvis counter-clockwise rotation within the horizontal plane from the overhead view that precedes a proximal-to-distal sequence of segmental action of the swing leg.  相似文献   

16.
Twenty-five volleyball players (14 males, 11 females) were videotaped (60 Hz) performing countermovement vertical jumps with and without an arm swing. Ground reaction force and video-based coordinate data were collected simultaneously. The resultant joint force and torque at the hip, knee, ankle and shoulder for two trials per subject per condition were computed and normalized. Average kinematic, resultant joint force and torque data were compared using repeated-measures analysis of variance. Larger values were recorded for the vertical velocity of the centre of mass at take-off in the jumps with (mean 2.75, s = 0.3 m.s-1) versus without (mean 2.44, s = 0.23 m.s-1) an arm swing. The jumps with no arm swing produced larger torques at the hip during the first third of the propulsive phase (from zero to maximum vertical velocity of the centre of mass). During the final two-thirds of the propulsive phase, the arm swing augmented hip extensor torques by slowing the rate of trunk extension and placing the hip extensor muscles in slower concentric conditions that favoured the generation of larger forces and resultant joint torques. During the first two-thirds of the propulsive phase, knee extensor torque increased by 28% in the jumps with an arm swing, but maintained a relatively constant magnitude in the jumps with no arm swing.  相似文献   

17.
Twenty-five volleyball players (14 males, 11 females) were videotaped (60Hz) performing countermovement vertical jumps with and without an arm swing. Ground reaction force and video-based coordinate data were collected simultaneously. The resultant joint force and torque at the hip, knee, ankle and shoulder for two trials per subject per condition were computed and normalized. Average kinematic, resultant joint force and torque data were compared using repeated-measures analysis of variance. Larger values were recorded for the vertical velocity of the centre of mass at take-off in the jumps with (mean 2.75, s=0.3m.s-1) versus without (mean 2.44, s= 0.23m.s-1) an arm swing. The jumps with no arm swing produced larger torques at the hip during the first third of the propulsive phase (from zero to maximum vertical velocity of the centre of mass). During the final two-thirds of the propulsive phase, the arm swing augmented hip extensor torques by slowing the rate of trunk extension and placing the hip extensor muscles in slower concentric conditions that favoured the generation of larger forces and resultant joint torques. During the first two-thirds ofthe propulsive phase, knee extensor torque increased by 28% in the jumps with an arm swing, but maintained a relatively constant magnitude in the jumps with no arm swing.  相似文献   

18.
This study analyzed the joint torque and the mechanical energy flow in the support legs of skilled male race walkers. Twelve race walkers were videotaped using a high-speed camera at a frame rate of 250 Hz set perpendicular to the sagittal plane of motion; their ground reaction forces were measured with two force platforms. A two-dimensional, 14-segment, linked model was used to calculate the kinetics of the support leg joints. In the initial part of the support phase, the mechanical energy flowed into the thigh and shank by the torque of the large hip extensors and knee flexors. In the middle part, the mechanical energy generated by the torque of the large plantar flexors flowed to the foot and from the foot to the shank by the ankle joint force. The mechanical energy flow by the forward joint force of the support hip was significantly related to the walking speed in the final part of the support phase. Our findings suggest that race walkers in the final part of the support phase should exert the torque of the knee extensors and hip flexors to transfer the mechanical energy more effectively to the support thigh and shank.  相似文献   

19.
The aim of the present study was to compare kinetically the roles of the lower extremities in generating trunk rotation in the tennis one-handed and two-handed backhand strokes. Fourteen male collegiate tennis players, seven with a preference for the one- and seven with a preference for the two-handed technique, were recruited as participants. The motion of each backhand stroke was filmed using two high-speed cine-cameras, and the ground reaction forces on the feet were measured separately using two force platforms to determine the joint moments and joint reaction forces at the hip, knee and ankle joints. A significant difference in hip joint moments between the two types of stroke was found in the phase from the start of forward rotation of the pelvis to the start of racket forward movement. For trunk rotation, the one-handed backhand players exerted a large joint moment in the front leg, whereas the two-handed backhand players exerted a large joint moment in the back leg. The exertion of a large hip joint moment in the latter stroke was comparable with the exertion in a forehand stroke reported previously.  相似文献   

20.
The aim of the present study was to compare kinetically the roles of the lower extremities in generating trunk rotation in the tennis one-handed and two-handed backhand strokes. Fourteen male collegiate tennis players, seven with a preference for the one- and seven with a preference for the two-handed technique, were recruited as participants. The motion of each backhand stroke was filmed using two high-speed cine-cameras, and the ground reaction forces on the feet were measured separately using two force platforms to determine the joint moments and joint reaction forces at the hip, knee and ankle joints. A significant difference in hip joint moments between the two types of stroke was found in the phase from the start of forward rotation of the pelvis to the start of racket forward movement. For trunk rotation, the one-handed backhand players exerted a large joint moment in the front leg, whereas the two-handed backhand players exerted a large joint moment in the back leg. The exertion of a large hip joint moment in the latter stroke was comparable with the exertion in a forehand stroke reported previously.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号